3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA214AIDCKR
Texas Instruments · Current Sense Amplifiers · SOT-363(SC-70-6)
INA214AIDCKR from Texas Instruments, in a SOT-363(SC-70-6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input (0V to V+) that sets the output DC offset point for zero differential input. |
| 2 | GND | power_in | Analog ground reference point. |
| 3 | V+ | power_in | Positive power supply input, operating range 2.7V to 26V. |
| 4 | IN+ | input | Positive shunt sense input connected to power supply side of shunt resistor, common-mode range −0.3V to 26V. |
| 5 | IN− | input | Negative shunt sense input connected to load side of shunt resistor, common-mode range −0.3V to 26V. |
| 6 | OUT | output | Analog output voltage with output swing from (VGND)+0.005V to (V+)−0.05V minimum at RL=10kΩ load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-363(SC-70-6) |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage range (version A) | VCM | -0.3 | 26 | V | TA = –40°C 至 +125°C | 7 | |
| CMRR, common-mode rejection ratio (INA214) | CMRR | 105 | 140 | dB | VIN+ = 0V 至 26V,VSENSE = 0mV,TA = –40°C 至 +125°C | 7 | |
| Input offset voltage, RTI (INA214) | VO | -60 | 1 | 60 | µV | VSENSE = 0mV | 7 |
| Offset voltage drift vs temperature, RTI | dVOS/dT | 0.1 | 0.5 | µV/°C | VSENSE = 0mV,TA = –40°C 至 +125°C | 7 | |
| PSRR, power-supply rejection ratio, RTI | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7V 至 18V,VIN+ = 18V,VSENSE = 0mV | 7 |
| Input bias current | IIB | 15 | 28 | 35 | µA | VSENSE = 0mV | 7 |
| Input offset current | IIO | -0.02 | 0.02 | µA | VSENSE = 0mV | 7 | |
| Gain error (version A) | EG | -1 | 0.02 | 1 | % | VSENSE = –5mV 至 5mV,TA = –40°C 至 +125°C(版本 A 和 B) | 7 |
| Gain error drift vs temperature | 3 | 10 | ppm/°C | TA = -40°C 至 +125°C | 7 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VSENSE = -5mV 至 5mV | 7 | ||
| Maximum capacitive load | 1 | nF | 无持续振荡 | 7 | |||
| Output swing relative to V+ rail | -0.05 | -0.2 | V | RL = 10kΩ 至 GND,TA = –40°C 至 +125°C(相对于 V+) | 7 | ||
| Output swing to GND | 0.005 | 0.05 | V | RL = 10kΩ 至 GND,TA = –40°C 至 +125°C(相对于 GND) | 7 | ||
| Gain (INA214) | G | 100 | V/V | 7 | |||
| Bandwidth (INA214) | BW | 30 | kHz | CLOAD = 10pF | 7 | ||
| Slew rate | SR | 0.4 | V/µs | 8 | |||
| Voltage noise density, RTI | 25 | nV/√Hz | 8 | ||||
| Supply voltage range | VS | 2.7 | 26 | V | TA = –40°C 至 +125°C | 8 | |
| Quiescent current | IQ | 65 | 100 | µA | VSENSE = 0mV | 8 | |
| Quiescent current over operating temperature range | IQ | 115 | µA | TA = -40°C 至 +125°C | 8 | ||
| Specified temperature range | -40 | 125 | °C | 8 | |||
| Operating temperature range | -55 | 150 | °C | 8 | |||
| Thermal resistance, junction-to-ambient (SC70, electrical table) | θJA | 250 | °C/W | SC70 package | 8 | ||
| Thermal resistance, junction-to-ambient (DCK, SC70-6) | RθJA | 227.3 | °C/W | DCK (SC70) 6-pin | 6 | ||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 79.5 | °C/W | DCK (SC70) 6-pin | 6 | ||
| Thermal resistance, junction-to-board | RθJB | 72.1 | °C/W | DCK (SC70) 6-pin | 6 | ||
| Junction-to-top characterization parameter | ψJT | 3.6 | °C/W | DCK (SC70) 6-pin | 6 | ||
| Junction-to-board characterization parameter | ψJB | 70.4 | °C/W | DCK (SC70) 6-pin | 6 |
CAD (KiCad official)
- Symbol:
INA214AIDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SOT-363(SC-70-6) (KiCad packages3D, STEP)
- 3D model files:
ina214aidckr-etched.step/ina214aidckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina214aidckr.step/ina214aidckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
8bce21ab869b5599, retrieved 2026-09-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).