3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA219BID
Texas Instruments · Current Sense Amplifiers · SOIC-8
INA219BID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | input | Address pin A1; Table 1 on the datasheet gives the pin settings and corresponding I2C addresses. |
| 2 | A0 | input | Address pin A0; Table 1 on the datasheet gives the pin settings and corresponding I2C addresses. |
| 3 | SDA | bidirectional | Serial bus data line, I/O for the I2C or SMBus interface. |
| 4 | SCL | input | Serial bus clock line input for the I2C or SMBus interface. |
| 5 | VS | power_in | Analog power supply, 3 to 5.5 V. |
| 6 | GND | power_in | Analog ground. |
| 7 | IN- | input | Negative differential shunt voltage input; connect to the negative side of the shunt resistor, and the bus voltage is measured from this pin to ground. |
| 8 | IN+ | input | Positive differential shunt voltage input; connect to the positive side of the shunt resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 6 | V | 4 | |||
| Analog inputs differential (VIN+, VIN-) | -26 | 26 | V | Differential (VIN+, VIN-) | 4 | ||
| Analog inputs common-mode IN+, IN- | (VIN+ + VIN-)/2 | -0.3 | 26 | V | Common-mode | 4 | |
| SDA voltage | -0.3 | 6 | V | relative to GND | 4 | ||
| SCL voltage | -0.3 | V | relative to GND; max VS + 0.3 V | 4 | |||
| Input current into any pin | 5 | mA | 4 | ||||
| Open-drain digital output current | 10 | mA | 4 | ||||
| Operating temperature | -40 | 125 | °C | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input voltage | VCM | 12 | V | 4 | |||
| Supply voltage | VS | 3.3 | V | 4 | |||
| Operating free-air temperature | TA | -25 | 85 | °C | 4 | ||
| Junction-to-ambient thermal resistance (D SOIC) | RθJA | 111.3 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (D SOIC) | RθJC(top) | 55.9 | °C/W | 4 | |||
| Junction-to-board thermal resistance (D SOIC) | RθJB | 52 | °C/W | 4 | |||
| Junction-to-top characterization parameter (D SOIC) | ψJT | 10.7 | °C/W | 4 | |||
| Junction-to-board characterization parameter (D SOIC) | ψJB | 51.5 | °C/W | 4 | |||
| Full-scale current sense (input) voltage | VSHUNT | -40 | 40 | mV | PGA = /1 | 5 | |
| Full-scale current sense (input) voltage | VSHUNT | -80 | 80 | mV | PGA = /2 | 5 | |
| Full-scale current sense (input) voltage | VSHUNT | -160 | 160 | mV | PGA = /4 | 5 | |
| Full-scale current sense (input) voltage | VSHUNT | -320 | 320 | mV | PGA = /8 | 5 | |
| Bus voltage (input voltage) range | 0 | 32 | V | BRNG = 1 | 5 | ||
| Bus voltage (input voltage) range | 0 | 16 | V | BRNG = 0 | 5 | ||
| Common-mode rejection | CMRR | 100 | 120 | dB | VIN+ = 0 to 26 V | 5 | |
| Offset voltage, RTI | VOS | -50 | 10 | 50 | μV | PGA = /1 | 5 |
| Offset voltage, RTI | VOS | -75 | 20 | 75 | μV | PGA = /2 | 5 |
| Offset voltage, RTI | VOS | -75 | 30 | 75 | μV | PGA = /4 | 5 |
| Offset voltage, RTI | VOS | -100 | 40 | 100 | μV | PGA = /8 | 5 |
| Offset voltage vs temperature | VOS | 0.1 | μV/°C | TA = -25°C to 85°C | 5 | ||
| PSRR vs power supply | PSRR | 10 | μV/V | VS = 3 to 5.5 V | 5 | ||
| Current sense gain error | -40 | 40 | m% | 5 | |||
| Current sense gain error vs temperature | 1 | m%/°C | TA = -25°C to 85°C | 5 | |||
| IN+ pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 5 | |
| IN- pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 5 | |
| Current measurement error | -0.3 | 0.2 | 0.3 | % | 5 | ||
| Current measurement error over temperature | -0.5 | 0.5 | % | TA = -25°C to 85°C | 5 | ||
| Bus voltage measurement error | -0.5 | 0.2 | 0.5 | % | 5 | ||
| Bus voltage measurement error over temperature | -1 | 1 | % | TA = -25°C to 85°C | 5 | ||
| Differential nonlinearity | DNL | -0.1 | 0.1 | LSB | 5 | ||
| ADC conversion time 12 bit | 532 | 586 | μs | 12 bit | 5 | ||
| ADC conversion time 11 bit | 276 | 304 | μs | 11 bit | 5 | ||
| ADC conversion time 10 bit | 148 | 163 | μs | 10 bit | 5 | ||
| ADC conversion time 9 bit | 84 | 93 | μs | 9 bit | 5 | ||
| SMBus timeout | 28 | 35 | ms | 5 | |||
| Input capacitance | 3 | pF | 5 | ||||
| Leakage input current | 0.1 | 1 | μA | 0 ≤ VIN ≤ VS | 5 | ||
| VIH input logic level | VIH | 6 | V | minimum 0.7 (VS) | 5 | ||
| VIL input logic level | VIL | -0.3 | V | maximum 0.3 (VS) | 5 | ||
| Logic 0 output level | VOL | 0.15 | 0.4 | V | ISINK = 3 mA | 6 | |
| High-level output leakage current | 0.1 | 1 | μA | VOUT = VS | 6 | ||
| Operating supply range | VS | 3 | 5.5 | V | 6 | ||
| Quiescent current | IQ | 0.7 | 1 | mA | 6 | ||
| Quiescent current, power-down mode | IQ | 6 | 15 | μA | power-down mode | 6 | |
| Power-on reset threshold | 2 | V | 6 | ||||
| SCL operating frequency | ƒ(SCL) | 0.001 | 0.4 | MHz | Fast mode | 6 | |
| SCL operating frequency | ƒ(SCL) | 0.001 | 2.56 | MHz | High-speed mode | 6 | |
| Bus free time between STOP and START | t(BUF) | 1300 | ns | Fast mode | 6 | ||
| Bus free time between STOP and START | t(BUF) | 160 | ns | High-speed mode | 6 |
CAD (KiCad official)
- Symbol:
INA219BID - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina219bid-etched.step/ina219bid-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina219bid.step/ina219bid.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
58004eda854d0747, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).