Generated by kicad-footprint-generator · KiCad file format 20260206
INA219BIDCNT
Texas Instruments · Current Sense Amplifiers · SOT-23-8
INA219BIDCNT from Texas Instruments, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Positive differential shunt voltage input, differential voltage range -26 to +26 V maximum. |
| 2 | IN- | input | Negative differential shunt voltage input, common-mode voltage range -0.3 to 26 V maximum. |
| 3 | GND | power_in | Analog ground reference connection. |
| 4 | VS | power_in | Analog power supply voltage, operating range 3 to 5.5 V, absolute maximum 6 V. |
| 5 | SCL | input | Serial bus clock line for I²C/SMBus interface, voltage range GND-0.3 to VS+0.3 V maximum. |
| 6 | SDA | bidirectional | Serial bus data line for I²C/SMBus interface (open-drain output), voltage range GND-0.3 to 6 V maximum. |
| 7 | A0 | input | Address selection input pin for I²C slave address configuration, state sampled on every bus communication. |
| 8 | A1 | input | Address selection input pin for I²C slave address configuration, state sampled on every bus communication. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 6 | V | 4 | |||
| Differential input voltage | VIN+ – VIN– | -26 | 26 | V | 4 | ||
| Common-mode input voltage | (VIN+ + VIN–) / 2 | -0.3 | 26 | V | 4 | ||
| SDA pin voltage | 6 | V | 4 | ||||
| Input current into any pin | 5 | mA | 4 | ||||
| Open-drain digital output current | 10 | mA | 4 | ||||
| Operating temperature | -40 | 125 | °C | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Operating free-air temperature range | TA | -25 | 85 | °C | 4 | ||
| Operating supply range | 3 | 5.5 | V | 6 | |||
| Quiescent current | 0.7 | 1 | mA | 6 | |||
| Quiescent current, power-down mode | 6 | 15 | μA | 6 | |||
| Logic input high level | VIH | 6 | V | 5 | |||
| Logic input low level | VIL | -0.3 | V | 5 | |||
| Logic 0 output level | 0.15 | 0.4 | V | ISINK = 3 mA | 6 | ||
| High-level output leakage current | 0.1 | 1 | μA | VOUT = VS | 6 | ||
| Leakage input current | 0.1 | 1 | μA | 0 ≤ VIN ≤ VS | 5 | ||
| IN+ pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 5 | |
| IN– pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 5 | |
| Common-mode rejection | CMRR | 100 | 120 | dB | VIN+ = 0 to 26 V | 5 | |
| Offset voltage, RTI (INA219B) | VOS | -50 | 50 | μV | PGA = /1 | 5 | |
| Current sense gain error (INA219B) | -40 | 40 | m% | 5 | |||
| Current measurement error (INA219B) | -0.3 | 0.3 | % | 5 | |||
| Current measurement error over temperature (INA219B) | -0.5 | 0.5 | % | TA = –25°C to 85°C | 5 | ||
| Bus voltage measurement error (INA219B) | -0.5 | 0.5 | % | 5 | |||
| Bus voltage measurement error over temperature (INA219B) | -1 | 1 | % | TA = –25°C to 85°C | 5 | ||
| SMBus timeout | 28 | 35 | ms | 5 | |||
| SCL operating frequency | ƒ(SCL) | 0.001 | 0.4 | MHz | Fast mode | 6 | |
| SCL operating frequency | ƒ(SCL) | 0.001 | 2.56 | MHz | High-speed mode | 6 | |
| Bus free time between STOP and START condition | t(BUF) | 1300 | ns | Fast mode | 6 | ||
| Bus free time between STOP and START condition | t(BUF) | 160 | ns | High-speed mode | 6 | ||
| Hold time after repeated START condition | t(HDSTA) | 600 | ns | Fast mode | 6 | ||
| Hold time after repeated START condition | t(HDSTA) | 160 | ns | High-speed mode | 6 | ||
| Repeated START condition setup time | t(SUSTA) | 600 | ns | Fast mode | 6 | ||
| Repeated START condition setup time | t(SUSTA) | 160 | ns | High-speed mode | 6 | ||
| STOP condition setup time | t(SUSTO) | 600 | ns | Fast mode | 6 | ||
| STOP condition setup time | t(SUSTO) | 160 | ns | High-speed mode | 6 | ||
| Data hold time | t(HDDAT) | 0 | 900 | ns | Fast mode | 6 | |
| Data hold time | t(HDDAT) | 0 | 90 | ns | High-speed mode | 6 | |
| Data setup time | t(SUDAT) | 100 | ns | Fast mode | 6 | ||
| Data setup time | t(SUDAT) | 10 | ns | High-speed mode | 6 | ||
| SCL clock LOW period | t(LOW) | 1300 | ns | Fast mode | 6 | ||
| SCL clock LOW period | t(LOW) | 250 | ns | High-speed mode | 6 | ||
| SCL clock HIGH period | t(HIGH) | 600 | ns | Fast mode | 6 | ||
| SCL clock HIGH period | t(HIGH) | 60 | ns | High-speed mode | 6 | ||
| Data fall time | tF DA | 300 | ns | Fast mode | 6 | ||
| Data fall time | tF DA | 150 | ns | High-speed mode | 6 | ||
| Supply voltage (recommended) | VS | 3.3 | V | 4 | |||
| Common-mode input voltage (recommended) | VCM | 12 | V | 4 | |||
| Power-on reset threshold | 2 | V | 6 | ||||
| Junction-to-ambient thermal resistance (DCN, SOT-23-8) | RθJA | 135.4 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DCN, SOT-23-8) | RθJC(top) | 68.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DCN, SOT-23-8) | RθJB | 48.9 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DCN, SOT-23-8) | ψJT | 9.9 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DCN, SOT-23-8) | ψJB | 48.4 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
INA219BIDCNT - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: SOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina219bidcnt-etched.step/ina219bidcnt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina219bidcnt.step/ina219bidcnt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
2c973858ed829073, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).