main
History Download
Ray ina214aidckr: specified limits as data (metadata.characteristics, 28 rows from the datasheet) bf17301

INA214AIDCKR

Texas Instruments · Current Sense Amplifiers · SOT-363(SC-70-6)

INA214AIDCKR from Texas Instruments, in a SOT-363(SC-70-6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input (0V to V+) that sets the output DC offset point for zero differential input.
2 GND power_in Analog ground reference point.
3 V+ power_in Positive power supply input, operating range 2.7V to 26V.
4 IN+ input Positive shunt sense input connected to power supply side of shunt resistor, common-mode range −0.3V to 26V.
5 IN− input Negative shunt sense input connected to load side of shunt resistor, common-mode range −0.3V to 26V.
6 OUT output Analog output voltage with output swing from (VGND)+0.005V to (V+)−0.05V minimum at RL=10kΩ load.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-363(SC-70-6)
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input voltage range (version A) VCM -0.3 26 V TA = –40°C 至 +125°C 7
CMRR, common-mode rejection ratio (INA214) CMRR 105 140 dB VIN+ = 0V 至 26V,VSENSE = 0mV,TA = –40°C 至 +125°C 7
Input offset voltage, RTI (INA214) VO -60 1 60 µV VSENSE = 0mV 7
Offset voltage drift vs temperature, RTI dVOS/dT 0.1 0.5 µV/°C VSENSE = 0mV,TA = –40°C 至 +125°C 7
PSRR, power-supply rejection ratio, RTI PSRR -10 0.1 10 µV/V VS = 2.7V 至 18V,VIN+ = 18V,VSENSE = 0mV 7
Input bias current IIB 15 28 35 µA VSENSE = 0mV 7
Input offset current IIO -0.02 0.02 µA VSENSE = 0mV 7
Gain error (version A) EG -1 0.02 1 % VSENSE = –5mV 至 5mV,TA = –40°C 至 +125°C(版本 A 和 B) 7
Gain error drift vs temperature 3 10 ppm/°C TA = -40°C 至 +125°C 7
Nonlinearity error -0.01 0.01 % VSENSE = -5mV 至 5mV 7
Maximum capacitive load 1 nF 无持续振荡 7
Output swing relative to V+ rail -0.05 -0.2 V RL = 10kΩ 至 GND,TA = –40°C 至 +125°C(相对于 V+) 7
Output swing to GND 0.005 0.05 V RL = 10kΩ 至 GND,TA = –40°C 至 +125°C(相对于 GND) 7
Gain (INA214) G 100 V/V 7
Bandwidth (INA214) BW 30 kHz CLOAD = 10pF 7
Slew rate SR 0.4 V/µs 8
Voltage noise density, RTI 25 nV/√Hz 8
Supply voltage range VS 2.7 26 V TA = –40°C 至 +125°C 8
Quiescent current IQ 65 100 µA VSENSE = 0mV 8
Quiescent current over operating temperature range IQ 115 µA TA = -40°C 至 +125°C 8
Specified temperature range -40 125 °C 8
Operating temperature range -55 150 °C 8
Thermal resistance, junction-to-ambient (SC70, electrical table) θJA 250 °C/W SC70 package 8
Thermal resistance, junction-to-ambient (DCK, SC70-6) RθJA 227.3 °C/W DCK (SC70) 6-pin 6
Thermal resistance, junction-to-case (top) RθJC(top) 79.5 °C/W DCK (SC70) 6-pin 6
Thermal resistance, junction-to-board RθJB 72.1 °C/W DCK (SC70) 6-pin 6
Junction-to-top characterization parameter ψJT 3.6 °C/W DCK (SC70) 6-pin 6
Junction-to-board characterization parameter ψJB 70.4 °C/W DCK (SC70) 6-pin 6

CAD (KiCad official)

  • Symbol: INA214AIDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SOT-363(SC-70-6) (KiCad packages3D, STEP)
  • 3D model files: ina214aidckr-etched.step / ina214aidckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina214aidckr.step / ina214aidckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 8bce21ab869b5599, retrieved 2026-09-21, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF