main
Ray ina214aqdckrq1: specified limits as data (metadata.characteristics, 38 rows from the datasheet) 5fa1dd9

INA214AQDCKRQ1

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA214AQDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input that sets the output bias point; accepts voltage from 0V to V+.
2 GND power_in Ground connection for the device.
3 V+ power_in Power supply input; operating range 2.7V to 26V.
4 IN+ input Non-inverting input connected to the supply side of the shunt resistor for differential current measurement.
5 IN- input Inverting input connected to the load side of the shunt resistor for differential current measurement.
6 OUT output Analog output voltage representing the amplified differential voltage across the shunt resistor with 100V/V gain.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (recommended) VS 2.7 26 V 4
Junction temperature (recommended) TJ -40 125 °C 4
Supply voltage (absolute maximum) VS 28 V VS is the voltage on V+ pin 4
Differential input voltage (absolute maximum) VDIF -28 28 V VDIF = (VIN+) – (VIN–) 4
Common-mode input voltage (absolute maximum, version A) VIN -0.3 28 V Common mode, version A; printed as GND – 0.3 to 28 4
REF input voltage (absolute maximum) VREF -0.3 V Printed as GND – 0.3 to (VS) + 0.3; upper limit is VS + 0.3 V, not a numeric value 4
Output voltage (absolute maximum) VOUT -0.3 V Printed as GND – 0.3 to (VS) + 0.3; upper limit is VS + 0.3 V, not a numeric value 4
Input current into any pin (absolute maximum) IIN 5 mA 4
Operating temperature (absolute maximum) TA -40 125 °C Ambient, natural convection 4
Junction temperature (absolute maximum) TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD human body model (HBM) V(ESD) -2000 2000 V AEC Q100-002, version A; printed as ±2000 4
ESD charged device model (CDM) V(ESD) -1000 1000 V AEC Q100-011, version A; printed as ±1000 4
Common-mode input voltage VCM VCM -0.3 26 V Version A, TA = –40°C to 125°C 5
Common-mode rejection ratio CMRR CMRR 105 140 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = –40°C to 125°C; INA214-Q1 row 5
Input offset voltage, RTI VOS -60 1 60 µV VSENSE = 0mV, TA = 25°C; INA214-Q1 row 5
Offset voltage drift vs temperature dVOS/dT 0.1 0.5 µV/°C TA = –40°C to 125°C 5
Offset voltage vs power supply (PSR) PSR -10 0.1 10 µV/V VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV, TA = 25°C 5
Input bias current IB 15 28 35 µA VSENSE = 0mV, TA = 25°C 5
Input offset current IOS -0.02 0.02 0.02 µA VSENSE = 0mV, TA = 25°C 5
Gain G 100 V/V INA214-Q1 gain 6
Gain error Gain error -1 0.02 1 % VSENSE = –5mV to 5mV, TA = –40°C to 125°C; version A and B; typ printed ±0.02%, max ±1% 6
Gain error drift vs temperature Gain drift 3 10 ppm/°C TA = –40°C to 125°C 6
Nonlinearity error Nonlinearity -0.01 0.01 0.01 % TA = 25°C 6
Maximum capacitive load CLOAD 1 nF No sustained oscillation, TA = 25°C 6
Output voltage swing to V+ supply rail VOUT -0.05 -0.2 V Relative to V+; RL = 10kΩ to GND, TA = –40°C to 125°C; printed as (V+)-0.05 and (V+)-0.2 6
Output voltage swing to GND VOUT 0.005 0.05 V Relative to GND, TA = –40°C to 125°C; printed as (VGND)+0.005 and (VGND)+0.05 6
Bandwidth BW 30 kHz CLOAD = 10pF, TA = 25°C; INA214-Q1 row 6
Slew rate SR 0.4 V/µs TA = 25°C 6
Voltage noise density, RTI en 25 nV/√Hz TA = 25°C 6
Quiescent current IQ IQ 65 100 µA VSENSE = 0mV, TA = 25°C 6
Quiescent current IQ over temperature IQ 115 µA VSENSE = 0mV, TA = –40°C to 125°C 6
Junction-to-ambient thermal resistance RθJA 227.3 °C/W DCK (SC70) 6-pin 5
Junction-to-case (top) thermal resistance RθJC(top) 79.5 °C/W DCK (SC70) 6-pin 5
Junction-to-board thermal resistance RθJB 72.1 °C/W DCK (SC70) 6-pin 5
Junction-to-top characterization parameter ψJT 3.6 °C/W DCK (SC70) 6-pin 5
Junction-to-board characterization parameter ψJB 70.4 °C/W DCK (SC70) 6-pin 5
Common-mode input voltage (recommended) VCM 12 V Printed as a single value in the recommended table 4

CAD (KiCad official)

  • Symbol: INA214AQDCKRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina214aqdckrq1-etched.step / ina214aqdckrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina214aqdckrq1.step / ina214aqdckrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 5cde67aed07e0e83, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF