main
Ray Publish 0.1.0 31c3c3c

INA296A5QDDFRQ1

TEXAS INSTRUMENTS · Global Sourcing Parts · SOT-23-8

INA296A5QDDFRQ1 from TEXAS INSTRUMENTS, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN- input Current-sense amplifier negative input; for high-side applications connect to load side of sense resistor, for low-side applications connect to ground side of sense resistor.
2 GND power_in Ground.
3 REF2 input Reference 2 voltage input; connect to a voltage potential from 0V to VS.
4 NC unconnected Reserved; connect to ground.
5 OUT output Output voltage.
6 VS power_in Power supply, 2.7V to 20V.
7 REF1 input Reference 1 voltage input; connect to a voltage potential from 0V to VS.
8 IN+ input Current-sense amplifier positive input; for high-side applications connect to bus-voltage side of sense resistor, for low-side applications connect to load side of sense resistor.

Key specifications

Parameter Value
Manufacturer TEXAS INSTRUMENTS
Package SOT-23-8
Category Global Sourcing Parts
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 22 V 4
Differential analog input VIN+ − VIN- -30 30 V Differential (VIN+) − (VIN-) 4
Common-mode analog input VIN+, VIN- -20 120 V Common-mode 4
Output -0.3 0.3 V GND, 0.3 to Vs + 0.3 (printed relative to GND/VS) 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V Human body model, AEC Q100-002 4
ESD CDM V(ESD) -1000 1000 V Charged device model, AEC Q100-011 4
Common-mode input range VCM -5 48 110 V 4
Operating supply range VS 2.7 5 20 V 4
Ambient temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 129.7 °C/W DDF (SOT23) 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 58 °C/W DDF (SOT23) 8 pins 4
Junction-to-board thermal resistance RθJB 52.6 °C/W DDF (SOT23) 8 pins 4
Junction-to-top characterization parameter ΨJT 2.3 °C/W DDF (SOT23) 8 pins 4
Junction-to-board characterization parameter ΨJB 52.3 °C/W DDF (SOT23) 8 pins 5
Common-mode input range VCM -5 110 V VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C 5
Common-mode rejection ratio, input-referred CMRR 150 166 dB VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C, INA296A-Q1 5
Common-mode rejection ratio, input-referred CMRR 105 dB f = 50kHz 5
Offset voltage, input-referred Vos -8 2 8 µV VSENSE = 0mV, INA296A5-Q1 (typ ±2, max ±8) 5
Offset voltage drift, input-referred dVos/dT -100 20 100 nV/°C TA = -40°C to 125°C, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 (typ ±20, max ±100) 5
Power-supply rejection ratio, input-referred PSRR -0.5 0.06 0.5 µV/V VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296A3/A4/A5-Q1 (typ ±0.06, max ±0.5) 5
Input bias current IB 25 35 45 µA IB+, IB-, VSENSE=0mV 5
Reference input range 0 5 V 0 to VS 5
Gain G 200 V/V A5, B5 Devices 6
Gain error GERR -0.015 0.003 0.015 % (GND + 50mV) < VOUT < (VS - 200mV), INA296A4-Q1, INA296A5-Q1 (typ ±0.003, max ±0.015) 6
Gain error drift -2 0.1 2 ppm/°C TA = -40°C to +125°C, INA296A4-Q1, INA296A5-Q1 (typ ±0.1, max ±2) 6
Non-Linearity Error 0.001 % 6
Maximum Capacitive Load 1 nF No sustained oscillations, No isolation resistor 6
Swing to VS power supply rail -0.07 -0.2 V RL = 10kΩ to GND, TA = -40°C to +125°C; printed VS − 0.07 typ, VS − 0.2 max 6
Swing to ground 8 20 mV RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C 6
Reference voltage rejection ratio, input-referred RVRR -1.5 0.5 1.5 µV/V VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296A2/A3/A4/A5-Q1 (typ ±0.5, max ±1.5) 6
Reference divider accuracy -0.01 0.002 0.01 % VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE =0mV, VREF1 = VS, VREF2 = GND or VREF1 = GND, VREF2 = VS, TA = -40°C to +125°C, INA296A3/A4/A5-Q1 (typ ±0.002, max ±0.01) 7
Bandwidth BW 1.1 MHz All Gains, −3dB Bandwidth 7
Settling time to 0.5% 1.5 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 0.5% 7
Settling time to 1% 1 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 1% 7
Settling time to 5% 0.5 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 5% 7
Slew rate SR 8 V/µs Rising 7
Voltage noise density 28 nV/√Hz A5, B5 Devices 7
Supply voltage VS 2.7 20 V 7
Quiescent current IQ 2.5 3 mA VSENSE = 0mV 7
Quiescent current IQ 3.2 mA VSENSE = 0mV, TA = -40°C to +125°C 7
Specified temperature range TA -40 125 °C 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: INA296A5QDDFRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina296a5qddfrq1-etched.step / ina296a5qddfrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina296a5qddfrq1.step / ina296a5qddfrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TEXAS INSTRUMENTS datasheet (49 pp, sha256 3de69b935de5298b, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF