Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA241A1IDGKR

Texas Instruments · IC · VSSOP-8

INA241A1IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN- input Current-sense amplifier negative input; for high-side applications connect to the load side of the sense resistor, and for low-side applications connect to the ground side of the sense resistor.
2 GND power_in Ground pin.
3 REF2 input Reference 2 voltage input; connect to a voltage potential from 0V to VS.
4 NC unconnected Reserved pin; connect to ground.
5 OUT output Output voltage; the output can range from 20mV to 200mV below the supply voltage.
6 VS power_in Power supply pin, 2.7V to 20V.
7 REF1 input Reference 1 voltage input; connect to a voltage potential from 0V to VS.
8 IN+ input Current-sense amplifier positive input; for high-side applications connect to the bus-voltage side of the sense resistor, and for low-side applications connect to the load side of the sense resistor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 22 V 4
Differential analog input voltage (VIN+) − (VIN−) -30 30 V 4
Common-mode analog input voltage (VIN+, VIN−) -20 120 V 4
REF1, REF2, NC inputs voltage -0.3 V min = GND − 0.3 V; max printed as VS + 0.3 V (not numeric) 4
Output voltage -0.3 V min = GND − 0.3 V; max printed as VS + 0.3 V (not numeric) 4
Operating free-air temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input range VCM -5 48 110 V 4
Operating supply range VS 2.7 5 20 V 4
Ambient temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 167.2 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-case (top) thermal resistance RθJC(top) 58.9 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-board thermal resistance RθJB 88.9 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-top characterization parameter ΨJT 8.1 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-board characterization parameter ΨJB 87.4 °C/W DGK (VSSOP) 8-pin package 4
Common-mode input range VCM -5 110 V VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C 5
Common-mode rejection ratio, input-referred (INA241A) CMRR 150 166 dB VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C 5
Offset voltage, input-referred (INA241A1) Vos -20 5 20 µV VSENSE = 0mV 5
Offset voltage drift, input-referred (INA241A1) dVos/dT -250 50 250 nV/°C TA = -40°C to 125°C 5
Power-supply rejection ratio, input-referred (INA241A1) PSRR -1 0.2 1 µV/V VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C 5
Input bias current IB 25 35 45 µA IB+, IB-, VSENSE = 0mV 5
Reference input range 0 V 5
Gain error (INA241A1) GERR -0.01 0.002 0.01 % (GND + 50mV) < VOUT < (VS - 200mV), INA241A1, INA241A2, INA241A3 6
Gain error drift (INA241A1) -1 0.05 1 ppm/°C TA = -40°C to +125°C, INA241A1, INA241A2, INA241A3 6
Output swing to ground 8 20 mV RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C 6
Reference voltage rejection ratio, input-referred (INA241A1) RVRR -2.5 1 2.5 µV/V VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA241A1 6
Reference divider accuracy (INA241A1, INA241A2) -0.005 0.002 0.005 % VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND or VREF1 = GND, VREF2 = VS, TA = -40°C to +125°C 6
Supply voltage VS 2.7 20 V 7
Quiescent current IQ 2.5 3 mA VSENSE = 0mV 7
Quiescent current IQ 3.2 mA VSENSE = 0mV, TA = -40°C to +125°C 7
Specified ambient temperature range TA -40 125 °C 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: INA241A1IDGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina241a1idgkr-etched.step / ina241a1idgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina241a1idgkr.step / ina241a1idgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 d0f0d3a73c1bc2b4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF