Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA219BIDCNT

Texas Instruments · Current Sense Amplifiers · SOT-23-8

INA219BIDCNT from Texas Instruments, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Positive differential shunt voltage input, differential voltage range -26 to +26 V maximum.
2 IN- input Negative differential shunt voltage input, common-mode voltage range -0.3 to 26 V maximum.
3 GND power_in Analog ground reference connection.
4 VS power_in Analog power supply voltage, operating range 3 to 5.5 V, absolute maximum 6 V.
5 SCL input Serial bus clock line for I²C/SMBus interface, voltage range GND-0.3 to VS+0.3 V maximum.
6 SDA bidirectional Serial bus data line for I²C/SMBus interface (open-drain output), voltage range GND-0.3 to 6 V maximum.
7 A0 input Address selection input pin for I²C slave address configuration, state sampled on every bus communication.
8 A1 input Address selection input pin for I²C slave address configuration, state sampled on every bus communication.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 6 V 4
Differential input voltage VIN+ – VIN– -26 26 V 4
Common-mode input voltage (VIN+ + VIN–) / 2 -0.3 26 V 4
SDA pin voltage 6 V 4
Input current into any pin 5 mA 4
Open-drain digital output current 10 mA 4
Operating temperature -40 125 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Operating free-air temperature range TA -25 85 °C 4
Operating supply range 3 5.5 V 6
Quiescent current 0.7 1 mA 6
Quiescent current, power-down mode 6 15 μA 6
Logic input high level VIH 6 V 5
Logic input low level VIL -0.3 V 5
Logic 0 output level 0.15 0.4 V ISINK = 3 mA 6
High-level output leakage current 0.1 1 μA VOUT = VS 6
Leakage input current 0.1 1 μA 0 ≤ VIN ≤ VS 5
IN+ pin input leakage -0.5 0.1 0.5 μA Power-down mode 5
IN– pin input leakage -0.5 0.1 0.5 μA Power-down mode 5
Common-mode rejection CMRR 100 120 dB VIN+ = 0 to 26 V 5
Offset voltage, RTI (INA219B) VOS -50 50 μV PGA = /1 5
Current sense gain error (INA219B) -40 40 m% 5
Current measurement error (INA219B) -0.3 0.3 % 5
Current measurement error over temperature (INA219B) -0.5 0.5 % TA = –25°C to 85°C 5
Bus voltage measurement error (INA219B) -0.5 0.5 % 5
Bus voltage measurement error over temperature (INA219B) -1 1 % TA = –25°C to 85°C 5
SMBus timeout 28 35 ms 5
SCL operating frequency ƒ(SCL) 0.001 0.4 MHz Fast mode 6
SCL operating frequency ƒ(SCL) 0.001 2.56 MHz High-speed mode 6
Bus free time between STOP and START condition t(BUF) 1300 ns Fast mode 6
Bus free time between STOP and START condition t(BUF) 160 ns High-speed mode 6
Hold time after repeated START condition t(HDSTA) 600 ns Fast mode 6
Hold time after repeated START condition t(HDSTA) 160 ns High-speed mode 6
Repeated START condition setup time t(SUSTA) 600 ns Fast mode 6
Repeated START condition setup time t(SUSTA) 160 ns High-speed mode 6
STOP condition setup time t(SUSTO) 600 ns Fast mode 6
STOP condition setup time t(SUSTO) 160 ns High-speed mode 6
Data hold time t(HDDAT) 0 900 ns Fast mode 6
Data hold time t(HDDAT) 0 90 ns High-speed mode 6
Data setup time t(SUDAT) 100 ns Fast mode 6
Data setup time t(SUDAT) 10 ns High-speed mode 6
SCL clock LOW period t(LOW) 1300 ns Fast mode 6
SCL clock LOW period t(LOW) 250 ns High-speed mode 6
SCL clock HIGH period t(HIGH) 600 ns Fast mode 6
SCL clock HIGH period t(HIGH) 60 ns High-speed mode 6
Data fall time tF DA 300 ns Fast mode 6
Data fall time tF DA 150 ns High-speed mode 6
Supply voltage (recommended) VS 3.3 V 4
Common-mode input voltage (recommended) VCM 12 V 4
Power-on reset threshold 2 V 6
Junction-to-ambient thermal resistance (DCN, SOT-23-8) RθJA 135.4 °C/W 4
Junction-to-case (top) thermal resistance (DCN, SOT-23-8) RθJC(top) 68.1 °C/W 4
Junction-to-board thermal resistance (DCN, SOT-23-8) RθJB 48.9 °C/W 4
Junction-to-top characterization parameter (DCN, SOT-23-8) ψJT 9.9 °C/W 4
Junction-to-board characterization parameter (DCN, SOT-23-8) ψJB 48.4 °C/W 4

CAD (KiCad official)

  • Symbol: INA219BIDCNT
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ina219bidcnt-etched.step / ina219bidcnt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina219bidcnt.step / ina219bidcnt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 2c973858ed829073, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF