3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA214AQDCKRQ1
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA214AQDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input that sets the output bias point; accepts voltage from 0V to V+. |
| 2 | GND | power_in | Ground connection for the device. |
| 3 | V+ | power_in | Power supply input; operating range 2.7V to 26V. |
| 4 | IN+ | input | Non-inverting input connected to the supply side of the shunt resistor for differential current measurement. |
| 5 | IN- | input | Inverting input connected to the load side of the shunt resistor for differential current measurement. |
| 6 | OUT | output | Analog output voltage representing the amplified differential voltage across the shunt resistor with 100V/V gain. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (recommended) | VS | 2.7 | 26 | V | 4 | ||
| Junction temperature (recommended) | TJ | -40 | 125 | °C | 4 | ||
| Supply voltage (absolute maximum) | VS | 28 | V | VS is the voltage on V+ pin | 4 | ||
| Differential input voltage (absolute maximum) | VDIF | -28 | 28 | V | VDIF = (VIN+) – (VIN–) | 4 | |
| Common-mode input voltage (absolute maximum, version A) | VIN | -0.3 | 28 | V | Common mode, version A; printed as GND – 0.3 to 28 | 4 | |
| REF input voltage (absolute maximum) | VREF | -0.3 | V | Printed as GND – 0.3 to (VS) + 0.3; upper limit is VS + 0.3 V, not a numeric value | 4 | ||
| Output voltage (absolute maximum) | VOUT | -0.3 | V | Printed as GND – 0.3 to (VS) + 0.3; upper limit is VS + 0.3 V, not a numeric value | 4 | ||
| Input current into any pin (absolute maximum) | IIN | 5 | mA | 4 | |||
| Operating temperature (absolute maximum) | TA | -40 | 125 | °C | Ambient, natural convection | 4 | |
| Junction temperature (absolute maximum) | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human body model (HBM) | V(ESD) | -2000 | 2000 | V | AEC Q100-002, version A; printed as ±2000 | 4 | |
| ESD charged device model (CDM) | V(ESD) | -1000 | 1000 | V | AEC Q100-011, version A; printed as ±1000 | 4 | |
| Common-mode input voltage VCM | VCM | -0.3 | 26 | V | Version A, TA = –40°C to 125°C | 5 | |
| Common-mode rejection ratio CMRR | CMRR | 105 | 140 | dB | VIN+ = 0V to 26V, VSENSE = 0mV, TA = –40°C to 125°C; INA214-Q1 row | 5 | |
| Input offset voltage, RTI | VOS | -60 | 1 | 60 | µV | VSENSE = 0mV, TA = 25°C; INA214-Q1 row | 5 |
| Offset voltage drift vs temperature | dVOS/dT | 0.1 | 0.5 | µV/°C | TA = –40°C to 125°C | 5 | |
| Offset voltage vs power supply (PSR) | PSR | -10 | 0.1 | 10 | µV/V | VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV, TA = 25°C | 5 |
| Input bias current | IB | 15 | 28 | 35 | µA | VSENSE = 0mV, TA = 25°C | 5 |
| Input offset current | IOS | -0.02 | 0.02 | 0.02 | µA | VSENSE = 0mV, TA = 25°C | 5 |
| Gain | G | 100 | V/V | INA214-Q1 gain | 6 | ||
| Gain error | Gain error | -1 | 0.02 | 1 | % | VSENSE = –5mV to 5mV, TA = –40°C to 125°C; version A and B; typ printed ±0.02%, max ±1% | 6 |
| Gain error drift vs temperature | Gain drift | 3 | 10 | ppm/°C | TA = –40°C to 125°C | 6 | |
| Nonlinearity error | Nonlinearity | -0.01 | 0.01 | 0.01 | % | TA = 25°C | 6 |
| Maximum capacitive load | CLOAD | 1 | nF | No sustained oscillation, TA = 25°C | 6 | ||
| Output voltage swing to V+ supply rail | VOUT | -0.05 | -0.2 | V | Relative to V+; RL = 10kΩ to GND, TA = –40°C to 125°C; printed as (V+)-0.05 and (V+)-0.2 | 6 | |
| Output voltage swing to GND | VOUT | 0.005 | 0.05 | V | Relative to GND, TA = –40°C to 125°C; printed as (VGND)+0.005 and (VGND)+0.05 | 6 | |
| Bandwidth | BW | 30 | kHz | CLOAD = 10pF, TA = 25°C; INA214-Q1 row | 6 | ||
| Slew rate | SR | 0.4 | V/µs | TA = 25°C | 6 | ||
| Voltage noise density, RTI | en | 25 | nV/√Hz | TA = 25°C | 6 | ||
| Quiescent current IQ | IQ | 65 | 100 | µA | VSENSE = 0mV, TA = 25°C | 6 | |
| Quiescent current IQ over temperature | IQ | 115 | µA | VSENSE = 0mV, TA = –40°C to 125°C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 227.3 | °C/W | DCK (SC70) 6-pin | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 79.5 | °C/W | DCK (SC70) 6-pin | 5 | ||
| Junction-to-board thermal resistance | RθJB | 72.1 | °C/W | DCK (SC70) 6-pin | 5 | ||
| Junction-to-top characterization parameter | ψJT | 3.6 | °C/W | DCK (SC70) 6-pin | 5 | ||
| Junction-to-board characterization parameter | ψJB | 70.4 | °C/W | DCK (SC70) 6-pin | 5 | ||
| Common-mode input voltage (recommended) | VCM | 12 | V | Printed as a single value in the recommended table | 4 |
CAD (KiCad official)
- Symbol:
INA214AQDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina214aqdckrq1-etched.step/ina214aqdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina214aqdckrq1.step/ina214aqdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
5cde67aed07e0e83, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).