main
Ray
Publish 0.1.0
59acbcf
INA220BQDGSRQ1
Texas Instruments · Monitors & Reset Circuits · VSSOP-10-0.5mm
INA220BQDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | input | Address pin; connect to GND, SCL, SDA, or VS to set the I2C address per Table 1. |
| 2 | A0 | input | Address pin; connect to GND, SCL, SDA, or VS to set the I2C address per Table 1. |
| 3 | NC | unconnected | No internal connection. |
| 4 | SDA | bidirectional | Serial bus data line (open-drain digital I/O). |
| 5 | SCL | input | Serial bus clock line. |
| 6 | VS | power_in | Analog power supply, 3 V to 5.5 V. |
| 7 | GND | power_in | Analog ground. |
| 8 | VBUS | power_in | Bus voltage input, rated -0.3 V to 26 V. |
| 9 | IN- | input | Negative differential shunt voltage input; connect to the negative side of the shunt resistor, and bus voltage is measured from this pin to ground. |
| 10 | IN+ | input | Positive differential shunt voltage input; connect to the positive side of the shunt resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Supply Chip |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Bus voltage range | 0 | 32 | V | BRNG = 1 | 5 | ||
| Bus voltage range | 0 | 16 | V | BRNG = 0 | 5 | ||
| Common-mode rejection | CMR | 100 | 120 | dB | VIN+ = 0 to 26 V | 5 | |
| Offset voltage, RTI | VOS | -50 | 10 | 50 | µV | PGA = /1 | 5 |
| Offset voltage, RTI | VOS | -75 | 20 | 75 | µV | PGA = /2 | 5 |
| Offset voltage, RTI | VOS | -75 | 30 | 75 | µV | PGA = /4 | 5 |
| Offset voltage, RTI | VOS | -100 | 40 | 100 | µV | PGA = /8 | 5 |
| IN+ pin input leakage | -0.5 | 0.1 | 0.5 | µA | Power-down mode | 5 | |
| IN- pin input leakage | -0.5 | 0.1 | 0.5 | µA | Power-down mode | 5 | |
| Current measurement error | 0.2 | 0.3 | % | 5 | |||
| Current measurement error | 0.5 | % | TA = -40°C to 85°C | 5 | |||
| Bus voltage measurement error | 0.2 | 0.5 | % | VBUS = 12 V | 5 | ||
| Bus voltage measurement error | 1 | % | TA = -40°C to 85°C | 5 | |||
| ADC conversion time | 532 | 586 | µs | 12-bit | 5 | ||
| ADC conversion time | 276 | 304 | µs | 11-bit | 5 | ||
| ADC conversion time | 148 | 163 | µs | 10-bit | 5 | ||
| ADC conversion time | 84 | 93 | µs | 9-bit | 5 | ||
| SMBus timeout | 28 | 35 | ms | 5 | |||
| Leakage input current | 0.1 | 1 | µA | 0 ≤ VIN ≤ VS | 6 | ||
| Input logic-level high | VIH | 6 | V | 6 | |||
| Input logic-level low | VIL | -0.3 | V | 6 | |||
| Logic 0 output level | 0.15 | 0.4 | V | ISINK = 3 mA | 6 | ||
| High-level output leakage current | 0.1 | 1 | µA | VOUT = VS | 6 | ||
| Operating supply range | VS | 3 | 5.5 | V | 6 | ||
| Quiescent current | IQ | 0.7 | 1 | mA | 6 | ||
| Quiescent current, power-down mode | IQ | 6 | 15 | µA | 6 | ||
| Supply voltage | VS | 6 | V | 4 | |||
| Differential input voltage | VIN+ - VIN- | -26 | 26 | V | IN+ to IN- | 4 | |
| Common-mode input voltage | VCM | -0.3 | 26 | V | (VIN+ + VIN-) / 2 | 4 | |
| Voltage at VBUS pin | VVBUS | -0.3 | 26 | V | 4 | ||
| Voltage at SDA pin | VSDA | 6 | V | 4 | |||
| Input current into any pin | 5 | mA | 4 | ||||
| Open-drain digital output current | 10 | mA | 4 | ||||
| Operating temperature | -40 | 125 | °C | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Ambient temperature | TA | -25 | 85 | °C | 4 | ||
| Common-mode voltage | VCM | 12 | V | (VIN+ + VIN-) / 2 | 4 | ||
| Supply voltage | VS | 3.3 | V | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 165.4 | °C/W | DGS (10 pins) | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 53.2 | °C/W | DGS (10 pins) | 4 | ||
| Junction-to-board thermal resistance | RθJB | 86.6 | °C/W | DGS (10 pins) | 4 | ||
| Offset voltage drift | 0.16 | μV/°C | TA = -40°C to 85°C | 5 | |||
| Offset voltage versus power supply, RTI | PSRR | 10 | μV/V | VS = 3 to 5.5 V | 5 |
CAD (KiCad official)
- Symbol:
INA220BQDGSRQ1 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ina220bqdgsrq1-etched.step/ina220bqdgsrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina220bqdgsrq1.step/ina220bqdgsrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
b4d3bc69fbe2f11f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA220BQDGSRQ1
**Texas Instruments** · Monitors & Reset Circuits · VSSOP-10-0.5mm
INA220BQDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | input | Address pin; connect to GND, SCL, SDA, or VS to set the I2C address per Table 1. |
| 2 | A0 | input | Address pin; connect to GND, SCL, SDA, or VS to set the I2C address per Table 1. |
| 3 | NC | unconnected | No internal connection. |
| 4 | SDA | bidirectional | Serial bus data line (open-drain digital I/O). |
| 5 | SCL | input | Serial bus clock line. |
| 6 | VS | power_in | Analog power supply, 3 V to 5.5 V. |
| 7 | GND | power_in | Analog ground. |
| 8 | VBUS | power_in | Bus voltage input, rated -0.3 V to 26 V. |
| 9 | IN- | input | Negative differential shunt voltage input; connect to the negative side of the shunt resistor, and bus voltage is measured from this pin to ground. |
| 10 | IN+ | input | Positive differential shunt voltage input; connect to the positive side of the shunt resistor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Supply Chip |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Bus voltage range | | 0 | | 32 | V | BRNG = 1 | 5 |
| Bus voltage range | | 0 | | 16 | V | BRNG = 0 | 5 |
| Common-mode rejection | CMR | 100 | 120 | | dB | VIN+ = 0 to 26 V | 5 |
| Offset voltage, RTI | VOS | -50 | 10 | 50 | µV | PGA = /1 | 5 |
| Offset voltage, RTI | VOS | -75 | 20 | 75 | µV | PGA = /2 | 5 |
| Offset voltage, RTI | VOS | -75 | 30 | 75 | µV | PGA = /4 | 5 |
| Offset voltage, RTI | VOS | -100 | 40 | 100 | µV | PGA = /8 | 5 |
| IN+ pin input leakage | | -0.5 | 0.1 | 0.5 | µA | Power-down mode | 5 |
| IN- pin input leakage | | -0.5 | 0.1 | 0.5 | µA | Power-down mode | 5 |
| Current measurement error | | | 0.2 | 0.3 | % | | 5 |
| Current measurement error | | | | 0.5 | % | TA = -40°C to 85°C | 5 |
| Bus voltage measurement error | | | 0.2 | 0.5 | % | VBUS = 12 V | 5 |
| Bus voltage measurement error | | | | 1 | % | TA = -40°C to 85°C | 5 |
| ADC conversion time | | | 532 | 586 | µs | 12-bit | 5 |
| ADC conversion time | | | 276 | 304 | µs | 11-bit | 5 |
| ADC conversion time | | | 148 | 163 | µs | 10-bit | 5 |
| ADC conversion time | | | 84 | 93 | µs | 9-bit | 5 |
| SMBus timeout | | 28 | | 35 | ms | | 5 |
| Leakage input current | | | 0.1 | 1 | µA | 0 ≤ VIN ≤ VS | 6 |
| Input logic-level high | VIH | | | 6 | V | | 6 |
| Input logic-level low | VIL | -0.3 | | | V | | 6 |
| Logic 0 output level | | | 0.15 | 0.4 | V | ISINK = 3 mA | 6 |
| High-level output leakage current | | | 0.1 | 1 | µA | VOUT = VS | 6 |
| Operating supply range | VS | 3 | | 5.5 | V | | 6 |
| Quiescent current | IQ | | 0.7 | 1 | mA | | 6 |
| Quiescent current, power-down mode | IQ | | 6 | 15 | µA | | 6 |
| Supply voltage | VS | | | 6 | V | | 4 |
| Differential input voltage | VIN+ - VIN- | -26 | | 26 | V | IN+ to IN- | 4 |
| Common-mode input voltage | VCM | -0.3 | | 26 | V | (VIN+ + VIN-) / 2 | 4 |
| Voltage at VBUS pin | VVBUS | -0.3 | | 26 | V | | 4 |
| Voltage at SDA pin | VSDA | | | 6 | V | | 4 |
| Input current into any pin | | | | 5 | mA | | 4 |
| Open-drain digital output current | | | | 10 | mA | | 4 |
| Operating temperature | | -40 | | 125 | °C | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Ambient temperature | TA | -25 | | 85 | °C | | 4 |
| Common-mode voltage | VCM | | 12 | | V | (VIN+ + VIN-) / 2 | 4 |
| Supply voltage | VS | | 3.3 | | V | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 165.4 | | °C/W | DGS (10 pins) | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 53.2 | | °C/W | DGS (10 pins) | 4 |
| Junction-to-board thermal resistance | RθJB | | 86.6 | | °C/W | DGS (10 pins) | 4 |
| Offset voltage drift | | | 0.16 | | μV/°C | TA = -40°C to 85°C | 5 |
| Offset voltage versus power supply, RTI | PSRR | | 10 | | μV/V | VS = 3 to 5.5 V | 5 |
## CAD (KiCad official)
- Symbol: `INA220BQDGSRQ1`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files: `ina220bqdgsrq1-etched.step` / `ina220bqdgsrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina220bqdgsrq1.step` / `ina220bqdgsrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina220-q1.pdf) (39 pp, sha256 `b4d3bc69fbe2f11f`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina220bqdgsrq1-datasheet.pdf)