Generated by kicad-footprint-generator · KiCad file format 20260206
INA220AIDGSR
Texas Instruments · Current Sense Amplifiers · VSSOP-10-0.5mm
INA220AIDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | input | Address pin; connect to GND, SCL, SDA, or VS to configure device I²C address |
| 2 | A0 | input | Address pin; connect to GND, SCL, SDA, or VS to configure device I²C address |
| 3 | NC | unconnected | No internal connection |
| 4 | SDA | bidirectional | I²C serial data line with open-drain output |
| 5 | SCL | input | I²C serial clock input; voltage range GND - 0.3V to VS + 0.3V |
| 6 | VS | power_in | Analog power supply input; 3.3V to 5.5V recommended operating range |
| 7 | GND | power_in | Analog ground reference |
| 8 | VBUS | power_in | Bus voltage input; measures 0V to 26V with 4mV LSB resolution |
| 9 | IN- | input | Negative differential shunt voltage input; connect to negative side of shunt resistor |
| 10 | IN+ | input | Positive differential shunt voltage input; connect to positive side of shunt resistor |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VS | 6 | V | 5 | |||
| Analog inputs IN+, IN– differential voltage (VIN+) – (VIN–) | -26 | 26 | V | 5 | |||
| Analog inputs IN+, IN– common-mode voltage (VIN+ + VIN–) / 2 | -0.3 | 26 | V | 5 | |||
| Voltage at VBUS pin | VVBUS | -0.3 | 26 | V | 5 | ||
| Voltage at SDA pin | VSDA | 6 | V | 5 | |||
| Input current into any pin | 5 | mA | 5 | ||||
| Open-drain digital output current | 10 | mA | 5 | ||||
| Operating temperature | -40 | 125 | °C | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Ambient temperature (recommended operating) | TA | -40 | 85 | ºC | 5 | ||
| Full-scale current sense (input) voltage range | VSHUNT | 0 | 40 | mV | PGA = /1 | 6 | |
| Full-scale current sense (input) voltage range | VSHUNT | 0 | 80 | mV | PGA = /2 | 6 | |
| Full-scale current sense (input) voltage range | VSHUNT | 0 | 160 | mV | PGA = /4 | 6 | |
| Full-scale current sense (input) voltage range | VSHUNT | 0 | 320 | mV | PGA = /8 | 6 | |
| Bus voltage (input voltage) | 0 | 32 | V | BRNG = 1 | 6 | ||
| Bus voltage (input voltage) | 0 | 16 | V | BRNG = 0 | 6 | ||
| Common-mode rejection | 100 | 120 | dB | VIN+ = 0 to 26 V | 6 | ||
| Offset voltage, RTI | VOS | -100 | 10 | 100 | μV | PGA = /1 | 6 |
| Offset voltage, RTI | VOS | -125 | 20 | 125 | μV | PGA = /2 | 6 |
| Offset voltage, RTI | VOS | -150 | 30 | 150 | μV | PGA = /4 | 6 |
| Offset voltage, RTI | VOS | -200 | 40 | 200 | μV | PGA = /8 | 6 |
| Offset voltage, RTI versus temperature | 0.16 | μV/°C | TA = –40°C to 85°C | 6 | |||
| Versus power supply (PSRR) | 10 | μV/V | VS = 3 to 5.5 V | 6 | |||
| Current sense gain error | -40 | 40 | m% | 6 | |||
| Current sense gain error over temperature | 1 | m%/°C | TA = –40°C to 85°C | 6 | |||
| IN+ pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 6 | |
| IN– pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 6 | |
| Current measurement error | -0.5 | 0.2 | 0.5 | % | 6 | ||
| Current measurement error over temperature | -1 | 1 | % | TA = –40°C to 85°C | 6 | ||
| Bus voltage measurement error | -0.5 | 0.2 | 0.5 | % | VBUS = 12 V | 6 | |
| Bus voltage measurement error over temperature | -1 | 1 | % | TA = –40°C to 85°C | 6 | ||
| ADC conversion time, 12-bit | 532 | 586 | μs | 6 | |||
| ADC conversion time, 11-bit | 276 | 304 | μs | 6 | |||
| ADC conversion time, 10-bit | 148 | 163 | μs | 6 | |||
| ADC conversion time, 9-bit | 84 | 93 | μs | 6 | |||
| Minimum convert input low time | 4 | μs | 6 | ||||
| SMBus timeout | 28 | 35 | ms | 6 | |||
| Leakage input current | 0.1 | 1 | μA | 0 ≤ VIN ≤ VS | 7 | ||
| VIH input logic level | VIH | 6 | V | 7 | |||
| VIL input logic level | VIL | -0.3 | V | 7 | |||
| Logic 0 output level | 0.15 | 0.4 | V | ISINK = 3 mA | 7 | ||
| High-level output leakage current | 0.1 | 1 | μA | VOUT = VS | 7 | ||
| Operating supply range | VS | 3 | 5.5 | V | 7 | ||
| Quiescent current | IQ | 0.7 | 1 | mA | 7 | ||
| Quiescent current, power-down mode | IQ | 6 | 15 | μA | Power-down mode | 7 | |
| Junction-to-ambient thermal resistance | RθJA | 165.4 | °C/W | DGS (VSSOP) 10-pin | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 53.2 | °C/W | DGS (VSSOP) 10-pin | 5 | ||
| Junction-to-board thermal resistance | RθJB | 86.6 | °C/W | DGS (VSSOP) 10-pin | 5 | ||
| Junction-to-top characterization parameter | ψJT | 6.4 | °C/W | DGS (VSSOP) 10-pin | 5 | ||
| Junction-to-board characterization parameter | ψJB | 85 | °C/W | DGS (VSSOP) 10-pin | 5 |
CAD (KiCad official)
- Symbol:
INA220AIDGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ina220aidgsr-etched.step/ina220aidgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina220aidgsr.step/ina220aidgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
6ed0661ca2c6e0ef, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).