component

INA228AIDGSR

Public Made by Adom

by adom

Texas Instruments Power Supply Controllers, Monitors, VSSOP-10-0.5mm. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentamplifiers/comparatorsina228aidgsrboard-derived

Verified INA228AIDGSR

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 5 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's INA228 datasheet (SLYS021A, revised May 2022)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SLYS021A, revised May 2022; sha256 matches ti.com/lit/ds/symlink/ina228.pdf fetched 2026-10-27)
  • ✓All 10 pins match Table 5-1 and Figure 5-1 (p.3) by number and name; renamed to the datasheet's spelling: 3 ~{Alert} -> ALERT (no overbar in the datasheet), 8 Vbus -> VBUS, 9 Vin- -> IN-, 10 Vin+ -> IN+ (the datasheet prints IN– with a typographic dash)
  • ✓Pin types agree with Table 5-1: A0/A1/SCL inputs, SDA bidirectional, ALERT open-drain output, VBUS/IN+/IN- analog inputs, VS/GND power
  • ✓Pins 9 and 10 described from Table 5-1; every description cites p.3
  • ✓Footprint vs DGS0010A (p.45-46): 10 pads 1.45 x 0.30 mm at e = 0.50 mm, as TI's land pattern example; pad centres 4.30 mm apart vs TI's (4.4) reference, both cover the lead (E 4.75-5.05, L 0.4-0.7); pad width 0.30 over b 0.17-0.27; no exposed pad; pin 1 top-left
  • ✓3D body 4.90 x 3.00 x 1.10 mm against E 4.75-5.05 (lead span), D 2.9-3.1, A 1.1 max; Z-up, seated on z = 0, centred on the pads
  • ✓DigiKey 296-INA228AIDGSRTR-ND and Mouser 595-INA228AIDGSR present
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass; adom-lbr validate OK
Evidencedatasheet (Texas Instruments)
Verified files✓ ina228aidgsr.kicad_sym✓ ina228aidgsr.kicad_mod✓ ina228aidgsr.step
8 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: IN+, IN-superseded
reviewfor all variants
  • •Datasheet pins not matched to a symbol pin: IN+, IN-
8 Oct 2026Claude (AI build)Pin names differ between the board symbol and the datasheet (often equivalent naming; chec...superseded
reviewfor all variants
  • •Pin names differ between the board symbol and the datasheet (often equivalent naming; check): 9: symbol "Vin-" vs datasheet "IN-"; 10: symbol "Vin+" vs datasheet "IN+"
8 Oct 2026Claude (AI build)2 of 10 pins have no datasheet description yet (pins 9, 10).superseded
reviewfor all variants
  • •2 of 10 pins have no datasheet description yet (pins 9, 10).
8 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • •8 of 10 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! ina228aidgsr.kicad_sym✓ ina228aidgsr.kicad_mod✓ ina228aidgsr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
ina228aidgsr / ina228aidgsr.kicad_sym
HistoryDownload
Caleb Publish 0.1.2 f2e9f21 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259
(kicad_symbol_lib
	(version 20241209)
	(generator "board-derived")
	(generator_version "1.0")
	(symbol "INA228AIDGSR"
		(exclude_from_sim no)
		(in_bom yes)
		(on_board yes)
		(in_pos_files yes)
		(duplicate_pin_numbers_are_jumpers no)
		(property "Reference" "U"
			(at -6.35 11.43 0)
			(show_name no)
			(do_not_autoplace no)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "Manufacturer" "Texas Instruments"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(property "DigiKey" "296-INA228AIDGSRTR-ND"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(property "Mouser" "595-INA228AIDGSR"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(property "Value" "INA228AIDGSR"
			(at 3.81 11.43 0)
			(show_name no)
			(do_not_autoplace no)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "Footprint" "Package_SO:TSSOP-10_3x3mm_P0.5mm"
			(at 20.32 -11.43 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "Datasheet" "https://www.ti.com/lit/ds/symlink/ina228.pdf"
			(at 8.89 -2.54 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "Description" "-300mV~85V -40℃~+125℃ 0.01uV/℃ 10mA 154dB 1uV 2.5nA 2.7V~5.5V 640uA High-side detection、Low-side detection、Bidirectional detection、Input filter、Power monitoring、Programmable threshold alarm、Integrated ADC、Enable/shutdown function ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHS"
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "ki_keywords" "ADC I2C 20-Bit Oversampling Current Shunt"
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "ki_fp_filters" "VSSOP*3x3mm*P0.5mm*"
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "MPN" "INA228AIDGSR"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(property "LCSC" "C2887910"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(symbol "INA228AIDGSR_0_1"
			(rectangle
				(start 7.62 10.16)
				(end -7.62 -10.16)
				(stroke (width 0.254) (type default))
				(fill (type background))
			)
		)
		(symbol "INA228AIDGSR_1_1"
			(pin input line
				(at 10.16 7.62 180)
				(length 2.54)
				(name "A1"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "1"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin input line
				(at 10.16 5.08 180)
				(length 2.54)
				(name "A0"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "2"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin open_collector line
				(at 10.16 -7.62 180)
				(length 2.54)
				(name "ALERT"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "3"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin bidirectional line
				(at 10.16 0 180)
				(length 2.54)
				(name "SDA"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "4"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin input line
				(at 10.16 -2.54 180)
				(length 2.54)
				(name "SCL"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "5"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin power_in line
				(at 0 12.7 270)
				(length 2.54)
				(name "VS"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "6"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin power_in line
				(at 0 -12.7 90)
				(length 2.54)
				(name "GND"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "7"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin input line
				(at -10.16 7.62 0)
				(length 2.54)
				(name "VBUS"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "8"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin input line
				(at -10.16 -5.08 0)
				(length 2.54)
				(name "IN-"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "9"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin input line
				(at -10.16 -2.54 0)
				(length 2.54)
				(name "IN+"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "10"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
		)
		(embedded_fonts no)
	)
)