main
Ray
Publish 0.1.0
f8dfe35
INA296A4IDGKR
Texas Instruments · Current Sense Amplifiers · VSSOP-8
INA296A4IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side use connect to the load side of the sense resistor, and for low-side use connect to the ground side. |
| 2 | GND | power_in | Ground connection for the device. |
| 3 | REF2 | input | Reference 2 voltage input; connect to a potential from 0V to VS (see Adjusting the Output With the Reference Pins). |
| 4 | NC | unconnected | Reserved; connect to ground. |
| 5 | OUT | output | Output voltage of the current-sense amplifier. |
| 6 | VS | power_in | Power supply, 2.7V to 20V. |
| 7 | REF1 | input | Reference 1 voltage input; connect to a potential from 0V to VS (see Adjusting the Output With the Reference Pins). |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side use connect to the bus-voltage side of the sense resistor, and for low-side use connect to the load side. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 22 | V | 4 | |||
| Analog inputs differential | (VIN+) − (VIN-) | -30 | 30 | V | 4 | ||
| Analog inputs common-mode | VIN+, VIN- | -20 | 120 | V | 4 | ||
| REF1, REF2, NC inputs | -0.3 | V | min = GND − 0.3 V; max = VS + 0.3 V (max not numeric) | 4 | |||
| Output | -0.3 | V | min = GND − 0.3 V; max = VS + 0.3 V (max not numeric) | 4 | |||
| Operating temperature TA | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range | VCM | -5 | 48 | 110 | V | 4 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 4 | |
| Ambient temperature | TA | -40 | 125 | 125 | °C | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 167.2 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 58.9 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 88.9 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 8.1 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 87.4 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Common-mode input range | VCM | -5 | 110 | V | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Common-mode rejection ratio, input-referred (INA296A) | CMRR | 150 | 166 | dB | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Offset voltage, input-referred (INA296A4) | Vos | -10 | 3 | 10 | µV | VSENSE = 0mV, INA296A3, INA296A4 | 5 |
| Offset voltage drift, input-referred (INA296A4) | dVos/dT | -100 | 20 | 100 | nV/°C | TA = -40°C to 125°C, INA296A3, INA296A4, INA296A5 | 5 |
| Power-supply rejection ratio, input-referred (INA296A4) | PSRR | -0.5 | 0.06 | 0.5 | µV/V | VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296A3, INA296A4, INA296A5 | 5 |
| Input bias current | IB | 25 | 35 | 45 | µA | IB+, IB-, VSENSE=0mV | 5 |
| Reference input range | 0 | V | lower limit 0 V; upper limit printed as VS (not numeric) | 5 | |||
| Gain (A4 device) | G | 100 | V/V | A4, B4 devices | 5 | ||
| Gain error (INA296A4) | GERR | -0.015 | 0.003 | 0.015 | % | (GND + 50mV) < VOUT < (VS - 200mV), INA296A4, INA296A5 | 6 |
| Gain error drift (INA296A4) | -2 | 0.1 | 2 | ppm/°C | TA = -40°C to +125°C, INA296A4, INA296A5 | 6 | |
| Non-linearity error | -0.001 | 0.001 | % | 6 | |||
| Maximum capacitive load | 1 | nF | No sustained oscillations, no isolation resistor | 6 | |||
| Swing to ground | 8 | 20 | mV | RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C | 6 | ||
| Reference voltage rejection ratio, input-referred (INA296A4) | RVRR | -1.5 | 0.5 | 1.5 | µV/V | VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296A2, INA296A3, INA296A4, INA296A5 | 6 |
| Reference divider accuracy (INA296A4) | -0.01 | 0.002 | 0.01 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND; VREF1 = GND, VREF2 = VS; TA = -40°C to +125°C, INA296A3, INA296A4, INA296A5 | 6 | |
| Supply voltage | VS | 2.7 | 20 | V | 7 | ||
| Quiescent current | IQ | 2.5 | 3 | mA | VSENSE = 0mV | 7 | |
| Quiescent current over temperature | IQ | 3.2 | mA | VSENSE = 0mV, TA = -40°C to +125°C | 7 |
CAD (KiCad official)
- Symbol:
INA296A4IDGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina296a4idgkr-etched.step/ina296a4idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina296a4idgkr.step/ina296a4idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
a811e78481cbe850, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA296A4IDGKR
**Texas Instruments** · Current Sense Amplifiers · VSSOP-8
INA296A4IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side use connect to the load side of the sense resistor, and for low-side use connect to the ground side. |
