main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ina220bqdgsrq1: viewers · Ray
ina220bqdgsrq1-etched.glb Publish 0.1.0 · Ray
ina220bqdgsrq1-etched.step ina220bqdgsrq1: factory component page (tier=mfr) · Ray
ina220bqdgsrq1-hero.glb ina220bqdgsrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
ina220bqdgsrq1-hero.overlay.json Publish 0.1.0 · Ray
ina220bqdgsrq1.glb Publish 0.1.0 · Ray
ina220bqdgsrq1.kicad_mod Publish 0.1.0 · Ray
ina220bqdgsrq1.kicad_sym Publish 0.1.0 · Ray
ina220bqdgsrq1.lbr Publish 0.1.0 · Ray
ina220bqdgsrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

INA220BQDGSRQ1

Texas Instruments · Monitors & Reset Circuits · VSSOP-10-0.5mm

INA220BQDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A1 input Address pin; connect to GND, SCL, SDA, or VS to set the I2C address per Table 1.
2 A0 input Address pin; connect to GND, SCL, SDA, or VS to set the I2C address per Table 1.
3 NC unconnected No internal connection.
4 SDA bidirectional Serial bus data line (open-drain digital I/O).
5 SCL input Serial bus clock line.
6 VS power_in Analog power supply, 3 V to 5.5 V.
7 GND power_in Analog ground.
8 VBUS power_in Bus voltage input, rated -0.3 V to 26 V.
9 IN- input Negative differential shunt voltage input; connect to the negative side of the shunt resistor, and bus voltage is measured from this pin to ground.
10 IN+ input Positive differential shunt voltage input; connect to the positive side of the shunt resistor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-10-0.5mm
Category Power Supply Chip
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Bus voltage range 0 32 V BRNG = 1 5
Bus voltage range 0 16 V BRNG = 0 5
Common-mode rejection CMR 100 120 dB VIN+ = 0 to 26 V 5
Offset voltage, RTI VOS -50 10 50 µV PGA = /1 5
Offset voltage, RTI VOS -75 20 75 µV PGA = /2 5
Offset voltage, RTI VOS -75 30 75 µV PGA = /4 5
Offset voltage, RTI VOS -100 40 100 µV PGA = /8 5
IN+ pin input leakage -0.5 0.1 0.5 µA Power-down mode 5
IN- pin input leakage -0.5 0.1 0.5 µA Power-down mode 5
Current measurement error 0.2 0.3 % 5
Current measurement error 0.5 % TA = -40°C to 85°C 5
Bus voltage measurement error 0.2 0.5 % VBUS = 12 V 5
Bus voltage measurement error 1 % TA = -40°C to 85°C 5
ADC conversion time 532 586 µs 12-bit 5
ADC conversion time 276 304 µs 11-bit 5
ADC conversion time 148 163 µs 10-bit 5
ADC conversion time 84 93 µs 9-bit 5
SMBus timeout 28 35 ms 5
Leakage input current 0.1 1 µA 0 ≤ VIN ≤ VS 6
Input logic-level high VIH 6 V 6
Input logic-level low VIL -0.3 V 6
Logic 0 output level 0.15 0.4 V ISINK = 3 mA 6
High-level output leakage current 0.1 1 µA VOUT = VS 6
Operating supply range VS 3 5.5 V 6
Quiescent current IQ 0.7 1 mA 6
Quiescent current, power-down mode IQ 6 15 µA 6
Supply voltage VS 6 V 4
Differential input voltage VIN+ - VIN- -26 26 V IN+ to IN- 4
Common-mode input voltage VCM -0.3 26 V (VIN+ + VIN-) / 2 4
Voltage at VBUS pin VVBUS -0.3 26 V 4
Voltage at SDA pin VSDA 6 V 4
Input current into any pin 5 mA 4
Open-drain digital output current 10 mA 4
Operating temperature -40 125 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Ambient temperature TA -25 85 °C 4
Common-mode voltage VCM 12 V (VIN+ + VIN-) / 2 4
Supply voltage VS 3.3 V 4
Junction-to-ambient thermal resistance RθJA 165.4 °C/W DGS (10 pins) 4
Junction-to-case (top) thermal resistance RθJC(top) 53.2 °C/W DGS (10 pins) 4
Junction-to-board thermal resistance RθJB 86.6 °C/W DGS (10 pins) 4
Offset voltage drift 0.16 μV/°C TA = -40°C to 85°C 5
Offset voltage versus power supply, RTI PSRR 10 μV/V VS = 3 to 5.5 V 5

CAD (KiCad official)

  • Symbol: INA220BQDGSRQ1
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
  • 3D model files: ina220bqdgsrq1-etched.step / ina220bqdgsrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina220bqdgsrq1.step / ina220bqdgsrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 b4d3bc69fbe2f11f, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF