Generated by kicad-footprint-generator · KiCad file format 20260206
INA331AIDGKT
Texas Instruments · Instrumentation Amplifiers · VSSOP-8
INA331AIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain-setting resistor terminal; connect external resistors between this pin and V- to set gain G = 5 + 5(R2/R1) for gains greater than 5V/V. |
| 2 | VIN- | power_in | Negative differential input signal terminal; common-mode range 0.55V to 3.8V at 5V supply; input impedance 10¹³Ω |
| 3 | VIN+ | power_in | Positive differential input signal terminal; common-mode range 0.55V to 3.8V at 5V supply; input impedance 10¹³Ω |
| 4 | V- | power_in | Negative power supply pin (ground in single-supply or negative rail in dual-supply mode); maximum supply voltage V+ to V- of 7.5V. |
| 5 | REF | input | Reference voltage input defining zero output level; requires low-impedance source ≤160Ω to preserve CMRR ≥80dB. |
| 6 | VOUT | output | Amplified differential output signal; swings within 50mV of supply rails for gains ≥10 with 10kΩ load; slew rate 5V/µs typical. |
| 7 | V+ | power_in | Positive power supply input; specified operating range +2.7V to +5.5V with quiescent current 415µA to 490µA. |
| 8 | Shutdown | input | Shutdown control input; pull below 0.8V to enter sleep mode drawing <2µA; float or tie to V+ for normal operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage, RTI | -500 | 250 | 500 | µV | VS = +5V | 3 | |
| Input Offset Voltage over temperature | VOS | -2.1 | 1.7 | 2.1 | mV | Over Temperature | 3 |
| Power Supply Rejection Ratio vs Power Supply | PSRR | -200 | 50 | 200 | µV/V | VS = +2.7V to +5.5V | 3 |
| Common-Mode Rejection Ratio | CMRR | 90 | 94 | dB | VS = 5V, VCM = 0.55V to 3.8V | 3 | |
| Common-Mode Rejection Ratio, –40°C to +85°C | CMRR | 77 | dB | –40°C to +85°C, VS = 5V, VCM = 0.55V to 3.8V | 3 | ||
| Common-Mode Rejection Ratio over temperature | CMRR | 72 | dB | Over Temperature, VS = 5V, VCM = 0.55V to 3.8V | 3 | ||
| Input Common-Mode Range | 0.35 | 1.5 | V | VS = 2.7V | 3 | ||
| Input Common-Mode Range | 0.55 | 3.8 | V | VS = 5V | 3 | ||
| Input Bias Current | IB | -10 | 0.5 | 10 | pA | VCM = VS /2 | 3 |
| Input Offset Current | IOS | -10 | 0.5 | 10 | pA | VCM = VS /2 | 3 |
| Range of Gain | 5 | 1000 | V/V | 3 | |||
| Gain Error | -0.1 | 0.02 | 0.1 | % | G = 5 | 3 | |
| Gain Error vs Temperature | -10 | 2 | 10 | ppm/°C | G = 5 | 3 | |
| Nonlinearity | -0.01 | 0.001 | 0.01 | % of FS | G = 25, VS = 5V, VO = 0.05 to 4.95 | 3 | |
| Nonlinearity over temperature | -0.015 | 0.002 | 0.015 | % of FS | Over Temperature | 3 | |
| Output Voltage Swing from Rail | 25 | 50 | mV | RL = 10kΩ | 3 | ||
| Output Voltage Swing from Rail over temperature | 50 | mV | Over Temperature, G > 10 | 3 | |||
| Short-Circuit Current | ISC | -32 | 48 | mA | 3 | ||
| Specified Voltage Range | 2.7 | 5.5 | V | 3 | |||
| Operating Voltage Range | 2.5 | 5.5 | V | 3 | |||
| Quiescent Current per Channel | IQ | 415 | 490 | µA | VSD > 2.5 | 3 | |
| Quiescent Current per Channel over temperature | IQ | 600 | µA | Over Temperature | 3 | ||
| Shutdown Quiescent Current per Channel | ISD | 0.01 | 1 | µA | VSD < 0.8 | 3 | |
| Specified/Operating Temperature Range | -55 | 125 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Thermal Resistance, junction to ambient | θJA | 150 | °C/W | MSOP-8, TSSOP-14 surface mount | 3 | ||
| Supply Voltage, V+ to V– | 7.5 | V | 2 | ||||
| Signal Input Terminals Voltage | -0.5 | 0.5 | V | Referenced to (V–) and (V+) supply rails | 2 | ||
| Signal Input Terminals Current | 10 | mA | Signal input terminals | 2 | |||
| Operating Temperature | -55 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature | 300 | °C | Soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
INA331AIDGKT - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ina331aidgkt-etched.step/ina331aidgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina331aidgkt.step/ina331aidgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
b563b3023a3cb8c8, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).