Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA212AIDCKR

Texas Instruments · Current Sense Amplifiers · SOT-363-6

INA212AIDCKR from Texas Instruments, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input, 0V to V+ (26V maximum), sets output voltage offset point for zero differential input condition.
2 GND power_in Analog ground connection for differential input measurement and output reference, connect to system ground.
3 V+ power_in Positive power supply input, 2.7V to 26V operating range, bypass with 0.01μF to 0.1μF capacitor placed close to pin.
4 IN+ input Positive shunt current sense input connected to load-side of shunt resistor, accepts -0.3V to 26V common mode voltage.
5 IN− input Negative shunt current sense input connected to source-side of shunt resistor, accepts -0.3V to 26V common mode voltage.
6 OUT output Analog output voltage with 1000V/V gain, output swing from GND to V+ with nominal 50mV margin at supply rail.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-363-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range, version A (TA = -40°C to +125°C) VCM -0.3 26 V TA = –40°C to +125°C 7
Common-mode rejection ratio (INA212) CMRR 105 140 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = –40°C to +125°C 7
Input offset voltage, RTI (INA212) VO -35 0.55 35 µV VSENSE = 0mV 7
Offset voltage drift, RTI dVOS/dT 0.1 0.5 µV/°C VSENSE = 0mV, TA = –40°C to +125°C 7
Power supply rejection ratio, RTI PSRR -10 0.1 10 µV/V VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV 7
Input bias current IIB 15 28 35 µA VSENSE = 0mV 7
Input offset current IIO -0.02 0.02 µA VSENSE = 0mV 7
Gain error, version A EG -1 0.02 1 % VSENSE = –5mV to 5mV, TA = –40°C to +125°C (version A and B) 7
Gain error vs temperature 3 10 ppm/°C TA = -40°C to +125°C 7
Nonlinearity error -0.01 0.01 % VSENSE = -5mV to 5mV 7
Maximum capacitive load 1 nF No sustained oscillation 7
Output swing to V+ rail (offset from V+) -0.05 -0.2 V RL = 10kΩ to GND, TA = –40°C to +125°C 7
Output swing to GND (offset from GND) 0.005 0.05 V RL = 10kΩ to GND, TA = –40°C to +125°C 7
Operating supply voltage VS 2.7 26 V TA = –40°C to +125°C 8
Quiescent current IQ 65 100 µA VSENSE = 0mV 8
Quiescent current over temperature IQ 115 µA TA = -40°C to +125°C 8
Specified temperature range -40 125 °C 8
Operating temperature range -55 150 °C 8
Voltage gain (INA212) G 1000 V/V 7
Bandwidth (INA212) BW 4 kHz CLOAD = 10pF 7
Slew rate SR 0.4 V/µs 8
Voltage noise density, RTI 25 nV/√Hz 8
Junction-to-ambient thermal resistance (DCK, SC70-6) RθJA 227.3 °C/W DCK (SC70) 6-pin package 6
Junction-to-case (top) thermal resistance (DCK, SC70-6) RθJC(top) 79.5 °C/W DCK (SC70) 6-pin package 6
Junction-to-board thermal resistance (DCK, SC70-6) RθJB 72.1 °C/W DCK (SC70) 6-pin package 6
Junction-to-top characterization parameter (DCK, SC70-6) ψJT 3.6 °C/W DCK (SC70) 6-pin package 6
Junction-to-board characterization parameter (DCK, SC70-6) ψJB 70.4 °C/W DCK (SC70) 6-pin package 6
Thermal resistance θJA, SC70 (electrical characteristics table) θJA 250 °C/W SC70 package 8

CAD (KiCad official)

  • Symbol: INA212AIDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SOT-363-6 (KiCad packages3D, STEP)
  • 3D model files: ina212aidckr-etched.step / ina212aidckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina212aidckr.step / ina212aidckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 8bce21ab869b5599, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF