3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownINA823DGKR
Texas Instruments · Instrumentation Amplifiers · MSOP-8
INA823DGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain-setting pin. Place an external gain resistor R_G between pin 1 and pin 8; gain is set by G = 1 + 100 kΩ / R_G (range G = 1 to 10,000). |
| 2 | -IN | input | Negative (inverting) instrumentation amplifier input. Input overvoltage protection to ±60 V; usable input range extends 150 mV below the negative supply. |
| 3 | +IN | input | Positive (noninverting) instrumentation amplifier input. Input overvoltage protection to ±60 V; usable input range extends 150 mV below the negative supply. |
| 4 | -VS | power_in | Negative supply rail. Single-supply operation uses -VS = GND with +VS = 2.7 V to 36 V; dual-supply operation uses ±1.35 V to ±18 V. |
| 5 | REF | input | Reference input that sets the output common-mode voltage. Must be driven by a low-impedance source; input impedance is 100 kΩ and reference gain to output is 1 V/V. |
| 6 | OUT | output | Amplifier output. Output swings to within 0.15 V of each supply rail; short-circuit current is continuous to V_S / 2 (typ ±20 mA). |
| 7 | +VS | power_in | Positive supply rail. Single-supply 2.7 V to 36 V, or dual-supply ±1.35 V to ±18 V. Quiescent current is 180 µA (typ). |
| 8 | RG | passive | Gain-setting pin. Place an external gain resistor R_G between pin 1 and pin 8; gain is set by G = 1 + 100 kΩ / R_G. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
INA823DGKRINA823DGKRDINA823DGKRDR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, dual supply (absolute maximum) | VS | 20 | V | Dual supply, VS = (+VS) – (–VS); printed as ± 20 | 4 | ||
| Supply voltage, single supply (absolute maximum) | VS | 40 | V | Single supply, VS = (+VS) | 4 | ||
| RG pins current | -10 | 10 | mA | 4 | |||
| OUT pin current | -50 | 50 | mA | 4 | |||
| Operating temperature | TA | -50 | 150 | °C | 4 | ||
| Junction temperature | TJ | 175 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage, single supply (recommended) | VS | 2.7 | 36 | V | Single supply, VS = (+VS) | 4 | |
| Supply voltage, dual supply (recommended) | VS | 1.35 | 18 | V | Dual supply, VS = (+VS) – (–VS); printed as ±1.35 V to ±18 V | 4 | |
| Specified temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | 167.5 | °C/W | DGK (VSSOP) 8-pin | 4 | ||
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | 60.3 | °C/W | DGK (VSSOP) 8-pin | 4 | ||
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | 88.7 | °C/W | DGK (VSSOP) 8-pin | 4 | ||
| Junction-to-top characterization parameter (DGK, VSSOP) | ψJT | 7.9 | °C/W | DGK (VSSOP) 8-pin | 4 | ||
| Junction-to-board characterization parameter (DGK, VSSOP) | ψJB | 87.1 | °C/W | DGK (VSSOP) 8-pin | 4 | ||
| Input stage offset voltage | VOSI | 20 | 100 | µV | 5 | ||
| Input stage offset voltage over temperature | VOSI | 190 | µV | TA = –40°C to +125°C | 5 | ||
| Input stage offset voltage drift | 0.2 | 1.2 | µV/°C | 5 | |||
| Output stage offset voltage | VOSO | 140 | 450 | µV | 5 | ||
| Output stage offset voltage over temperature | VOSO | 850 | µV | TA = –40°C to +125°C | 5 | ||
| Output stage offset voltage drift | 1 | 5 | µV/°C | 5 | |||
| Power-supply rejection ratio, G = 1 | PSRR | 100 | 130 | dB | VS = ±1.35 V to ±18 V, G = 1, RTI | 5 | |
| Power-supply rejection ratio, G = 10 | PSRR | 115 | 148 | dB | VS = ±1.35 V to ±18 V, G = 10, RTI | 5 | |
| Power-supply rejection ratio, G = 100 | PSRR | 120 | 148 | dB | VS = ±1.35 V to ±18 V, G = 100, RTI | 5 | |
| Power-supply rejection ratio, G = 1000 | PSRR | 120 | 148 | dB | VS = ±1.35 V to ±18 V, G = 1000, RTI | 5 | |
| Input overvoltage | -60 | 60 | V | TA = –40°C to +125°C | 5 | ||
| Common-mode rejection ratio, G = 1 | CMRR | 84 | 110 | dB | At dc to 60 Hz, RTI, VCM = (V–) –0.15 V to (V+) – 1 V, G = 1 | 5 | |
| Common-mode rejection ratio, G = 10 | CMRR | 104 | 136 | dB | At dc to 60 Hz, RTI, VCM = (V–) –0.15 V to (V+) – 1 V, G = 10 | 5 | |
| Common-mode rejection ratio, G ≥ 100 | CMRR | 120 | 149 | dB | At dc to 60 Hz, RTI, VCM = (V–) –0.15 V to (V+) – 1 V, G ≥ 100 | 5 | |
| Input bias current | IB | 1.2 | 8 | nA | 5 | ||
| Input offset current | IOS | 0.4 | 4 | nA | 5 | ||
| Gain range | G | 1 | 10000 | V/V | 6 | ||
| Gain error, G = 1 | GE | -0.04 | 0.01 | 0.04 | % | VO = ±10 V, G = 1 | 6 |
| Gain error, G = 10 | GE | -0.2 | 0.025 | 0.2 | % | VO = ±10 V, G = 10 | 6 |
| Gain error, G = 100 | GE | -0.2 | 0.025 | 0.2 | % | VO = ±10 V, G = 100 | 6 |
| Gain error, G = 1000 | GE | -0.2 | 0.05 | 0.2 | % | VO = ±10 V, G = 1000 | 6 |
| Gain drift, G = 1 | -5 | 0.2 | 5 | ppm/°C | TA = –40°C to +125°C, G = 1 | 6 | |
| Gain drift, G > 1 | -35 | 12 | 35 | ppm/°C | TA = –40°C to +125°C, G > 1 (excludes RG) | 6 | |
| Gain nonlinearity, G = 1 to 10 | 2 | 10 | ppm | G = 1 to 10 | 6 | ||
| Short-circuit current | ISC | -20 | 20 | mA | Continuous to VS / 2 | 6 | |
| Load capacitance | 1000 | pF | Stable operation | 6 | |||
| Reference gain error | 0.01 | 0.05 | % | Inside the output voltage swing | 6 | ||
| Quiescent current | IQ | 180 | 250 | µA | VIN = 0 V | 6 | |
| Quiescent current over temperature | IQ | 300 | µA | TA = –40°C to +125°C | 6 |
CAD (KiCad official)
- Symbol:
INA823DGKR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ina823dgkr-etched.step/ina823dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina823dgkr.step/ina823dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
cb9223248a51774c, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).