component

INA228AIDGSR

Public Made by Adom

by adom

Texas Instruments Power Supply Controllers, Monitors, VSSOP-10-0.5mm. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentamplifiers/comparatorsina228aidgsrboard-derived

Verified INA228AIDGSR

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 5 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's INA228 datasheet (SLYS021A, revised May 2022)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SLYS021A, revised May 2022; sha256 matches ti.com/lit/ds/symlink/ina228.pdf fetched 2026-10-27)
  • ✓All 10 pins match Table 5-1 and Figure 5-1 (p.3) by number and name; renamed to the datasheet's spelling: 3 ~{Alert} -> ALERT (no overbar in the datasheet), 8 Vbus -> VBUS, 9 Vin- -> IN-, 10 Vin+ -> IN+ (the datasheet prints IN– with a typographic dash)
  • ✓Pin types agree with Table 5-1: A0/A1/SCL inputs, SDA bidirectional, ALERT open-drain output, VBUS/IN+/IN- analog inputs, VS/GND power
  • ✓Pins 9 and 10 described from Table 5-1; every description cites p.3
  • ✓Footprint vs DGS0010A (p.45-46): 10 pads 1.45 x 0.30 mm at e = 0.50 mm, as TI's land pattern example; pad centres 4.30 mm apart vs TI's (4.4) reference, both cover the lead (E 4.75-5.05, L 0.4-0.7); pad width 0.30 over b 0.17-0.27; no exposed pad; pin 1 top-left
  • ✓3D body 4.90 x 3.00 x 1.10 mm against E 4.75-5.05 (lead span), D 2.9-3.1, A 1.1 max; Z-up, seated on z = 0, centred on the pads
  • ✓DigiKey 296-INA228AIDGSRTR-ND and Mouser 595-INA228AIDGSR present
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass; adom-lbr validate OK
Evidencedatasheet (Texas Instruments)
Verified files✓ ina228aidgsr.kicad_sym✓ ina228aidgsr.kicad_mod✓ ina228aidgsr.step
8 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: IN+, IN-superseded
reviewfor all variants
  • •Datasheet pins not matched to a symbol pin: IN+, IN-
8 Oct 2026Claude (AI build)Pin names differ between the board symbol and the datasheet (often equivalent naming; chec...superseded
reviewfor all variants
  • •Pin names differ between the board symbol and the datasheet (often equivalent naming; check): 9: symbol "Vin-" vs datasheet "IN-"; 10: symbol "Vin+" vs datasheet "IN+"
8 Oct 2026Claude (AI build)2 of 10 pins have no datasheet description yet (pins 9, 10).superseded
reviewfor all variants
  • •2 of 10 pins have no datasheet description yet (pins 9, 10).
8 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • •8 of 10 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! ina228aidgsr.kicad_sym✓ ina228aidgsr.kicad_mod✓ ina228aidgsr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
ina228aidgsr / ina228aidgsr.kicad_mod
HistoryDownload
Caleb Add component CAD, datasheet and docs (1) 568bc94 21d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303
(footprint "INA228AIDGSR"
	(layer "F.Cu")
	(descr "TSSOP, 10 Pin (https://www.ti.com/lit/ml/mpds035c/mpds035c.pdf, https://www.ti.com/lit/ds/symlink/ads1115.pdf#page=50, https://www.nxp.com/docs/en/package-information/SOT552-1.pdf)"
	)
	(tags "TSSOP SO Texas_DGS0010A Texas_VSSOP-10 NXP_SOT552-1 MSOP-10_3x3mm_P0.5mm VSSOP-10_3x3mm_P0.5mm"
	)
	(property "Reference" "REF**"
		(at 0 -2.45)
		(layer "F.SilkS")
		(hide yes)
		(uuid "274a3225-64a5-4f89-abf6-ddeb97a0a7b3")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Value" "INA228AIDGSR"
		(at 0 2.45)
		(layer "F.Fab")
		(hide yes)
		(uuid "538963db-660b-4fc5-a078-4b7d852732c2")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Datasheet" "https://www.ti.com/lit/ds/symlink/ina228.pdf"
		(at 0 0)
		(layer "F.Fab")
		(hide yes)
		(uuid "be2b251c-a6a0-48ca-b3b6-4571a2c4f16d")
		(effects
			(font (size 1.27 1.27))
		)
	)
	(property "Description" "High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-85V) with I2C, SMBus-, and PMBus-Compatible Interface, VSSOP-10"
		(at 0 0)
		(layer "F.Fab")
		(hide yes)
		(uuid "f7cb2995-5d7b-4195-97d9-554007c9218a")
		(effects
			(font (size 1.27 1.27))
		)
	)
	(property "PN" "INA228AIDGSR"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "78046ea2-4c9a-457a-8850-df081fc98196")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Substitue" "INA228AQDGSRQ1"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "bb11959a-afbb-471b-bdf0-9003df0529f0")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "LCSC" "C2887910"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "bdb182da-f17c-4c30-bda0-8f1d7009bd86")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "MFR" "Texas Instruments"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "c64389a9-5f5a-4ffc-ab96-0bd9828bff4d")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property ki_fp_filters "VSSOP*3x3mm*P0.5mm*")
	(units
		(unit (name "A") (pins "8" "10" "9" "6" "7" "1" "2" "4" "5" "3"))
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.61 1.61)
		(end -1.61 1.41)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "6f578004-bd47-4545-9e69-2f1c68f31570")
	)
	(fp_line
		(start 1.61 1.61)
		(end -1.61 1.61)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "d839f068-c202-46f1-b225-611243966cd7")
	)
	(fp_line
		(start 1.61 1.41)
		(end 1.61 1.61)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "5131a067-fbfc-44e9-b165-00f37ffa3021")
	)
	(fp_line
		(start -1.61 -1.41)
		(end -1.61 -1.61)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "4d01d4df-1d08-42fa-9c45-8054ca0132b4")
	)
	(fp_line
		(start -1.61 -1.61)
		(end 1.61 -1.61)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "aff4e868-6fe4-4364-85a1-d0ec3dee2327")
	)
	(fp_line
		(start 1.61 -1.61)
		(end 1.61 -1.41)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "b7308d08-8c52-45a8-9442-0a44abfc0b75")
	)
	(fp_poly
		(pts (xy -2.16 -1.41) (xy -2.4 -1.74) (xy -1.92 -1.74))
		(stroke (width 0.12) (type solid))
		(fill yes)
		(layer "F.SilkS")
		(uuid "2d5c4d2b-1247-4f22-9b48-c4ae5888bfd8")
	)
	(fp_line
		(start -1.75 1.75)
		(end -1.75 1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "07a9183c-a50d-4a54-a196-43f18c8d8b7a")
	)
	(fp_line
		(start 1.75 1.75)
		(end -1.75 1.75)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "1a36715d-7c7b-4479-b493-c582272601da")
	)
	(fp_line
		(start -3.13 1.4)
		(end -3.13 -1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "e944e048-afef-4e8a-bb12-f4835d6c4139")
	)
	(fp_line
		(start -1.75 1.4)
		(end -3.13 1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "6ebafa0e-8d6f-4756-950f-13f093451234")
	)
	(fp_line
		(start 1.75 1.4)
		(end 1.75 1.75)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "bf8911bb-50a0-4ef3-9ace-7f1842483814")
	)
	(fp_line
		(start 3.13 1.4)
		(end 1.75 1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "3459ed8b-1dba-4113-9342-515ac07b7a68")
	)
	(fp_line
		(start -3.13 -1.4)
		(end -1.75 -1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "8ff3cd74-11bd-456c-9a58-72ef925db867")
	)
	(fp_line
		(start -1.75 -1.4)
		(end -1.75 -1.75)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "a495530b-84c5-459a-a708-b2127b6e11f5")
	)
	(fp_line
		(start 1.75 -1.4)
		(end 3.13 -1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "42b6aef8-7f11-4634-b030-6f375c3505d8")
	)
	(fp_line
		(start 3.13 -1.4)
		(end 3.13 1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "9954c869-dc7b-4934-932a-e81578b5f559")
	)
	(fp_line
		(start -1.75 -1.75)
		(end 1.75 -1.75)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "c6f75300-644d-4af8-bdf8-4eb709981b35")
	)
	(fp_line
		(start 1.75 -1.75)
		(end 1.75 -1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "599c0ee4-7d5f-4365-a8d9-956b04a5e531")
	)
	(fp_poly
		(pts (xy -0.75 -1.5) (xy 1.5 -1.5) (xy 1.5 1.5) (xy -1.5 1.5) (xy -1.5 -0.75))
		(stroke (width 0.1) (type solid))
		(fill no)
		(layer "F.Fab")
		(uuid "7970985e-9d89-461e-b238-f45d87efd8cc")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0)
		(layer "F.Fab")
		(uuid "b4e85639-66d7-40bf-8595-b4d7447ee5f8")
		(effects
			(font (size 0.75 0.75) (thickness 0.11))
		)
	)
	(pad "1" smd roundrect
		(at -2.15 -1)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at -2.15 -0.5)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "3" smd roundrect
		(at -2.15 0)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "4" smd roundrect
		(at -2.15 0.5)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "5" smd roundrect
		(at -2.15 1)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "6" smd roundrect
		(at 2.15 1)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "7" smd roundrect
		(at 2.15 0.5)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "8" smd roundrect
		(at 2.15 0)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "9" smd roundrect
		(at 2.15 -0.5)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "10" smd roundrect
		(at 2.15 -1)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/TSSOP-10_3x3mm_P0.5mm.step"
		(offset (xyz 0 0 0))
		(scale (xyz 1 1 1))
		(rotate (xyz 0 0 0))
	)
)