main
Ray
Publish 0.1.0
72b4723
INA310A1QDGKRQ1
Texas Instruments · IC · VSSOP-8
INA310A1QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Power supply input, operating supply range 2.7 V to 20 V. |
| 2 | OUT | output | Output voltage of the current-sense amplifier. |
| 3 | CMPIN | input | Comparator analog input. |
| 4 | GND | power_in | Ground reference pin. |
| 5 | RESET | input | Comparator reset pin, active low: Low selects transparent mode and High selects latch mode. |
| 6 | CMPOUT | output | Open-drain comparator output that latches high when RESET is High. |
| 7 | IN- | input | Shunt resistor negative sense input; connect to load side of the sense resistor for high-side applications and to ground side for low-side applications. |
| 8 | IN+ | input | Shunt resistor positive sense input; connect to bus-voltage side of the sense resistor for high-side applications and to load side for low-side applications. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -4 | 110 | V | TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio | CMRR | 140 | 160 | dB | INA310Ax-Q1, VIN+ = -4 V to 110 V, TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio at 50 kHz | CMRR | 85 | dB | INA310Ax-Q1, f = 50 kHz | 5 | ||
| Offset voltage, RTI (INA310A1-Q1) | VOS | -150 | 30 | 150 | µV | 5 | |
| Offset drift, RTI (INA310A1-Q1) | dVOS/dT | -0.5 | 0.05 | 0.5 | µV/°C | TA = -40°C to +125°C, INA310A1-Q1, INA310A2-Q1, INA310A3-Q1 | 5 |
| Power-supply rejection ratio, RTI (INA310A1-Q1) | PSRR | -8 | 1 | 8 | µV/V | INA310A1-Q1, 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C | 5 |
| Input bias current | IB | 10 | 20 | 30 | µA | IB+, IB-, VSENSE = 0 mV | 5 |
| Gain error (INA310Ax-Q1) | GERR | -0.15 | 0.02 | 0.15 | % | INA310Ax-Q1, GND + 50 mV ≤ VOUT ≤ VS, 200 mV | 5 |
| Gain error drift (INA310Ax-Q1) | GERR | 1 | 10 | ppm/°C | INA310Ax-Q1, TA = -40°C to +125°C | 5 | |
| Nonlinearity error | NLERR | -0.01 | 0.01 | % | GND + 50 mV ≤ VOUT ≤ VS, 200 mV | 5 | |
| Maximum capacitive load | 500 | pF | No sustained oscillation, no isolation resistor | 5 | |||
| Swing to VS (power-supply rail) | VSP | -70 | -150 | mV | Printed as (VS), x mV; RLOAD = 10 kΩ to GND, TA = -40°C to +125°C | 5 | |
| Swing to GND | VSN | 5 | 20 | mV | Printed as (GND) + x mV; RLOAD = 10 kΩ to GND, TA = -40°C to +125°C, VSENSE = 0 mV | 5 | |
| Gain (INA310A1-Q1) | G | 20 | V/V | 5 | |||
| Bandwidth (INA310A1-Q1) | BW | 1300 | kHz | CLOAD = 5 pF, VSENSE = 200 mV | 6 | ||
| Slew rate | SR | 2.5 | V/µs | Rising edge | 6 | ||
| Settling time to 0.5% | tS | 10 | µs | VOUT = 4 V ± 0.1 V step, output settles to 0.5% | 6 | ||
| Settling time to 1% | tS | 5 | µs | VOUT = 4 V ± 0.1 V step, output settles to 1% | 6 | ||
| Settling time to 5% | tS | 1 | µs | VOUT = 4 V ± 0.1 V step, output settles to 5% | 6 | ||
| Voltage noise density | Ven | 50 | nV/√Hz | 6 | |||
| Alert threshold | VTHRESHOLD | 585 | 600 | 615 | mV | TA = 25°C | 6 |
| Alert threshold | VTHRESHOLD | 580 | 620 | mV | TA = -40°C to +125°C | 6 | |
| Comparator hysteresis | 8 | mV | TA = 25°C | 6 | |||
| Small-signal propagation delay | tP | 1 | µs | Comparator input overdrive = 20 mV | 6 | ||
| Slew-rate-limited propagation delay | tP | 1.6 | µs | VOUT step = 0.5 V to 4.5 V, VLIMIT = 4 V | 6 | ||
| Input bias current, CMPIN pin | IBCMPIN | -20 | 1 | 20 | nA | TA = 25°C, VCMPIN = 0.4 V to 1.2 V | 6 |
| Input bias current, CMPIN pin | IBCMPIN | 250 | nA | TA = -40°C to +125°C, VCMPIN = 0.4 V to 1.2 V | 6 | ||
| High-level leakage current | ILKG | 1 | µA | VCMPout = VS | 6 | ||
| Low-level output voltage | VOL | 300 | mV | IOL = 2.35 mA | 6 | ||
| Low-level output voltage | VOL | 350 | mV | TA = -40°C to +125°C, IOL = 2.35 mA | 6 | ||
| RESET high-level input voltage threshold | VIH | 1.2 | V | TA = -40°C to +125°C | 6 | ||
| RESET low-level input voltage threshold | VIL | 0.4 | V | TA = -40°C to +125°C | 6 | ||
| Minimum RESET pulse width | 100 | 200 | ns | TA = -40°C to +125°C | 6 | ||
| RESET propagation delay | 250 | ns | 6 | ||||
| Supply voltage range (INA310A1-Q1) | VS | 2.7 | 20 | V | TA = -40°C to +125°C | 6 | |
| Quiescent current | IQ | 1.6 | 2 | mA | 6 | ||
| Quiescent current | IQ | 2.25 | mA | TA = -40°C to +125°C | 6 | ||
| Common-mode input range | VCM | -4 | 48 | 110 | V | 4 | |
| Operating supply voltage | VS | 2.7 | 5 | 20 | V | 4 | |
| Differential sense input range | VSENSE | 0 | V | Upper limit printed as VS / G | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Supply voltage | VS | -0.3 | 22 | V | 4 | ||
| Analog inputs differential (VIN+), (VIN-) | VIN+, VIN- | -12 | 12 | V | 4 | ||
| Analog inputs with respect to GND | VIN+, VIN- | -20 | 120 | V | 4 | ||
| Analog output | VOUT | -0.3 | V | Lower limit GND, 0.3; upper limit (VS) + 0.3 V | 4 | ||
| Comparator reset pin | -0.3 | V | Lower limit GND, 0.3; upper limit (VS) + 0.3 V | 4 | |||
| Comparator analog input | -0.3 | V | Lower limit GND, 0.3; upper limit MIN of 5.5 or VS | 4 | |||
| Comparator output | -0.3 | 22 | V | Lower limit GND, 0.3 | 4 | ||
| Input current into any pin | 5 | mA | 4 | ||||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | -65 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DGK VSSOP-8) | RθJA | 172.2 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DGK VSSOP-8) | RθJC(top) | 63.5 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DGK VSSOP-8) | RθJB | 93.8 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DGK VSSOP-8) | ΨJT | 9.8 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DGK VSSOP-8) | ΨJB | 92.2 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
INA310A1QDGKRQ1 - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina310a1qdgkrq1-etched.step/ina310a1qdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina310a1qdgkrq1.step/ina310a1qdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
cf90218870149e72, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# INA310A1QDGKRQ1
**Texas Instruments** · IC · VSSOP-8
INA310A1QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Power supply input, operating supply range 2.7 V to 20 V. |
| 2 | OUT | output | Output voltage of the current-sense amplifier. |
| 3 | CMPIN | input | Comparator analog input. |
| 4 | GND | power_in | Ground reference pin. |
| 5 | RESET | input | Comparator reset pin, active low: Low selects transparent mode and High selects latch mode. |
| 6 | CMPOUT | output | Open-drain comparator output that latches high when RESET is High. |
| 7 | IN- | input | Shunt resistor negative sense input; connect to load side of the sense resistor for high-side applications and to ground side for low-side applications. |
| 8 | IN+ | input | Shunt resistor positive sense input; connect to bus-voltage side of the sense resistor for high-side applications and to load side for low-side applications. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -4 | | 110 | V | TA = -40°C to +125°C | 5 |
| Common-mode rejection ratio | CMRR | 140 | 160 | | dB | INA310Ax-Q1, VIN+ = -4 V to 110 V, TA = -40°C to +125°C | 5 |
| Common-mode rejection ratio at 50 kHz | CMRR | 85 | | | dB | INA310Ax-Q1, f = 50 kHz | 5 |
| Offset voltage, RTI (INA310A1-Q1) | VOS | -150 | 30 | 150 | µV | | 5 |
| Offset drift, RTI (INA310A1-Q1) | dVOS/dT | -0.5 | 0.05 | 0.5 | µV/°C | TA = -40°C to +125°C, INA310A1-Q1, INA310A2-Q1, INA310A3-Q1 | 5 |
| Power-supply rejection ratio, RTI (INA310A1-Q1) | PSRR | -8 | 1 | 8 | µV/V | INA310A1-Q1, 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C | 5 |
| Input bias current | IB | 10 | 20 | 30 | µA | IB+, IB-, VSENSE = 0 mV | 5 |
| Gain error (INA310Ax-Q1) | GERR | -0.15 | 0.02 | 0.15 | % | INA310Ax-Q1, GND + 50 mV ≤ VOUT ≤ VS, 200 mV | 5 |
| Gain error drift (INA310Ax-Q1) | GERR | | 1 | 10 | ppm/°C | INA310Ax-Q1, TA = -40°C to +125°C | 5 |
| Nonlinearity error | NLERR | -0.01 | | 0.01 | % | GND + 50 mV ≤ VOUT ≤ VS, 200 mV | 5 |
| Maximum capacitive load | | | | 500 | pF | No sustained oscillation, no isolation resistor | 5 |
| Swing to VS (power-supply rail) | VSP | | -70 | -150 | mV | Printed as (VS), x mV; RLOAD = 10 kΩ to GND, TA = -40°C to +125°C | 5 |
| Swing to GND | VSN | | 5 | 20 | mV | Printed as (GND) + x mV; RLOAD = 10 kΩ to GND, TA = -40°C to +125°C, VSENSE = 0 mV | 5 |
| Gain (INA310A1-Q1) | G | | 20 | | V/V | | 5 |
| Bandwidth (INA310A1-Q1) | BW | | 1300 | | kHz | CLOAD = 5 pF, VSENSE = 200 mV | 6 |
| Slew rate | SR | | 2.5 | | V/µs | Rising edge | 6 |
| Settling time to 0.5% | tS | | 10 | | µs | VOUT = 4 V ± 0.1 V step, output settles to 0.5% | 6 |
| Settling time to 1% | tS | | 5 | | µs | VOUT = 4 V ± 0.1 V step, output settles to 1% | 6 |
| Settling time to 5% | tS | | 1 | | µs | VOUT = 4 V ± 0.1 V step, output settles to 5% | 6 |
| Voltage noise density | Ven | | 50 | | nV/√Hz | | 6 |
| Alert threshold | VTHRESHOLD | 585 | 600 | 615 | mV | TA = 25°C | 6 |
| Alert threshold | VTHRESHOLD | 580 | | 620 | mV | TA = -40°C to +125°C | 6 |
| Comparator hysteresis | | | 8 | | mV | TA = 25°C | 6 |
| Small-signal propagation delay | tP | | 1 | | µs | Comparator input overdrive = 20 mV | 6 |
| Slew-rate-limited propagation delay | tP | | 1.6 | | µs | VOUT step = 0.5 V to 4.5 V, VLIMIT = 4 V | 6 |
| Input bias current, CMPIN pin | IBCMPIN | -20 | 1 | 20 | nA | TA = 25°C, VCMPIN = 0.4 V to 1.2 V | 6 |
| Input bias current, CMPIN pin | IBCMPIN | | | 250 | nA | TA = -40°C to +125°C, VCMPIN = 0.4 V to 1.2 V | 6 |
| High-level leakage current | ILKG | | | 1 | µA | VCMPout = VS | 6 |
| Low-level output voltage | VOL | | | 300 | mV | IOL = 2.35 mA | 6 |
| Low-level output voltage | VOL | | | 350 | mV | TA = -40°C to +125°C, IOL = 2.35 mA | 6 |
| RESET high-level input voltage threshold | VIH | 1.2 | | | V | TA = -40°C to +125°C | 6 |
| RESET low-level input voltage threshold | VIL | | | 0.4 | V | TA = -40°C to +125°C | 6 |
| Minimum RESET pulse width | | 100 | | 200 | ns | TA = -40°C to +125°C | 6 |
| RESET propagation delay | | | 250 | | ns | | 6 |
| Supply voltage range (INA310A1-Q1) | VS | 2.7 | | 20 | V | TA = -40°C to +125°C | 6 |
| Quiescent current | IQ | | 1.6 | 2 | mA | | 6 |
| Quiescent current | IQ | | | 2.25 | mA | TA = -40°C to +125°C | 6 |
| Common-mode input range | VCM | -4 | 48 | 110 | V | | 4 |
| Operating supply voltage | VS | 2.7 | 5 | 20 | V | | 4 |
| Differential sense input range | VSENSE | 0 | | | V | Upper limit printed as VS / G | 4 |
| Operating free-air temperature | TA | -40 | | 125 | °C | | 4 |
| Supply voltage | VS | -0.3 | | 22 | V | | 4 |
| Analog inputs differential (VIN+), (VIN-) | VIN+, VIN- | -12 | | 12 | V | | 4 |
| Analog inputs with respect to GND | VIN+, VIN- | -20 | | 120 | V | | 4 |
| Analog output | VOUT | -0.3 | | | V | Lower limit GND, 0.3; upper limit (VS) + 0.3 V | 4 |
| Comparator reset pin | | -0.3 | | | V | Lower limit GND, 0.3; upper limit (VS) + 0.3 V | 4 |
| Comparator analog input | | -0.3 | | | V | Lower limit GND, 0.3; upper limit MIN of 5.5 or VS | 4 |
| Comparator output | | -0.3 | | 22 | V | Lower limit GND, 0.3 | 4 |
| Input current into any pin | | | | 5 | mA | | 4 |
| Operating temperature | TA | -55 | | 150 | °C | | 4 |
| Junction temperature | TJ | -65 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance (DGK VSSOP-8) | RθJA | | 172.2 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance (DGK VSSOP-8) | RθJC(top) | | 63.5 | | °C/W | | 4 |
| Junction-to-board thermal resistance (DGK VSSOP-8) | RθJB | | 93.8 | | °C/W | | 4 |
| Junction-to-top characterization parameter (DGK VSSOP-8) | ΨJT | | 9.8 | | °C/W | | 4 |
| Junction-to-board characterization parameter (DGK VSSOP-8) | ΨJB | | 92.2 | | °C/W | | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `INA310A1QDGKRQ1`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ina310a1qdgkrq1-etched.step` / `ina310a1qdgkrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina310a1qdgkrq1.step` / `ina310a1qdgkrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina310a-q1.pdf) (35 pp, sha256 `cf90218870149e72`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/ina310a1qdgkrq1-datasheet.pdf)