Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA210BIRSWT

Texas Instruments · Current Sense Amplifiers · UQFN-10(1.4x1.8)

INA210BIRSWT from Texas Instruments, in a UQFN-10(1.4x1.8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not internally connected; leave floating or connect to ground.
2 IN+ input Analog input connected to the supply side of the shunt resistor; tie to the other IN+ pin on the RSW package.
3 IN+ input Analog input connected to the supply side of the shunt resistor; tie to the other IN+ pin on the RSW package.
4 IN- input Analog input connected to the load side of the shunt resistor; tie to the other IN- pin on the RSW package.
5 IN- input Analog input connected to the load side of the shunt resistor; tie to the other IN- pin on the RSW package.
6 V+ power_in Power supply input, 2.7 V to 26 V.
7 NC unconnected Not internally connected; leave floating or connect to ground.
8 REF input Reference voltage input, 0 V to V+.
9 GND power_in Analog ground.
10 OUT output Analog output carrying the output voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package UQFN-10(1.4x1.8)
Category Amplifiers/Comparators
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset voltage, RTI (INA210) VO -35 0.55 35 µV VSENSE = 0 mV 6
Gain error (Versions A and B) EG -1 0.02 1 % VSENSE = -5 mV to 5 mV, TA = -40°C to +125°C 6
Gain error vs temperature 3 10 ppm/°C TA = -40°C to +125°C 6
Quiescent current IQ 65 100 µA VSENSE = 0 mV 7
Quiescent current over temperature IQ 115 µA TA = -40°C to +125°C 7
Operating voltage range VS 2.7 26 V TA = -40°C to +125°C 7
Common-mode input range (Version B) VCM -0.1 26 V TA = -40°C to +125°C 6
Common-mode rejection ratio (INA210) CMRR 105 140 dB VIN+ = 0 V to 26 V, VSENSE = 0 mV, TA = -40°C to +125°C 6
Offset voltage drift vs temperature dVOS/dT 0.1 0.5 µV/°C VSENSE = 0 mV, TA = -40°C to +125°C 6
Power supply rejection ratio, RTI PSRR -10 0.1 10 µV/V VS = 2.7 V to 18 V, VIN+ = 18 V, VSENSE = 0 mV 6
Input bias current IIB 15 28 35 µA VSENSE = 0 mV 6
Input offset current IIO -0.02 0.02 µA VSENSE = 0 mV 6
Gain (INA210) G 200 V/V 6
Nonlinearity error -0.01 0.01 0.01 % VSENSE = -5 mV to 5 mV 6
Maximum capacitive load 1 nF No sustained oscillation 6
Bandwidth (INA210) BW 14 kHz CLOAD = 10 pF 6
Slew rate SR 0.4 V/µs 6
Voltage noise density 25 nV/√Hz 7
Specified temperature range TA -40 125 °C 7
Operating free-air temperature TA -40 125 °C Recommended operating conditions 4
Common-mode input voltage VCM 12 V 4
Operating supply voltage VS 5 V 4
Supply voltage VS 26 V 4
Differential analog input voltage VIN+, VIN- -26 26 V 4
Common-mode analog input voltage (Version B) VIN+, VIN- -0.1 26 V Common-mode (Version B), relative to GND 4
REF input voltage VREF -0.3 V Maximum printed as (VS) + 0.3 V 4
Output voltage VOUT -0.3 V Maximum printed as (VS) + 0.3 V 4
Input current into any terminal 5 mA 4
Operating temperature (absolute maximum) -55 150 °C Operating free-air temperature range 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD human-body model (Versions B and C) V(ESD) -3500 3500 V HBM per ANSI/ESDA/JEDEC JS-001 4
ESD charged-device model (Versions B and C) V(ESD) -1000 1000 V CDM per JEDEC JESD22-C101 4
Junction-to-ambient thermal resistance (RSW) RθJA 107.3 °C/W RSW (UQFN), 10 pins 5
Junction-to-case (top) thermal resistance (RSW) RθJC(top) 56.5 °C/W RSW (UQFN), 10 pins 5
Junction-to-board thermal resistance (RSW) RθJB 18.7 °C/W RSW (UQFN), 10 pins 5
Junction-to-top characterization parameter (RSW) ψJT 1.1 °C/W RSW (UQFN), 10 pins 5
Junction-to-board characterization parameter (RSW) ψJB 18.7 °C/W RSW (UQFN), 10 pins 5
Thermal resistance, Thin UQFN θJA 80 °C/W Thin UQFN package 7

CAD (KiCad official)

  • Symbol: INA210BIRSWT
  • Footprint: Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm
  • 3D model: UQFN-10(1.4x1.8) (KiCad packages3D, STEP)
  • 3D model files: ina210birswt-etched.step / ina210birswt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina210birswt.step / ina210birswt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 72355270eb967757, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF