Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA220AIDGSR

Texas Instruments · Current Sense Amplifiers · VSSOP-10-0.5mm

INA220AIDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A1 input Address pin; connect to GND, SCL, SDA, or VS to configure device I²C address
2 A0 input Address pin; connect to GND, SCL, SDA, or VS to configure device I²C address
3 NC unconnected No internal connection
4 SDA bidirectional I²C serial data line with open-drain output
5 SCL input I²C serial clock input; voltage range GND - 0.3V to VS + 0.3V
6 VS power_in Analog power supply input; 3.3V to 5.5V recommended operating range
7 GND power_in Analog ground reference
8 VBUS power_in Bus voltage input; measures 0V to 26V with 4mV LSB resolution
9 IN- input Negative differential shunt voltage input; connect to negative side of shunt resistor
10 IN+ input Positive differential shunt voltage input; connect to positive side of shunt resistor

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-10-0.5mm
Category Amplifiers/Comparators
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VS 6 V 5
Analog inputs IN+, IN– differential voltage (VIN+) – (VIN–) -26 26 V 5
Analog inputs IN+, IN– common-mode voltage (VIN+ + VIN–) / 2 -0.3 26 V 5
Voltage at VBUS pin VVBUS -0.3 26 V 5
Voltage at SDA pin VSDA 6 V 5
Input current into any pin 5 mA 5
Open-drain digital output current 10 mA 5
Operating temperature -40 125 °C 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Ambient temperature (recommended operating) TA -40 85 ºC 5
Full-scale current sense (input) voltage range VSHUNT 0 40 mV PGA = /1 6
Full-scale current sense (input) voltage range VSHUNT 0 80 mV PGA = /2 6
Full-scale current sense (input) voltage range VSHUNT 0 160 mV PGA = /4 6
Full-scale current sense (input) voltage range VSHUNT 0 320 mV PGA = /8 6
Bus voltage (input voltage) 0 32 V BRNG = 1 6
Bus voltage (input voltage) 0 16 V BRNG = 0 6
Common-mode rejection 100 120 dB VIN+ = 0 to 26 V 6
Offset voltage, RTI VOS -100 10 100 μV PGA = /1 6
Offset voltage, RTI VOS -125 20 125 μV PGA = /2 6
Offset voltage, RTI VOS -150 30 150 μV PGA = /4 6
Offset voltage, RTI VOS -200 40 200 μV PGA = /8 6
Offset voltage, RTI versus temperature 0.16 μV/°C TA = –40°C to 85°C 6
Versus power supply (PSRR) 10 μV/V VS = 3 to 5.5 V 6
Current sense gain error -40 40 m% 6
Current sense gain error over temperature 1 m%/°C TA = –40°C to 85°C 6
IN+ pin input leakage -0.5 0.1 0.5 μA Power-down mode 6
IN– pin input leakage -0.5 0.1 0.5 μA Power-down mode 6
Current measurement error -0.5 0.2 0.5 % 6
Current measurement error over temperature -1 1 % TA = –40°C to 85°C 6
Bus voltage measurement error -0.5 0.2 0.5 % VBUS = 12 V 6
Bus voltage measurement error over temperature -1 1 % TA = –40°C to 85°C 6
ADC conversion time, 12-bit 532 586 μs 6
ADC conversion time, 11-bit 276 304 μs 6
ADC conversion time, 10-bit 148 163 μs 6
ADC conversion time, 9-bit 84 93 μs 6
Minimum convert input low time 4 μs 6
SMBus timeout 28 35 ms 6
Leakage input current 0.1 1 μA 0 ≤ VIN ≤ VS 7
VIH input logic level VIH 6 V 7
VIL input logic level VIL -0.3 V 7
Logic 0 output level 0.15 0.4 V ISINK = 3 mA 7
High-level output leakage current 0.1 1 μA VOUT = VS 7
Operating supply range VS 3 5.5 V 7
Quiescent current IQ 0.7 1 mA 7
Quiescent current, power-down mode IQ 6 15 μA Power-down mode 7
Junction-to-ambient thermal resistance RθJA 165.4 °C/W DGS (VSSOP) 10-pin 5
Junction-to-case (top) thermal resistance RθJC(top) 53.2 °C/W DGS (VSSOP) 10-pin 5
Junction-to-board thermal resistance RθJB 86.6 °C/W DGS (VSSOP) 10-pin 5
Junction-to-top characterization parameter ψJT 6.4 °C/W DGS (VSSOP) 10-pin 5
Junction-to-board characterization parameter ψJB 85 °C/W DGS (VSSOP) 10-pin 5

CAD (KiCad official)

  • Symbol: INA220AIDGSR
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
  • 3D model files: ina220aidgsr-etched.step / ina220aidgsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina220aidgsr.step / ina220aidgsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 6ed0661ca2c6e0ef, retrieved 2026-10-03, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF