main
Ray
ina212aidckr: specified limits as data (metadata.characteristics, 28 rows from the datasheet)
64dc241
INA212AIDCKR
Texas Instruments · Current Sense Amplifiers · SOT-363-6
INA212AIDCKR from Texas Instruments, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input, 0V to V+ (26V maximum), sets output voltage offset point for zero differential input condition. |
| 2 | GND | power_in | Analog ground connection for differential input measurement and output reference, connect to system ground. |
| 3 | V+ | power_in | Positive power supply input, 2.7V to 26V operating range, bypass with 0.01μF to 0.1μF capacitor placed close to pin. |
| 4 | IN+ | input | Positive shunt current sense input connected to load-side of shunt resistor, accepts -0.3V to 26V common mode voltage. |
| 5 | IN− | input | Negative shunt current sense input connected to source-side of shunt resistor, accepts -0.3V to 26V common mode voltage. |
| 6 | OUT | output | Analog output voltage with 1000V/V gain, output swing from GND to V+ with nominal 50mV margin at supply rail. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-363-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range, version A (TA = -40°C to +125°C) | VCM | -0.3 | 26 | V | TA = –40°C to +125°C | 7 | |
| Common-mode rejection ratio (INA212) | CMRR | 105 | 140 | dB | VIN+ = 0V to 26V, VSENSE = 0mV, TA = –40°C to +125°C | 7 | |
| Input offset voltage, RTI (INA212) | VO | -35 | 0.55 | 35 | µV | VSENSE = 0mV | 7 |
| Offset voltage drift, RTI | dVOS/dT | 0.1 | 0.5 | µV/°C | VSENSE = 0mV, TA = –40°C to +125°C | 7 | |
| Power supply rejection ratio, RTI | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV | 7 |
| Input bias current | IIB | 15 | 28 | 35 | µA | VSENSE = 0mV | 7 |
| Input offset current | IIO | -0.02 | 0.02 | µA | VSENSE = 0mV | 7 | |
| Gain error, version A | EG | -1 | 0.02 | 1 | % | VSENSE = –5mV to 5mV, TA = –40°C to +125°C (version A and B) | 7 |
| Gain error vs temperature | 3 | 10 | ppm/°C | TA = -40°C to +125°C | 7 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VSENSE = -5mV to 5mV | 7 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 7 | |||
| Output swing to V+ rail (offset from V+) | -0.05 | -0.2 | V | RL = 10kΩ to GND, TA = –40°C to +125°C | 7 | ||
| Output swing to GND (offset from GND) | 0.005 | 0.05 | V | RL = 10kΩ to GND, TA = –40°C to +125°C | 7 | ||
| Operating supply voltage | VS | 2.7 | 26 | V | TA = –40°C to +125°C | 8 | |
| Quiescent current | IQ | 65 | 100 | µA | VSENSE = 0mV | 8 | |
| Quiescent current over temperature | IQ | 115 | µA | TA = -40°C to +125°C | 8 | ||
| Specified temperature range | -40 | 125 | °C | 8 | |||
| Operating temperature range | -55 | 150 | °C | 8 | |||
| Voltage gain (INA212) | G | 1000 | V/V | 7 | |||
| Bandwidth (INA212) | BW | 4 | kHz | CLOAD = 10pF | 7 | ||
| Slew rate | SR | 0.4 | V/µs | 8 | |||
| Voltage noise density, RTI | 25 | nV/√Hz | 8 | ||||
| Junction-to-ambient thermal resistance (DCK, SC70-6) | RθJA | 227.3 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Junction-to-case (top) thermal resistance (DCK, SC70-6) | RθJC(top) | 79.5 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Junction-to-board thermal resistance (DCK, SC70-6) | RθJB | 72.1 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Junction-to-top characterization parameter (DCK, SC70-6) | ψJT | 3.6 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Junction-to-board characterization parameter (DCK, SC70-6) | ψJB | 70.4 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Thermal resistance θJA, SC70 (electrical characteristics table) | θJA | 250 | °C/W | SC70 package | 8 |
CAD (KiCad official)
- Symbol:
INA212AIDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SOT-363-6 (KiCad packages3D, STEP)
- 3D model files:
ina212aidckr-etched.step/ina212aidckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina212aidckr.step/ina212aidckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
8bce21ab869b5599, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA212AIDCKR
**Texas Instruments** · Current Sense Amplifiers · SOT-363-6
INA212AIDCKR from Texas Instruments, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input, 0V to V+ (26V maximum), sets output voltage offset point for zero differential input condition. |
| 2 | GND | power_in | Analog ground connection for differential input measurement and output reference, connect to system ground. |
| 3 | V+ | power_in | Positive power supply input, 2.7V to 26V operating range, bypass with 0.01μF to 0.1μF capacitor placed close to pin. |
| 4 | IN+ | input | Positive shunt current sense input connected to load-side of shunt resistor, accepts -0.3V to 26V common mode voltage. |
| 5 | IN− | input | Negative shunt current sense input connected to source-side of shunt resistor, accepts -0.3V to 26V common mode voltage. |
| 6 | OUT | output | Analog output voltage with 1000V/V gain, output swing from GND to V+ with nominal 50mV margin at supply rail. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-363-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range, version A (TA = -40°C to +125°C) | VCM | -0.3 | | 26 | V | TA = –40°C to +125°C | 7 |
| Common-mode rejection ratio (INA212) | CMRR | 105 | 140 | | dB | VIN+ = 0V to 26V, VSENSE = 0mV, TA = –40°C to +125°C | 7 |
| Input offset voltage, RTI (INA212) | VO | -35 | 0.55 | 35 | µV | VSENSE = 0mV | 7 |
| Offset voltage drift, RTI | dVOS/dT | | 0.1 | 0.5 | µV/°C | VSENSE = 0mV, TA = –40°C to +125°C | 7 |
| Power supply rejection ratio, RTI | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV | 7 |
| Input bias current | IIB | 15 | 28 | 35 | µA | VSENSE = 0mV | 7 |
| Input offset current | IIO | -0.02 | | 0.02 | µA | VSENSE = 0mV | 7 |
| Gain error, version A | EG | -1 | 0.02 | 1 | % | VSENSE = –5mV to 5mV, TA = –40°C to +125°C (version A and B) | 7 |
| Gain error vs temperature | | | 3 | 10 | ppm/°C | TA = -40°C to +125°C | 7 |
| Nonlinearity error | | -0.01 | | 0.01 | % | VSENSE = -5mV to 5mV | 7 |
| Maximum capacitive load | | | | 1 | nF | No sustained oscillation | 7 |
| Output swing to V+ rail (offset from V+) | | | -0.05 | -0.2 | V | RL = 10kΩ to GND, TA = –40°C to +125°C | 7 |
| Output swing to GND (offset from GND) | | | 0.005 | 0.05 | V | RL = 10kΩ to GND, TA = –40°C to +125°C | 7 |
| Operating supply voltage | VS | 2.7 | | 26 | V | TA = –40°C to +125°C | 8 |
| Quiescent current | IQ | | 65 | 100 | µA | VSENSE = 0mV | 8 |
| Quiescent current over temperature | IQ | | | 115 | µA | TA = -40°C to +125°C | 8 |
| Specified temperature range | | -40 | | 125 | °C | | 8 |
| Operating temperature range | | -55 | | 150 | °C | | 8 |
| Voltage gain (INA212) | G | | 1000 | | V/V | | 7 |
| Bandwidth (INA212) | BW | | 4 | | kHz | CLOAD = 10pF | 7 |
| Slew rate | SR | | 0.4 | | V/µs | | 8 |
| Voltage noise density, RTI | | | 25 | | nV/√Hz | | 8 |
| Junction-to-ambient thermal resistance (DCK, SC70-6) | RθJA | | 227.3 | | °C/W | DCK (SC70) 6-pin package | 6 |
| Junction-to-case (top) thermal resistance (DCK, SC70-6) | RθJC(top) | | 79.5 | | °C/W | DCK (SC70) 6-pin package | 6 |
| Junction-to-board thermal resistance (DCK, SC70-6) | RθJB | | 72.1 | | °C/W | DCK (SC70) 6-pin package | 6 |
| Junction-to-top characterization parameter (DCK, SC70-6) | ψJT | | 3.6 | | °C/W | DCK (SC70) 6-pin package | 6 |
| Junction-to-board characterization parameter (DCK, SC70-6) | ψJB | | 70.4 | | °C/W | DCK (SC70) 6-pin package | 6 |
| Thermal resistance θJA, SC70 (electrical characteristics table) | θJA | | 250 | | °C/W | SC70 package | 8 |
## CAD (KiCad official)
- Symbol: `INA212AIDCKR`
- Footprint: `Package_TO_SOT_SMD:SOT-363_SC-70-6`
- 3D model: SOT-363-6 (KiCad packages3D, STEP)
- 3D model files: `ina212aidckr-etched.step` / `ina212aidckr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina212aidckr.step` / `ina212aidckr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina212) (50 pp, sha256 `8bce21ab869b5599`, retrieved 2026-09-24, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina212aidckr-datasheet.pdf)