Generated by kicad-footprint-generator · KiCad file format 20260206
INA241A1IDGKR
Texas Instruments · IC · VSSOP-8
INA241A1IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side applications connect to the load side of the sense resistor, and for low-side applications connect to the ground side of the sense resistor. |
| 2 | GND | power_in | Ground pin. |
| 3 | REF2 | input | Reference 2 voltage input; connect to a voltage potential from 0V to VS. |
| 4 | NC | unconnected | Reserved pin; connect to ground. |
| 5 | OUT | output | Output voltage; the output can range from 20mV to 200mV below the supply voltage. |
| 6 | VS | power_in | Power supply pin, 2.7V to 20V. |
| 7 | REF1 | input | Reference 1 voltage input; connect to a voltage potential from 0V to VS. |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side applications connect to the bus-voltage side of the sense resistor, and for low-side applications connect to the load side of the sense resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 22 | V | 4 | |||
| Differential analog input voltage (VIN+) − (VIN−) | -30 | 30 | V | 4 | |||
| Common-mode analog input voltage (VIN+, VIN−) | -20 | 120 | V | 4 | |||
| REF1, REF2, NC inputs voltage | -0.3 | V | min = GND − 0.3 V; max printed as VS + 0.3 V (not numeric) | 4 | |||
| Output voltage | -0.3 | V | min = GND − 0.3 V; max printed as VS + 0.3 V (not numeric) | 4 | |||
| Operating free-air temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range | VCM | -5 | 48 | 110 | V | 4 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 4 | |
| Ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 167.2 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 58.9 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 88.9 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 8.1 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 87.4 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Common-mode input range | VCM | -5 | 110 | V | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Common-mode rejection ratio, input-referred (INA241A) | CMRR | 150 | 166 | dB | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Offset voltage, input-referred (INA241A1) | Vos | -20 | 5 | 20 | µV | VSENSE = 0mV | 5 |
| Offset voltage drift, input-referred (INA241A1) | dVos/dT | -250 | 50 | 250 | nV/°C | TA = -40°C to 125°C | 5 |
| Power-supply rejection ratio, input-referred (INA241A1) | PSRR | -1 | 0.2 | 1 | µV/V | VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C | 5 |
| Input bias current | IB | 25 | 35 | 45 | µA | IB+, IB-, VSENSE = 0mV | 5 |
| Reference input range | 0 | V | 5 | ||||
| Gain error (INA241A1) | GERR | -0.01 | 0.002 | 0.01 | % | (GND + 50mV) < VOUT < (VS - 200mV), INA241A1, INA241A2, INA241A3 | 6 |
| Gain error drift (INA241A1) | -1 | 0.05 | 1 | ppm/°C | TA = -40°C to +125°C, INA241A1, INA241A2, INA241A3 | 6 | |
| Output swing to ground | 8 | 20 | mV | RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C | 6 | ||
| Reference voltage rejection ratio, input-referred (INA241A1) | RVRR | -2.5 | 1 | 2.5 | µV/V | VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA241A1 | 6 |
| Reference divider accuracy (INA241A1, INA241A2) | -0.005 | 0.002 | 0.005 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND or VREF1 = GND, VREF2 = VS, TA = -40°C to +125°C | 6 | |
| Supply voltage | VS | 2.7 | 20 | V | 7 | ||
| Quiescent current | IQ | 2.5 | 3 | mA | VSENSE = 0mV | 7 | |
| Quiescent current | IQ | 3.2 | mA | VSENSE = 0mV, TA = -40°C to +125°C | 7 | ||
| Specified ambient temperature range | TA | -40 | 125 | °C | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
INA241A1IDGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina241a1idgkr-etched.step/ina241a1idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina241a1idgkr.step/ina241a1idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
d0f0d3a73c1bc2b4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).