Generated by kicad-footprint-generator · KiCad file format 20260206
INA270AIDR
Texas Instruments · Current Sense Amplifiers · SOIC-8
INA270AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Analog input; connect to the load side of the shunt resistor. |
| 2 | GND | power_in | Analog ground. |
| 3 | PRE OUT | output | Analog output of the preamp stage with 96 kΩ output impedance; connect to the input of the external filter whose output goes to BUF IN. |
| 4 | BUF IN | input | Analog input; connect to the output of the filter driven from PRE OUT. |
| 5 | OUT | output | Analog output voltage; the output swing is limited by the voltages on the V+ supply pin. |
| 6 | V+ | power_in | Power supply, +2.7 V to +18 V. |
| 7 | NC | unconnected | Not internally connected; the datasheet says to connect this pin to ground. |
| 8 | IN+ | input | Analog input; connect to the supply side of the shunt resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -16 | 80 | V | TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio | CMRR | 80 | 120 | dB | VIN+ = -16 V to +80 V | 5 | |
| CMRR over temperature | CMRR | 100 | 120 | dB | VIN+ = +12 V to +80 V, TA = -40°C to +125°C | 5 | |
| Offset voltage, RTI | VOS | 0.5 | 2.5 | mV | 5 | ||
| VOS over temperature | VOS | -3 | 3 | mV | TA = -40°C to +125°C | 5 | |
| VOS vs temperature | dVOS/dT | 2.5 | 20 | μV/°C | TA = -40°C to +125°C | 5 | |
| VOS vs power-supply (PSR) | PSR | 5 | 100 | μV/V | VS = +2.7 V to +18 V, VCM = +18 V, TA = -40°C to +125°C | 5 | |
| Input bias current, VIN- pin | IB | -16 | 8 | 16 | μA | TA = -40°C to +125°C | 5 |
| Buffer input bias current | -50 | nA | 5 | ||||
| Buffer input bias current temperature coefficient | -0.03 | 0.03 | nA/°C | 5 | |||
| PRE OUT output impedance tolerance | -30 | 30 | % | Initial resistor variation (footnote 2) | 5 | ||
| Total gain error | -1 | 0.2 | 1 | % | VSENSE = 20 mV to 100 mV | 5 | |
| Total gain error over temperature | -2 | 2 | % | TA = -40°C to +125°C | 5 | ||
| Total gain error vs temperature | 50 | ppm/°C | TA = -40°C to +125°C | 5 | |||
| Total output error | -2.2 | 0.75 | 2.2 | % | 5 | ||
| Total output error over temperature | -3 | 1 | 3 | % | TA = -40°C to +125°C | 5 | |
| Maximum capacitive load | 10 | nF | No sustained oscillation | 5 | |||
| Operating supply range | VS | 2.7 | 18 | V | TA = -40°C to +125°C | 6 | |
| Quiescent current | IQ | 700 | 900 | μA | VOUT = 2 V | 6 | |
| Quiescent current over temperature | IQ | 350 | 950 | μA | VSENSE = 0 mV, TA = -40°C to +125°C | 6 | |
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Common-mode input voltage (recommended) | VCM | -16 | 12 | 80 | V | 4 | |
| Operating supply voltage (recommended) | VS | 2.7 | 5 | 18 | V | 4 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Supply voltage | VS | 18 | V | 3 | |||
| Analog inputs differential | (VIN+), (VIN-) | -18 | 18 | V | 3 | ||
| Analog inputs common-mode | VIN+, VIN- | -16 | 80 | V | 3 | ||
| Input current into any pin | 5 | mA | 3 | ||||
| Operating temperature | -55 | 150 | °C | 3 | |||
| Junction temperature | 150 | °C | 3 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Junction-to-ambient thermal resistance | RθJA | 78.8 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 71.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 68.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 22 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 67.6 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
INA270AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina270aidr-etched.step/ina270aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina270aidr.step/ina270aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
4d71547e7ade4ead, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).