← Commit history

Initial commit: component/ina331aidgkt

Ray ·c39e20dbb1 ·
2 files changed +200
README.mdadded+44
@@ -0,0 +1,44 @@+# INA331AIDGKT++**Texas Instruments** · Instrumentation Amplifiers · VSSOP-8++INA331AIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RG | passive | Gain-setting resistor terminal; connect external resistors between this pin and V- to set gain G = 5 + 5(R2/R1) for gains greater than 5V/V. |+| 2 | VIN- | power_in | Negative differential input signal terminal; common-mode range 0.55V to 3.8V at 5V supply; input impedance 10¹³Ω || 3pF. |+| 3 | VIN+ | power_in | Positive differential input signal terminal; common-mode range 0.55V to 3.8V at 5V supply; input impedance 10¹³Ω || 3pF. |+| 4 | V- | power_in | Negative power supply pin (ground in single-supply or negative rail in dual-supply mode); maximum supply voltage V+ to V- of 7.5V. |+| 5 | REF | input | Reference voltage input defining zero output level; requires low-impedance source ≤160Ω to preserve CMRR ≥80dB. |+| 6 | VOUT | output | Amplified differential output signal; swings within 50mV of supply rails for gains ≥10 with 10kΩ load; slew rate 5V/µs typical. |+| 7 | V+ | power_in | Positive power supply input; specified operating range +2.7V to +5.5V with quiescent current 415µA to 490µA. |+| 8 | Shutdown | input | Shutdown control input; pull below 0.8V to enter sleep mode drawing <2µA; float or tie to V+ for normal operation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8 |+| Category | Amplifiers/Comparators |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `INA331AIDGKT`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `ina331aidgkt-etched.step` / `ina331aidgkt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina331aidgkt.step` / `ina331aidgkt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina331) (24 pp, sha256 `b563b3023a3cb8c8`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina331aidgkt-datasheet.pdf)
page.jsonadded+156
@@ -0,0 +1,156 @@+{+  "slug": "ina331aidgkt",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Instrumentation Amplifiers, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "amplifiers-comparators",+    "ina331aidgkt",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ina331aidgkt.kicad_sym",+    "ina331aidgkt.kicad_mod",+    "ina331aidgkt.glb",+    "ina331aidgkt.step",+    "ina331aidgkt.lbr",+    "docs/hero.png",+    "docs/ina331aidgkt-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "INA331AIDGKT",+    "manufacturer": "Texas Instruments",+    "package": "VSSOP-8",+    "pin_count": 8,+    "category": "Amplifiers/Comparators",+    "subcategory": "Instrumentation Amplifiers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ina331",+    "parts": {+      "symbol": "ina331aidgkt.kicad_sym",+      "footprint": "ina331aidgkt.kicad_mod",+      "model_3d": "ina331aidgkt-etched.glb",+      "model_3d_plain": "ina331aidgkt.glb",+      "model_3d_step": "ina331aidgkt-etched.step",+      "model_3d_step_plain": "ina331aidgkt.step",+      "lbr": "ina331aidgkt.lbr"+    },+    "distributor_links": {+      "lcsc": "C2057310",+      "digikey": "296-12202-2-ND",+      "mouser": "595-INA331AIDGKT"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T18:59:32Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-12202-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-INA331AIDGKT",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "RG",+        "type": "passive",+        "description": "Gain-setting resistor terminal; connect external resistors between this pin and V- to set gain G = 5 + 5(R2/R1) for gains greater than 5V/V."+      },+      {+        "number": "2",+        "name": "VIN–",+        "type": "power_in",+        "description": "Negative differential input signal terminal; common-mode range 0.55V to 3.8V at 5V supply; input impedance 10¹³Ω || 3pF."+      },+      {+        "number": "3",+        "name": "VIN+",+        "type": "power_in",+        "description": "Positive differential input signal terminal; common-mode range 0.55V to 3.8V at 5V supply; input impedance 10¹³Ω || 3pF."+      },+      {+        "number": "4",+        "name": "V–",+        "type": "power_in",+        "description": "Negative power supply pin (ground in single-supply or negative rail in dual-supply mode); maximum supply voltage V+ to V- of 7.5V."+      },+      {+        "number": "5",+        "name": "REF",+        "type": "input",+        "description": "Reference voltage input defining zero output level; requires low-impedance source ≤160Ω to preserve CMRR ≥80dB."+      },+      {+        "number": "6",+        "name": "VOUT",+        "type": "output",+        "description": "Amplified differential output signal; swings within 50mV of supply rails for gains ≥10 with 10kΩ load; slew rate 5V/µs typical."+      },+      {+        "number": "7",+        "name": "V+",+        "type": "power_in",+        "description": "Positive power supply input; specified operating range +2.7V to +5.5V with quiescent current 415µA to 490µA."+      },+      {+        "number": "8",+        "name": "Shutdown",+        "type": "input",+        "description": "Shutdown control input; pull below 0.8V to enter sleep mode drawing <2µA; float or tie to V+ for normal operation."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 24,+        "cost_usd": 0.2426,+        "at": "2026-09-26T18:59:16"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ina331",+        "pages": 24,+        "sha256": "b563b3023a3cb8c8",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file