main
History Download
Ray Publish 0.1.0 de19085

INA226AIDGSR

Texas Instruments · Current Sense Amplifiers · VSOP-10

INA226AIDGSR from Texas Instruments, in a VSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A1 input Address pin connected to GND, SCL, SDA, or VS to set the I2C address, with pin settings and addresses shown in Table 6-2.
2 A0 input Address pin connected to GND, SCL, SDA, or VS to set the I2C address, with pin settings and addresses shown in Table 6-2.
3 Alert output Multi-functional alert output, implemented as an open-drain output.
4 SDA bidirectional Serial bus data line, open-drain input/output.
5 SCL input Serial bus clock line, open-drain input.
6 VS power_in Power supply input, 2.7 V to 5.5 V.
7 GND power_in Analog ground.
8 VBUS power_in Bus voltage input.
9 IN- input Analog input; connect to the load side of the shunt resistor.
10 IN+ input Analog input; connect to the supply side of the shunt resistor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSOP-10
Category Amplifiers/Comparators
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VVS 6 V 4
Analog inputs differential voltage VIN+, VIN- -40 40 V Differential (VIN+, VIN-) 4
Analog inputs common-mode voltage (VIN+ + VIN-) / 2 -0.3 40 V Common-Mode 4
Bus voltage input VVBUS -0.3 40 V 4
SDA voltage VSDA 6 V Minimum printed as GND, 0.3 V 4
Input current into any pin IIN 5 mA Input current into any pin 4
Open-drain digital output current IOUT 10 mA Open-drain digital output current 4
Junction temperature TJ 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Operating free-air temperature TA -40 125 °C 4
Shunt voltage input range -81.9175 81.92 mV 5
Bus voltage input range 0 36 V 5
Common-mode rejection CMRR 126 140 dB 0 V ≤ VIN+ ≤ 36 V 5
Shunt offset voltage, RTI VOS -10 2.5 10 μV 5
Shunt offset voltage vs temperature 0.02 0.1 μV/°C -40°C ≤ TA ≤ 125°C 5
Shunt offset voltage vs power supply PSRR -2.5 2.5 μV/V 2.7 V ≤ VS ≤ 5.5 V 5
Bus offset voltage, RTI VOS -7.5 1.25 7.5 mV 5
Bus offset voltage vs temperature 10 40 μV/°C -40°C ≤ TA ≤ 125°C 5
Bus offset voltage vs power supply PSRR -0.5 0.5 mV/V 5
Input leakage, power-down mode 0.1 0.5 μA (IN+ pin) + (IN- pin), Power-down mode 5
Shunt voltage gain error 0.02 0.1 % 5
Shunt voltage gain error vs temperature 10 50 ppm/°C -40°C ≤ TA ≤ 125°C 5
Bus voltage gain error 0.02 0.1 % 5
Bus voltage gain error vs temperature 10 50 ppm/°C -40°C ≤ TA ≤ 125°C 5
Differential nonlinearity -0.1 0.1 LSB 5
ADC conversion time tCT 140 154 μs CT bit = 000 5
ADC conversion time tCT 204 224 μs CT bit = 001 5
ADC conversion time tCT 332 365 μs CT bit = 010 5
ADC conversion time tCT 588 646 μs CT bit = 011 5
ADC conversion time tCT 1.1 1.21 ms CT bit = 100 5
ADC conversion time tCT 2.116 2.328 ms CT bit = 101 5
ADC conversion time tCT 4.156 4.572 ms CT bit = 110 5
ADC conversion time tCT 8.244 9.068 ms CT bit = 111 5
SMBus timeout 28 35 ms 5
Leakage input current 0.1 1 μA 0 V ≤ VSCL ≤ VVS, 0 V ≤ VSDA ≤ VVS, 0 V ≤ VAlert ≤ VVS, 0 V ≤ VA0 ≤ VVS, 0 V ≤ VA1 ≤ VVS 5
High-level input voltage VIH 6 V Minimum printed as 0.7×VVS 5
Low-level input voltage VIL -0.5 V Maximum printed as 0.3×VVS 6
Low-level output voltage, SDA, Alert VOL 0 0.4 V IOL = 3 mA 6
Operating supply range VVS 2.7 5.5 V 6
Quiescent current IQ 330 420 μA 6
Quiescent current, power-down (shutdown) mode IQ 0.5 2 μA Power-down (shutdown) mode 6
Junction-to-ambient thermal resistance RθJA 144.6 °C/W DGS (VSSOP), 10 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 53.3 °C/W DGS (VSSOP), 10 pins 4
Junction-to-board thermal resistance RθJB 80.4 °C/W DGS (VSSOP), 10 pins 4
Junction-to-top characterization parameter ΨJT 3.5 °C/W DGS (VSSOP), 10 pins 4
Junction-to-board characterization parameter YJB 78.9 °C/W DGS (VSSOP), 10 pins 4

CAD (KiCad official)

  • Symbol: INA226AIDGSR
  • Footprint: Sensor_Current:AKM_CQ_VSOP-24_5.6x7.9mm_P0.65mm
  • 3D model: VSOP-10, generated on the KiCad land (body 5.6 x 7.9 mm, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina226aidgsr-etched.step / ina226aidgsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina226aidgsr.step / ina226aidgsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 c9b67f886d4a5241, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF