component

INA240

Public Made by Adom

by adom

TI bidirectional current-sense amplifier, SOIC-8. -4 to 80 V common-mode, enhanced PWM rejection. Datasheet-verified.

componentamplifiercurrent-senseinstrumentationmotor-controlsoic-8texas-instruments
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
Name Last commit message Last updated
docs ina240: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
viewers cross-highlight symbol + footprint viewers · Ray 2mo ago
ina240-etched.fit.json ina240: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
ina240-etched.glb ina240: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
ina240-etched.step ina240: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
INA240.adom-lbr.json INA240: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray 2mo ago
ina240.glb Publish 0.1.0 · Ray 2mo ago
ina240.kicad_mod Publish 0.1.0 · Ray 2mo ago
ina240.kicad_sym Publish 0.1.0 · Ray 2mo ago
ina240.lbr add validated EAGLE .lbr (Fusion library) · Ray 2mo ago
INA240.lbr INA240: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray 2mo ago
ina240.step add .step (Fusion 3D source) · Ray 2mo ago
package.json Publish 0.1.0 · Ray 2mo ago
page.json ina240: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 1mo ago
README.md ina240: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 1mo ago

INA240

Texas Instruments · Bidirectional current-sense amplifier · SOIC-8

A high- and low-side, bidirectional current-sense amplifier in SOIC-8, built for measuring motor and solenoid currents. It reads the small voltage across a shunt resistor whose common-mode can sit anywhere from -4 V to +80 V, independent of its own supply, so it works on the high side of a battery rail or across a low-side shunt. Its standout feature is enhanced PWM rejection: it rejects the large common-mode steps that switching motor drives produce, giving a clean current signal where an ordinary op-amp shunt monitor would ring. A REF input centers the output for bidirectional (charge/discharge, forward/reverse) sensing. Fixed gains of 20 to 200 V/V are offered by variant. Runs 2.7-5.5 V.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection. Reserved - connect to ground or leave floating.
2 IN+ input Non-inverting differential analog input. Connect to the supply (high) side of the shunt resistor. Common-mode range −4 V to +80 V independent of VS.
3 IN- input Inverting differential analog input. Connect to the load side of the shunt resistor. Shares the −4 V to +80 V common-mode range with IN+.
4 GND power_in Analog ground / device ground return.
5 VS power_in Positive supply, 2.7 V to 5.5 V. Bypass to GND with a 0.1 µF ceramic close to the pin. Quiescent current 1.8 mA typ, 2.4 mA max.
6 REF2 input Reference-2 input for setting the output midpoint. Valid input range 0 V to VS. Tie to VS or to a second reference to configure unidirectional or bidirectional output midpoint.
7 REF1 input Reference-1 input for setting the output midpoint. Valid input range 0 V to VS. Combined with REF2 to form the output offset per the Adjusting the Output Midpoint With the Reference Pins section.
8 OUT output Buffered analog output voltage, VOUT = Gain × VSENSE + VREF, where Gain is 20/50/100/200 V/V for A1/A2/A3/A4. Swings from GND+10 mV to VS−0.2 V into 10 kΩ.

Key specifications

Parameter Value
Type Bidirectional current-sense amplifier
Common-mode range -4 V to +80 V
Feature enhanced PWM rejection
Gain 20 / 50 / 100 / 200 V/V (by variant)
Bandwidth 400 kHz
Reference REF pins (bidirectional zero)
Supply voltage 2.7-5.5 V
Package SOIC-8

Ordering variants

Same part, different packaging or reel option.

  • INA240A1D (SOIC-8, gain 20)
  • INA240A2D (SOIC-8, gain 50)

CAD (KiCad official)

  • Symbol: Amplifier_Current:INA240A1D
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D)
  • 3D model files: ina240-etched.step / ina240-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina240.step / ina240.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 c9d26e72ebdb52a1, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF