Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
INA226AIDGSR
Texas Instruments · Current Sense Amplifiers · VSOP-10
INA226AIDGSR from Texas Instruments, in a VSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | input | Address pin connected to GND, SCL, SDA, or VS to set the I2C address, with pin settings and addresses shown in Table 6-2. |
| 2 | A0 | input | Address pin connected to GND, SCL, SDA, or VS to set the I2C address, with pin settings and addresses shown in Table 6-2. |
| 3 | Alert | output | Multi-functional alert output, implemented as an open-drain output. |
| 4 | SDA | bidirectional | Serial bus data line, open-drain input/output. |
| 5 | SCL | input | Serial bus clock line, open-drain input. |
| 6 | VS | power_in | Power supply input, 2.7 V to 5.5 V. |
| 7 | GND | power_in | Analog ground. |
| 8 | VBUS | power_in | Bus voltage input. |
| 9 | IN- | input | Analog input; connect to the load side of the shunt resistor. |
| 10 | IN+ | input | Analog input; connect to the supply side of the shunt resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSOP-10 |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VVS | 6 | V | 4 | |||
| Analog inputs differential voltage | VIN+, VIN- | -40 | 40 | V | Differential (VIN+, VIN-) | 4 | |
| Analog inputs common-mode voltage | (VIN+ + VIN-) / 2 | -0.3 | 40 | V | Common-Mode | 4 | |
| Bus voltage input | VVBUS | -0.3 | 40 | V | 4 | ||
| SDA voltage | VSDA | 6 | V | Minimum printed as GND, 0.3 V | 4 | ||
| Input current into any pin | IIN | 5 | mA | Input current into any pin | 4 | ||
| Open-drain digital output current | IOUT | 10 | mA | Open-drain digital output current | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Shunt voltage input range | -81.9175 | 81.92 | mV | 5 | |||
| Bus voltage input range | 0 | 36 | V | 5 | |||
| Common-mode rejection | CMRR | 126 | 140 | dB | 0 V ≤ VIN+ ≤ 36 V | 5 | |
| Shunt offset voltage, RTI | VOS | -10 | 2.5 | 10 | μV | 5 | |
| Shunt offset voltage vs temperature | 0.02 | 0.1 | μV/°C | -40°C ≤ TA ≤ 125°C | 5 | ||
| Shunt offset voltage vs power supply | PSRR | -2.5 | 2.5 | μV/V | 2.7 V ≤ VS ≤ 5.5 V | 5 | |
| Bus offset voltage, RTI | VOS | -7.5 | 1.25 | 7.5 | mV | 5 | |
| Bus offset voltage vs temperature | 10 | 40 | μV/°C | -40°C ≤ TA ≤ 125°C | 5 | ||
| Bus offset voltage vs power supply | PSRR | -0.5 | 0.5 | mV/V | 5 | ||
| Input leakage, power-down mode | 0.1 | 0.5 | μA | (IN+ pin) + (IN- pin), Power-down mode | 5 | ||
| Shunt voltage gain error | 0.02 | 0.1 | % | 5 | |||
| Shunt voltage gain error vs temperature | 10 | 50 | ppm/°C | -40°C ≤ TA ≤ 125°C | 5 | ||
| Bus voltage gain error | 0.02 | 0.1 | % | 5 | |||
| Bus voltage gain error vs temperature | 10 | 50 | ppm/°C | -40°C ≤ TA ≤ 125°C | 5 | ||
| Differential nonlinearity | -0.1 | 0.1 | LSB | 5 | |||
| ADC conversion time | tCT | 140 | 154 | μs | CT bit = 000 | 5 | |
| ADC conversion time | tCT | 204 | 224 | μs | CT bit = 001 | 5 | |
| ADC conversion time | tCT | 332 | 365 | μs | CT bit = 010 | 5 | |
| ADC conversion time | tCT | 588 | 646 | μs | CT bit = 011 | 5 | |
| ADC conversion time | tCT | 1.1 | 1.21 | ms | CT bit = 100 | 5 | |
| ADC conversion time | tCT | 2.116 | 2.328 | ms | CT bit = 101 | 5 | |
| ADC conversion time | tCT | 4.156 | 4.572 | ms | CT bit = 110 | 5 | |
| ADC conversion time | tCT | 8.244 | 9.068 | ms | CT bit = 111 | 5 | |
| SMBus timeout | 28 | 35 | ms | 5 | |||
| Leakage input current | 0.1 | 1 | μA | 0 V ≤ VSCL ≤ VVS, 0 V ≤ VSDA ≤ VVS, 0 V ≤ VAlert ≤ VVS, 0 V ≤ VA0 ≤ VVS, 0 V ≤ VA1 ≤ VVS | 5 | ||
| High-level input voltage | VIH | 6 | V | Minimum printed as 0.7×VVS | 5 | ||
| Low-level input voltage | VIL | -0.5 | V | Maximum printed as 0.3×VVS | 6 | ||
| Low-level output voltage, SDA, Alert | VOL | 0 | 0.4 | V | IOL = 3 mA | 6 | |
| Operating supply range | VVS | 2.7 | 5.5 | V | 6 | ||
| Quiescent current | IQ | 330 | 420 | μA | 6 | ||
| Quiescent current, power-down (shutdown) mode | IQ | 0.5 | 2 | μA | Power-down (shutdown) mode | 6 | |
| Junction-to-ambient thermal resistance | RθJA | 144.6 | °C/W | DGS (VSSOP), 10 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 53.3 | °C/W | DGS (VSSOP), 10 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 80.4 | °C/W | DGS (VSSOP), 10 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 3.5 | °C/W | DGS (VSSOP), 10 pins | 4 | ||
| Junction-to-board characterization parameter | YJB | 78.9 | °C/W | DGS (VSSOP), 10 pins | 4 |
CAD (KiCad official)
- Symbol:
INA226AIDGSR - Footprint:
Sensor_Current:AKM_CQ_VSOP-24_5.6x7.9mm_P0.65mm - 3D model: VSOP-10, generated on the KiCad land (body 5.6 x 7.9 mm, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina226aidgsr-etched.step/ina226aidgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina226aidgsr.step/ina226aidgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
c9b67f886d4a5241, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).