main
Ray
Publish 0.1.0
53e91a3
INA270AIDR
Texas Instruments · Current Sense Amplifiers · SOIC-8
INA270AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Analog input; connect to the load side of the shunt resistor. |
| 2 | GND | power_in | Analog ground. |
| 3 | PRE OUT | output | Analog output of the preamp stage with 96 kΩ output impedance; connect to the input of the external filter whose output goes to BUF IN. |
| 4 | BUF IN | input | Analog input; connect to the output of the filter driven from PRE OUT. |
| 5 | OUT | output | Analog output voltage; the output swing is limited by the voltages on the V+ supply pin. |
| 6 | V+ | power_in | Power supply, +2.7 V to +18 V. |
| 7 | NC | unconnected | Not internally connected; the datasheet says to connect this pin to ground. |
| 8 | IN+ | input | Analog input; connect to the supply side of the shunt resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -16 | 80 | V | TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio | CMRR | 80 | 120 | dB | VIN+ = -16 V to +80 V | 5 | |
| CMRR over temperature | CMRR | 100 | 120 | dB | VIN+ = +12 V to +80 V, TA = -40°C to +125°C | 5 | |
| Offset voltage, RTI | VOS | 0.5 | 2.5 | mV | 5 | ||
| VOS over temperature | VOS | -3 | 3 | mV | TA = -40°C to +125°C | 5 | |
| VOS vs temperature | dVOS/dT | 2.5 | 20 | μV/°C | TA = -40°C to +125°C | 5 | |
| VOS vs power-supply (PSR) | PSR | 5 | 100 | μV/V | VS = +2.7 V to +18 V, VCM = +18 V, TA = -40°C to +125°C | 5 | |
| Input bias current, VIN- pin | IB | -16 | 8 | 16 | μA | TA = -40°C to +125°C | 5 |
| Buffer input bias current | -50 | nA | 5 | ||||
| Buffer input bias current temperature coefficient | -0.03 | 0.03 | nA/°C | 5 | |||
| PRE OUT output impedance tolerance | -30 | 30 | % | Initial resistor variation (footnote 2) | 5 | ||
| Total gain error | -1 | 0.2 | 1 | % | VSENSE = 20 mV to 100 mV | 5 | |
| Total gain error over temperature | -2 | 2 | % | TA = -40°C to +125°C | 5 | ||
| Total gain error vs temperature | 50 | ppm/°C | TA = -40°C to +125°C | 5 | |||
| Total output error | -2.2 | 0.75 | 2.2 | % | 5 | ||
| Total output error over temperature | -3 | 1 | 3 | % | TA = -40°C to +125°C | 5 | |
| Maximum capacitive load | 10 | nF | No sustained oscillation | 5 | |||
| Operating supply range | VS | 2.7 | 18 | V | TA = -40°C to +125°C | 6 | |
| Quiescent current | IQ | 700 | 900 | μA | VOUT = 2 V | 6 | |
| Quiescent current over temperature | IQ | 350 | 950 | μA | VSENSE = 0 mV, TA = -40°C to +125°C | 6 | |
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Common-mode input voltage (recommended) | VCM | -16 | 12 | 80 | V | 4 | |
| Operating supply voltage (recommended) | VS | 2.7 | 5 | 18 | V | 4 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Supply voltage | VS | 18 | V | 3 | |||
| Analog inputs differential | (VIN+), (VIN-) | -18 | 18 | V | 3 | ||
| Analog inputs common-mode | VIN+, VIN- | -16 | 80 | V | 3 | ||
| Input current into any pin | 5 | mA | 3 | ||||
| Operating temperature | -55 | 150 | °C | 3 | |||
| Junction temperature | 150 | °C | 3 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Junction-to-ambient thermal resistance | RθJA | 78.8 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 71.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 68.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 22 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 67.6 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
INA270AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina270aidr-etched.step/ina270aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina270aidr.step/ina270aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
4d71547e7ade4ead, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA270AIDR
**Texas Instruments** · Current Sense Amplifiers · SOIC-8
INA270AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Analog input; connect to the load side of the shunt resistor. |
| 2 | GND | power_in | Analog ground. |
| 3 | PRE OUT | output | Analog output of the preamp stage with 96 kΩ output impedance; connect to the input of the external filter whose output goes to BUF IN. |
| 4 | BUF IN | input | Analog input; connect to the output of the filter driven from PRE OUT. |
| 5 | OUT | output | Analog output voltage; the output swing is limited by the voltages on the V+ supply pin. |
| 6 | V+ | power_in | Power supply, +2.7 V to +18 V. |
| 7 | NC | unconnected | Not internally connected; the datasheet says to connect this pin to ground. |
| 8 | IN+ | input | Analog input; connect to the supply side of the shunt resistor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -16 | | 80 | V | TA = -40°C to +125°C | 5 |
| Common-mode rejection ratio | CMRR | 80 | 120 | | dB | VIN+ = -16 V to +80 V | 5 |
| CMRR over temperature | CMRR | 100 | 120 | | dB | VIN+ = +12 V to +80 V, TA = -40°C to +125°C | 5 |
| Offset voltage, RTI | VOS | | 0.5 | 2.5 | mV | | 5 |
| VOS over temperature | VOS | -3 | | 3 | mV | TA = -40°C to +125°C | 5 |
| VOS vs temperature | dVOS/dT | | 2.5 | 20 | μV/°C | TA = -40°C to +125°C | 5 |
| VOS vs power-supply (PSR) | PSR | | 5 | 100 | μV/V | VS = +2.7 V to +18 V, VCM = +18 V, TA = -40°C to +125°C | 5 |
| Input bias current, VIN- pin | IB | -16 | 8 | 16 | μA | TA = -40°C to +125°C | 5 |
| Buffer input bias current | | | | -50 | nA | | 5 |
| Buffer input bias current temperature coefficient | | -0.03 | | 0.03 | nA/°C | | 5 |
| PRE OUT output impedance tolerance | | -30 | | 30 | % | Initial resistor variation (footnote 2) | 5 |
| Total gain error | | -1 | 0.2 | 1 | % | VSENSE = 20 mV to 100 mV | 5 |
| Total gain error over temperature | | -2 | | 2 | % | TA = -40°C to +125°C | 5 |
| Total gain error vs temperature | | | | 50 | ppm/°C | TA = -40°C to +125°C | 5 |
| Total output error | | -2.2 | 0.75 | 2.2 | % | | 5 |
| Total output error over temperature | | -3 | 1 | 3 | % | TA = -40°C to +125°C | 5 |
| Maximum capacitive load | | | | 10 | nF | No sustained oscillation | 5 |
| Operating supply range | VS | 2.7 | | 18 | V | TA = -40°C to +125°C | 6 |
| Quiescent current | IQ | | 700 | 900 | μA | VOUT = 2 V | 6 |
| Quiescent current over temperature | IQ | 350 | | 950 | μA | VSENSE = 0 mV, TA = -40°C to +125°C | 6 |
| Specified temperature range | | -40 | | 125 | °C | | 6 |
| Common-mode input voltage (recommended) | VCM | -16 | 12 | 80 | V | | 4 |
| Operating supply voltage (recommended) | VS | 2.7 | 5 | 18 | V | | 4 |
| Operating free-air temperature | TA | -40 | 125 | | °C | | 4 |
| Supply voltage | VS | | | 18 | V | | 3 |
| Analog inputs differential | (VIN+), (VIN-) | -18 | | 18 | V | | 3 |
| Analog inputs common-mode | VIN+, VIN- | -16 | | 80 | V | | 3 |
| Input current into any pin | | | | 5 | mA | | 3 |
| Operating temperature | | -55 | | 150 | °C | | 3 |
| Junction temperature | | | | 150 | °C | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| Junction-to-ambient thermal resistance | RθJA | | 78.8 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 71.6 | | °C/W | | 4 |
| Junction-to-board thermal resistance | RθJB | | 68.2 | | °C/W | | 4 |
| Junction-to-top characterization parameter | ψJT | | 22 | | °C/W | | 4 |
| Junction-to-board characterization parameter | ψJB | | 67.6 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `INA270AIDR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ina270aidr-etched.step` / `ina270aidr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina270aidr.step` / `ina270aidr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina270.pdf) (28 pp, sha256 `4d71547e7ade4ead`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina270aidr-datasheet.pdf)