main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ina296a4idgkr: viewers rendered from the public page · Ray
ina296a4idgkr-etched.glb Publish 0.1.0 · Ray
ina296a4idgkr-etched.step ina296a4idgkr: factory component page (tier=mfr) · Ray
ina296a4idgkr-hero.glb ina296a4idgkr: hero GLB from the etched model (keeps the MPN mark) · Ray
ina296a4idgkr-hero.overlay.json Publish 0.1.0 · Ray
ina296a4idgkr.glb Publish 0.1.0 · Ray
ina296a4idgkr.kicad_mod Publish 0.1.0 · Ray
ina296a4idgkr.kicad_sym Publish 0.1.0 · Ray
ina296a4idgkr.lbr Publish 0.1.0 · Ray
ina296a4idgkr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

INA296A4IDGKR

Texas Instruments · Current Sense Amplifiers · VSSOP-8

INA296A4IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN- input Current-sense amplifier negative input; for high-side use connect to the load side of the sense resistor, and for low-side use connect to the ground side.
2 GND power_in Ground connection for the device.
3 REF2 input Reference 2 voltage input; connect to a potential from 0V to VS (see Adjusting the Output With the Reference Pins).
4 NC unconnected Reserved; connect to ground.
5 OUT output Output voltage of the current-sense amplifier.
6 VS power_in Power supply, 2.7V to 20V.
7 REF1 input Reference 1 voltage input; connect to a potential from 0V to VS (see Adjusting the Output With the Reference Pins).
8 IN+ input Current-sense amplifier positive input; for high-side use connect to the bus-voltage side of the sense resistor, and for low-side use connect to the load side.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 22 V 4
Analog inputs differential (VIN+) − (VIN-) -30 30 V 4
Analog inputs common-mode VIN+, VIN- -20 120 V 4
REF1, REF2, NC inputs -0.3 V min = GND − 0.3 V; max = VS + 0.3 V (max not numeric) 4
Output -0.3 V min = GND − 0.3 V; max = VS + 0.3 V (max not numeric) 4
Operating temperature TA TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input range VCM -5 48 110 V 4
Operating supply range VS 2.7 5 20 V 4
Ambient temperature TA -40 125 125 °C 4
Junction-to-ambient thermal resistance RθJA 167.2 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-case (top) thermal resistance RθJC(top) 58.9 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-board thermal resistance RθJB 88.9 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-top characterization parameter ΨJT 8.1 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-board characterization parameter ΨJB 87.4 °C/W DGK (VSSOP) 8-pin package 4
Common-mode input range VCM -5 110 V VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C 5
Common-mode rejection ratio, input-referred (INA296A) CMRR 150 166 dB VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C 5
Offset voltage, input-referred (INA296A4) Vos -10 3 10 µV VSENSE = 0mV, INA296A3, INA296A4 5
Offset voltage drift, input-referred (INA296A4) dVos/dT -100 20 100 nV/°C TA = -40°C to 125°C, INA296A3, INA296A4, INA296A5 5
Power-supply rejection ratio, input-referred (INA296A4) PSRR -0.5 0.06 0.5 µV/V VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296A3, INA296A4, INA296A5 5
Input bias current IB 25 35 45 µA IB+, IB-, VSENSE=0mV 5
Reference input range 0 V lower limit 0 V; upper limit printed as VS (not numeric) 5
Gain (A4 device) G 100 V/V A4, B4 devices 5
Gain error (INA296A4) GERR -0.015 0.003 0.015 % (GND + 50mV) < VOUT < (VS - 200mV), INA296A4, INA296A5 6
Gain error drift (INA296A4) -2 0.1 2 ppm/°C TA = -40°C to +125°C, INA296A4, INA296A5 6
Non-linearity error -0.001 0.001 % 6
Maximum capacitive load 1 nF No sustained oscillations, no isolation resistor 6
Swing to ground 8 20 mV RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C 6
Reference voltage rejection ratio, input-referred (INA296A4) RVRR -1.5 0.5 1.5 µV/V VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296A2, INA296A3, INA296A4, INA296A5 6
Reference divider accuracy (INA296A4) -0.01 0.002 0.01 % VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND; VREF1 = GND, VREF2 = VS; TA = -40°C to +125°C, INA296A3, INA296A4, INA296A5 6
Supply voltage VS 2.7 20 V 7
Quiescent current IQ 2.5 3 mA VSENSE = 0mV 7
Quiescent current over temperature IQ 3.2 mA VSENSE = 0mV, TA = -40°C to +125°C 7

CAD (KiCad official)

  • Symbol: INA296A4IDGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina296a4idgkr-etched.step / ina296a4idgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina296a4idgkr.step / ina296a4idgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 a811e78481cbe850, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF