main
History Download
Ray Publish 0.1.0 50b944f

INA219BID

Texas Instruments · Current Sense Amplifiers · SOIC-8

INA219BID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A1 input Address pin A1; Table 1 on the datasheet gives the pin settings and corresponding I2C addresses.
2 A0 input Address pin A0; Table 1 on the datasheet gives the pin settings and corresponding I2C addresses.
3 SDA bidirectional Serial bus data line, I/O for the I2C or SMBus interface.
4 SCL input Serial bus clock line input for the I2C or SMBus interface.
5 VS power_in Analog power supply, 3 to 5.5 V.
6 GND power_in Analog ground.
7 IN- input Negative differential shunt voltage input; connect to the negative side of the shunt resistor, and the bus voltage is measured from this pin to ground.
8 IN+ input Positive differential shunt voltage input; connect to the positive side of the shunt resistor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 6 V 4
Analog inputs differential (VIN+, VIN-) -26 26 V Differential (VIN+, VIN-) 4
Analog inputs common-mode IN+, IN- (VIN+ + VIN-)/2 -0.3 26 V Common-mode 4
SDA voltage -0.3 6 V relative to GND 4
SCL voltage -0.3 V relative to GND; max VS + 0.3 V 4
Input current into any pin 5 mA 4
Open-drain digital output current 10 mA 4
Operating temperature -40 125 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input voltage VCM 12 V 4
Supply voltage VS 3.3 V 4
Operating free-air temperature TA -25 85 °C 4
Junction-to-ambient thermal resistance (D SOIC) RθJA 111.3 °C/W 4
Junction-to-case (top) thermal resistance (D SOIC) RθJC(top) 55.9 °C/W 4
Junction-to-board thermal resistance (D SOIC) RθJB 52 °C/W 4
Junction-to-top characterization parameter (D SOIC) ψJT 10.7 °C/W 4
Junction-to-board characterization parameter (D SOIC) ψJB 51.5 °C/W 4
Full-scale current sense (input) voltage VSHUNT -40 40 mV PGA = /1 5
Full-scale current sense (input) voltage VSHUNT -80 80 mV PGA = /2 5
Full-scale current sense (input) voltage VSHUNT -160 160 mV PGA = /4 5
Full-scale current sense (input) voltage VSHUNT -320 320 mV PGA = /8 5
Bus voltage (input voltage) range 0 32 V BRNG = 1 5
Bus voltage (input voltage) range 0 16 V BRNG = 0 5
Common-mode rejection CMRR 100 120 dB VIN+ = 0 to 26 V 5
Offset voltage, RTI VOS -50 10 50 μV PGA = /1 5
Offset voltage, RTI VOS -75 20 75 μV PGA = /2 5
Offset voltage, RTI VOS -75 30 75 μV PGA = /4 5
Offset voltage, RTI VOS -100 40 100 μV PGA = /8 5
Offset voltage vs temperature VOS 0.1 μV/°C TA = -25°C to 85°C 5
PSRR vs power supply PSRR 10 μV/V VS = 3 to 5.5 V 5
Current sense gain error -40 40 m% 5
Current sense gain error vs temperature 1 m%/°C TA = -25°C to 85°C 5
IN+ pin input leakage -0.5 0.1 0.5 μA Power-down mode 5
IN- pin input leakage -0.5 0.1 0.5 μA Power-down mode 5
Current measurement error -0.3 0.2 0.3 % 5
Current measurement error over temperature -0.5 0.5 % TA = -25°C to 85°C 5
Bus voltage measurement error -0.5 0.2 0.5 % 5
Bus voltage measurement error over temperature -1 1 % TA = -25°C to 85°C 5
Differential nonlinearity DNL -0.1 0.1 LSB 5
ADC conversion time 12 bit 532 586 μs 12 bit 5
ADC conversion time 11 bit 276 304 μs 11 bit 5
ADC conversion time 10 bit 148 163 μs 10 bit 5
ADC conversion time 9 bit 84 93 μs 9 bit 5
SMBus timeout 28 35 ms 5
Input capacitance 3 pF 5
Leakage input current 0.1 1 μA 0 ≤ VIN ≤ VS 5
VIH input logic level VIH 6 V minimum 0.7 (VS) 5
VIL input logic level VIL -0.3 V maximum 0.3 (VS) 5
Logic 0 output level VOL 0.15 0.4 V ISINK = 3 mA 6
High-level output leakage current 0.1 1 μA VOUT = VS 6
Operating supply range VS 3 5.5 V 6
Quiescent current IQ 0.7 1 mA 6
Quiescent current, power-down mode IQ 6 15 μA power-down mode 6
Power-on reset threshold 2 V 6
SCL operating frequency ƒ(SCL) 0.001 0.4 MHz Fast mode 6
SCL operating frequency ƒ(SCL) 0.001 2.56 MHz High-speed mode 6
Bus free time between STOP and START t(BUF) 1300 ns Fast mode 6
Bus free time between STOP and START t(BUF) 160 ns High-speed mode 6

CAD (KiCad official)

  • Symbol: INA219BID
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ina219bid-etched.step / ina219bid-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina219bid.step / ina219bid.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 58004eda854d0747, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF