main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina210aidckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina210aidckr: viewers · Ray
ina210aidckr-etched.fit.json ina210aidckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina210aidckr-etched.glb ina210aidckr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
ina210aidckr-etched.step ina210aidckr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
ina210aidckr-hero.glb ina210aidckr: hero from the plain model · Ray
ina210aidckr-hero.overlay.json ina210aidckr: hero from the plain model · Ray
ina210aidckr.glb Publish 0.1.0 · Ray
ina210aidckr.kicad_mod Publish 0.1.0 · Ray
ina210aidckr.kicad_sym Publish 0.1.0 · Ray
ina210aidckr.lbr Publish 0.1.0 · Ray
ina210aidckr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina210aidckr: specified limits as data (metadata.characteristics, 21 rows from the datasheet) · Ray

INA210AIDCKR

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA210AIDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input that sets the output offset. Accepts any voltage from 0 V to V+ and defines the zero-current output level.
2 GND power_in Analog ground return for the device.
3 V+ power_in Positive supply input, 2.7 V to 26 V. Bypass with a 0.01 µF to 0.1 µF capacitor to GND close to the pin.
4 IN+ input Non-inverting shunt-sense input. Connects to the supply side of the external current-sense (shunt) resistor. Common-mode range -0.3 V to 26 V, independent of V+.
5 IN- input Inverting shunt-sense input. Connects to the load side of the external current-sense (shunt) resistor. Common-mode range -0.3 V to 26 V, independent of V+.
6 OUT output Amplified analog output voltage. VOUT = (ILOAD × RSHUNT) × 200 V/V + VREF. Output swing limited to GND-0.3 V to V++0.3 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • INA210AIDCKR
  • INA210AIDCKT
  • INA210AIDCKRIDRSWR
  • INA210AIDCKRIDRSWT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range (version A) VCM -0.3 26 V Version A, TA = -40°C to +125°C 7
Common-mode rejection ratio (INA210) CMRR 105 140 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C 7
Input offset voltage, RTI (INA210) VO -35 0.55 35 µV VSENSE = 0mV 7
Input offset voltage drift vs temperature, RTI dVOS/dT 0.1 0.5 µV/°C VSENSE = 0mV, TA = -40°C to +125°C 7
Power-supply rejection ratio, RTI PSRR -10 0.1 10 µV/V VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV 7
Input bias current IIB 15 28 35 µA VSENSE = 0mV 7
Gain error (version A and B) EG -1 0.02 1 % VSENSE = -5mV to 5mV, TA = -40°C to +125°C, version A and B 7
Gain error drift vs temperature 3 10 ppm/°C TA = -40°C to +125°C 7
Nonlinearity error -0.01 0.01 % VSENSE = -5mV to 5mV 7
Maximum capacitive load 1 nF No sustained oscillation 7
Supply voltage range VS 2.7 26 V TA = -40°C to +125°C 8
Quiescent current IQ 65 100 µA VSENSE = 0mV 8
Quiescent current over temperature range IQ 115 µA TA = -40°C to +125°C 8
Specified temperature range -40 125 °C 8
Operating temperature range -55 150 °C 8
Junction-to-ambient thermal resistance (DCK, SC70 6-pin) RθJA 227.3 °C/W DCK (SC70) 6-pin package 6
Junction-to-ambient thermal resistance (SC70) θJA 250 °C/W SC70 package, per electrical characteristics table 8
Junction-to-case (top) thermal resistance (DCK) RθJC(top) 79.5 °C/W DCK (SC70) 6-pin package 6
Junction-to-board thermal resistance (DCK) RθJB 72.1 °C/W DCK (SC70) 6-pin package 6
Junction-to-top characterization parameter (DCK) ψJT 3.6 °C/W DCK (SC70) 6-pin package 6
Junction-to-board characterization parameter (DCK) ψJB 70.4 °C/W DCK (SC70) 6-pin package 6

CAD (KiCad official)

  • Symbol: INA210AIDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina210aidckr-etched.step / ina210aidckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina210aidckr.step / ina210aidckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 8bce21ab869b5599, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF