Generated by kicad-footprint-generator · KiCad file format 20260206
INA296A5QDDFRQ1
TEXAS INSTRUMENTS · Global Sourcing Parts · SOT-23-8
INA296A5QDDFRQ1 from TEXAS INSTRUMENTS, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side applications connect to load side of sense resistor, for low-side applications connect to ground side of sense resistor. |
| 2 | GND | power_in | Ground. |
| 3 | REF2 | input | Reference 2 voltage input; connect to a voltage potential from 0V to VS. |
| 4 | NC | unconnected | Reserved; connect to ground. |
| 5 | OUT | output | Output voltage. |
| 6 | VS | power_in | Power supply, 2.7V to 20V. |
| 7 | REF1 | input | Reference 1 voltage input; connect to a voltage potential from 0V to VS. |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side applications connect to bus-voltage side of sense resistor, for low-side applications connect to load side of sense resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TEXAS INSTRUMENTS |
| Package | SOT-23-8 |
| Category | Global Sourcing Parts |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 22 | V | 4 | |||
| Differential analog input | VIN+ − VIN- | -30 | 30 | V | Differential (VIN+) − (VIN-) | 4 | |
| Common-mode analog input | VIN+, VIN- | -20 | 120 | V | Common-mode | 4 | |
| Output | -0.3 | 0.3 | V | GND, 0.3 to Vs + 0.3 (printed relative to GND/VS) | 4 | ||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model, AEC Q100-002 | 4 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | Charged device model, AEC Q100-011 | 4 | |
| Common-mode input range | VCM | -5 | 48 | 110 | V | 4 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 4 | |
| Ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 129.7 | °C/W | DDF (SOT23) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 58 | °C/W | DDF (SOT23) 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 52.6 | °C/W | DDF (SOT23) 8 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 2.3 | °C/W | DDF (SOT23) 8 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 52.3 | °C/W | DDF (SOT23) 8 pins | 5 | ||
| Common-mode input range | VCM | -5 | 110 | V | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Common-mode rejection ratio, input-referred | CMRR | 150 | 166 | dB | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C, INA296A-Q1 | 5 | |
| Common-mode rejection ratio, input-referred | CMRR | 105 | dB | f = 50kHz | 5 | ||
| Offset voltage, input-referred | Vos | -8 | 2 | 8 | µV | VSENSE = 0mV, INA296A5-Q1 (typ ±2, max ±8) | 5 |
| Offset voltage drift, input-referred | dVos/dT | -100 | 20 | 100 | nV/°C | TA = -40°C to 125°C, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 (typ ±20, max ±100) | 5 |
| Power-supply rejection ratio, input-referred | PSRR | -0.5 | 0.06 | 0.5 | µV/V | VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296A3/A4/A5-Q1 (typ ±0.06, max ±0.5) | 5 |
| Input bias current | IB | 25 | 35 | 45 | µA | IB+, IB-, VSENSE=0mV | 5 |
| Reference input range | 0 | 5 | V | 0 to VS | 5 | ||
| Gain | G | 200 | V/V | A5, B5 Devices | 6 | ||
| Gain error | GERR | -0.015 | 0.003 | 0.015 | % | (GND + 50mV) < VOUT < (VS - 200mV), INA296A4-Q1, INA296A5-Q1 (typ ±0.003, max ±0.015) | 6 |
| Gain error drift | -2 | 0.1 | 2 | ppm/°C | TA = -40°C to +125°C, INA296A4-Q1, INA296A5-Q1 (typ ±0.1, max ±2) | 6 | |
| Non-Linearity Error | 0.001 | % | 6 | ||||
| Maximum Capacitive Load | 1 | nF | No sustained oscillations, No isolation resistor | 6 | |||
| Swing to VS power supply rail | -0.07 | -0.2 | V | RL = 10kΩ to GND, TA = -40°C to +125°C; printed VS − 0.07 typ, VS − 0.2 max | 6 | ||
| Swing to ground | 8 | 20 | mV | RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C | 6 | ||
| Reference voltage rejection ratio, input-referred | RVRR | -1.5 | 0.5 | 1.5 | µV/V | VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296A2/A3/A4/A5-Q1 (typ ±0.5, max ±1.5) | 6 |
| Reference divider accuracy | -0.01 | 0.002 | 0.01 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE =0mV, VREF1 = VS, VREF2 = GND or VREF1 = GND, VREF2 = VS, TA = -40°C to +125°C, INA296A3/A4/A5-Q1 (typ ±0.002, max ±0.01) | 7 | |
| Bandwidth | BW | 1.1 | MHz | All Gains, −3dB Bandwidth | 7 | ||
| Settling time to 0.5% | 1.5 | µs | VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 0.5% | 7 | |||
| Settling time to 1% | 1 | µs | VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 1% | 7 | |||
| Settling time to 5% | 0.5 | µs | VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 5% | 7 | |||
| Slew rate | SR | 8 | V/µs | Rising | 7 | ||
| Voltage noise density | 28 | nV/√Hz | A5, B5 Devices | 7 | |||
| Supply voltage | VS | 2.7 | 20 | V | 7 | ||
| Quiescent current | IQ | 2.5 | 3 | mA | VSENSE = 0mV | 7 | |
| Quiescent current | IQ | 3.2 | mA | VSENSE = 0mV, TA = -40°C to +125°C | 7 | ||
| Specified temperature range | TA | -40 | 125 | °C | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
INA296A5QDDFRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: SOT-23-8, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina296a5qddfrq1-etched.step/ina296a5qddfrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina296a5qddfrq1.step/ina296a5qddfrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TEXAS INSTRUMENTS datasheet (49 pp, sha256
3de69b935de5298b, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).