Generated by kicad-footprint-generator · KiCad file format 20260206
INA210BIRSWT
Texas Instruments · Current Sense Amplifiers · UQFN-10(1.4x1.8)
INA210BIRSWT from Texas Instruments, in a UQFN-10(1.4x1.8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected; leave floating or connect to ground. |
| 2 | IN+ | input | Analog input connected to the supply side of the shunt resistor; tie to the other IN+ pin on the RSW package. |
| 3 | IN+ | input | Analog input connected to the supply side of the shunt resistor; tie to the other IN+ pin on the RSW package. |
| 4 | IN- | input | Analog input connected to the load side of the shunt resistor; tie to the other IN- pin on the RSW package. |
| 5 | IN- | input | Analog input connected to the load side of the shunt resistor; tie to the other IN- pin on the RSW package. |
| 6 | V+ | power_in | Power supply input, 2.7 V to 26 V. |
| 7 | NC | unconnected | Not internally connected; leave floating or connect to ground. |
| 8 | REF | input | Reference voltage input, 0 V to V+. |
| 9 | GND | power_in | Analog ground. |
| 10 | OUT | output | Analog output carrying the output voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.4x1.8) |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage, RTI (INA210) | VO | -35 | 0.55 | 35 | µV | VSENSE = 0 mV | 6 |
| Gain error (Versions A and B) | EG | -1 | 0.02 | 1 | % | VSENSE = -5 mV to 5 mV, TA = -40°C to +125°C | 6 |
| Gain error vs temperature | 3 | 10 | ppm/°C | TA = -40°C to +125°C | 6 | ||
| Quiescent current | IQ | 65 | 100 | µA | VSENSE = 0 mV | 7 | |
| Quiescent current over temperature | IQ | 115 | µA | TA = -40°C to +125°C | 7 | ||
| Operating voltage range | VS | 2.7 | 26 | V | TA = -40°C to +125°C | 7 | |
| Common-mode input range (Version B) | VCM | -0.1 | 26 | V | TA = -40°C to +125°C | 6 | |
| Common-mode rejection ratio (INA210) | CMRR | 105 | 140 | dB | VIN+ = 0 V to 26 V, VSENSE = 0 mV, TA = -40°C to +125°C | 6 | |
| Offset voltage drift vs temperature | dVOS/dT | 0.1 | 0.5 | µV/°C | VSENSE = 0 mV, TA = -40°C to +125°C | 6 | |
| Power supply rejection ratio, RTI | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7 V to 18 V, VIN+ = 18 V, VSENSE = 0 mV | 6 |
| Input bias current | IIB | 15 | 28 | 35 | µA | VSENSE = 0 mV | 6 |
| Input offset current | IIO | -0.02 | 0.02 | µA | VSENSE = 0 mV | 6 | |
| Gain (INA210) | G | 200 | V/V | 6 | |||
| Nonlinearity error | -0.01 | 0.01 | 0.01 | % | VSENSE = -5 mV to 5 mV | 6 | |
| Maximum capacitive load | 1 | nF | No sustained oscillation | 6 | |||
| Bandwidth (INA210) | BW | 14 | kHz | CLOAD = 10 pF | 6 | ||
| Slew rate | SR | 0.4 | V/µs | 6 | |||
| Voltage noise density | 25 | nV/√Hz | 7 | ||||
| Specified temperature range | TA | -40 | 125 | °C | 7 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | Recommended operating conditions | 4 | |
| Common-mode input voltage | VCM | 12 | V | 4 | |||
| Operating supply voltage | VS | 5 | V | 4 | |||
| Supply voltage | VS | 26 | V | 4 | |||
| Differential analog input voltage | VIN+, VIN- | -26 | 26 | V | 4 | ||
| Common-mode analog input voltage (Version B) | VIN+, VIN- | -0.1 | 26 | V | Common-mode (Version B), relative to GND | 4 | |
| REF input voltage | VREF | -0.3 | V | Maximum printed as (VS) + 0.3 V | 4 | ||
| Output voltage | VOUT | -0.3 | V | Maximum printed as (VS) + 0.3 V | 4 | ||
| Input current into any terminal | 5 | mA | 4 | ||||
| Operating temperature (absolute maximum) | -55 | 150 | °C | Operating free-air temperature range | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human-body model (Versions B and C) | V(ESD) | -3500 | 3500 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD charged-device model (Versions B and C) | V(ESD) | -1000 | 1000 | V | CDM per JEDEC JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance (RSW) | RθJA | 107.3 | °C/W | RSW (UQFN), 10 pins | 5 | ||
| Junction-to-case (top) thermal resistance (RSW) | RθJC(top) | 56.5 | °C/W | RSW (UQFN), 10 pins | 5 | ||
| Junction-to-board thermal resistance (RSW) | RθJB | 18.7 | °C/W | RSW (UQFN), 10 pins | 5 | ||
| Junction-to-top characterization parameter (RSW) | ψJT | 1.1 | °C/W | RSW (UQFN), 10 pins | 5 | ||
| Junction-to-board characterization parameter (RSW) | ψJB | 18.7 | °C/W | RSW (UQFN), 10 pins | 5 | ||
| Thermal resistance, Thin UQFN | θJA | 80 | °C/W | Thin UQFN package | 7 |
CAD (KiCad official)
- Symbol:
INA210BIRSWT - Footprint:
Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm - 3D model: UQFN-10(1.4x1.8) (KiCad packages3D, STEP)
- 3D model files:
ina210birswt-etched.step/ina210birswt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina210birswt.step/ina210birswt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
72355270eb967757, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).