| 2 | GND | power_in | Ground connection for the device. |
| 3 | REF2 | input | Reference 2 voltage input; connect to a potential from 0V to VS (see Adjusting the Output With the Reference Pins). |
| 4 | NC | unconnected | Reserved; connect to ground. |
| 5 | OUT | output | Output voltage of the current-sense amplifier. |
| 6 | VS | power_in | Power supply, 2.7V to 20V. |
| 7 | REF1 | input | Reference 1 voltage input; connect to a potential from 0V to VS (see Adjusting the Output With the Reference Pins). |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side use connect to the bus-voltage side of the sense resistor, and for low-side use connect to the load side. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | | | 22 | V | | 4 |
| Analog inputs differential | (VIN+) − (VIN-) | -30 | | 30 | V | | 4 |
| Analog inputs common-mode | VIN+, VIN- | -20 | | 120 | V | | 4 |
| REF1, REF2, NC inputs | | -0.3 | | | V | min = GND − 0.3 V; max = VS + 0.3 V (max not numeric) | 4 |
| Output | | -0.3 | | | V | min = GND − 0.3 V; max = VS + 0.3 V (max not numeric) | 4 |
| Operating temperature TA | TA | -55 | | 150 | °C | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Common-mode input range | VCM | -5 | 48 | 110 | V | | 4 |
| Operating supply range | VS | 2.7 | 5 | 20 | V | | 4 |
| Ambient temperature | TA | -40 | 125 | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 167.2 | | °C/W | DGK (VSSOP) 8-pin package | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 58.9 | | °C/W | DGK (VSSOP) 8-pin package | 4 |
| Junction-to-board thermal resistance | RθJB | | 88.9 | | °C/W | DGK (VSSOP) 8-pin package | 4 |
| Junction-to-top characterization parameter | ΨJT | | 8.1 | | °C/W | DGK (VSSOP) 8-pin package | 4 |
| Junction-to-board characterization parameter | ΨJB | | 87.4 | | °C/W | DGK (VSSOP) 8-pin package | 4 |
| Common-mode input range | VCM | -5 | | 110 | V | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 |
| Common-mode rejection ratio, input-referred (INA296A) | CMRR | 150 | 166 | | dB | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 |
| Offset voltage, input-referred (INA296A4) | Vos | -10 | 3 | 10 | µV | VSENSE = 0mV, INA296A3, INA296A4 | 5 |
| Offset voltage drift, input-referred (INA296A4) | dVos/dT | -100 | 20 | 100 | nV/°C | TA = -40°C to 125°C, INA296A3, INA296A4, INA296A5 | 5 |
| Power-supply rejection ratio, input-referred (INA296A4) | PSRR | -0.5 | 0.06 | 0.5 | µV/V | VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296A3, INA296A4, INA296A5 | 5 |
| Input bias current | IB | 25 | 35 | 45 | µA | IB+, IB-, VSENSE=0mV | 5 |
| Reference input range | | 0 | | | V | lower limit 0 V; upper limit printed as VS (not numeric) | 5 |
| Gain (A4 device) | G | | 100 | | V/V | A4, B4 devices | 5 |
| Gain error (INA296A4) | GERR | -0.015 | 0.003 | 0.015 | % | (GND + 50mV) < VOUT < (VS - 200mV), INA296A4, INA296A5 | 6 |
| Gain error drift (INA296A4) | | -2 | 0.1 | 2 | ppm/°C | TA = -40°C to +125°C, INA296A4, INA296A5 | 6 |
| Non-linearity error | | -0.001 | | 0.001 | % | | 6 |
| Maximum capacitive load | | | | 1 | nF | No sustained oscillations, no isolation resistor | 6 |
| Swing to ground | | | 8 | 20 | mV | RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C | 6 |
| Reference voltage rejection ratio, input-referred (INA296A4) | RVRR | -1.5 | 0.5 | 1.5 | µV/V | VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296A2, INA296A3, INA296A4, INA296A5 | 6 |
| Reference divider accuracy (INA296A4) | | -0.01 | 0.002 | 0.01 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND; VREF1 = GND, VREF2 = VS; TA = -40°C to +125°C, INA296A3, INA296A4, INA296A5 | 6 |
| Supply voltage | VS | 2.7 | | 20 | V | | 7 |
| Quiescent current | IQ | | 2.5 | 3 | mA | VSENSE = 0mV | 7 |
| Quiescent current over temperature | IQ | | | 3.2 | mA | VSENSE = 0mV, TA = -40°C to +125°C | 7 |
## CAD (KiCad official)
- Symbol: `INA296A4IDGKR`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ina296a4idgkr-etched.step` / `ina296a4idgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina296a4idgkr.step` / `ina296a4idgkr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina296a.pdf) (43 pp, sha256 `a811e78481cbe850`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina296a4idgkr-datasheet.pdf)