3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownINA210AIDCKR
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA210AIDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input that sets the output offset. Accepts any voltage from 0 V to V+ and defines the zero-current output level. |
| 2 | GND | power_in | Analog ground return for the device. |
| 3 | V+ | power_in | Positive supply input, 2.7 V to 26 V. Bypass with a 0.01 µF to 0.1 µF capacitor to GND close to the pin. |
| 4 | IN+ | input | Non-inverting shunt-sense input. Connects to the supply side of the external current-sense (shunt) resistor. Common-mode range -0.3 V to 26 V, independent of V+. |
| 5 | IN- | input | Inverting shunt-sense input. Connects to the load side of the external current-sense (shunt) resistor. Common-mode range -0.3 V to 26 V, independent of V+. |
| 6 | OUT | output | Amplified analog output voltage. VOUT = (ILOAD × RSHUNT) × 200 V/V + VREF. Output swing limited to GND-0.3 V to V++0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
INA210AIDCKRINA210AIDCKTINA210AIDCKRIDRSWRINA210AIDCKRIDRSWT
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range (version A) | VCM | -0.3 | 26 | V | Version A, TA = -40°C to +125°C | 7 | |
| Common-mode rejection ratio (INA210) | CMRR | 105 | 140 | dB | VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C | 7 | |
| Input offset voltage, RTI (INA210) | VO | -35 | 0.55 | 35 | µV | VSENSE = 0mV | 7 |
| Input offset voltage drift vs temperature, RTI | dVOS/dT | 0.1 | 0.5 | µV/°C | VSENSE = 0mV, TA = -40°C to +125°C | 7 | |
| Power-supply rejection ratio, RTI | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV | 7 |
| Input bias current | IIB | 15 | 28 | 35 | µA | VSENSE = 0mV | 7 |
| Gain error (version A and B) | EG | -1 | 0.02 | 1 | % | VSENSE = -5mV to 5mV, TA = -40°C to +125°C, version A and B | 7 |
| Gain error drift vs temperature | 3 | 10 | ppm/°C | TA = -40°C to +125°C | 7 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VSENSE = -5mV to 5mV | 7 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 7 | |||
| Supply voltage range | VS | 2.7 | 26 | V | TA = -40°C to +125°C | 8 | |
| Quiescent current | IQ | 65 | 100 | µA | VSENSE = 0mV | 8 | |
| Quiescent current over temperature range | IQ | 115 | µA | TA = -40°C to +125°C | 8 | ||
| Specified temperature range | -40 | 125 | °C | 8 | |||
| Operating temperature range | -55 | 150 | °C | 8 | |||
| Junction-to-ambient thermal resistance (DCK, SC70 6-pin) | RθJA | 227.3 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Junction-to-ambient thermal resistance (SC70) | θJA | 250 | °C/W | SC70 package, per electrical characteristics table | 8 | ||
| Junction-to-case (top) thermal resistance (DCK) | RθJC(top) | 79.5 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Junction-to-board thermal resistance (DCK) | RθJB | 72.1 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Junction-to-top characterization parameter (DCK) | ψJT | 3.6 | °C/W | DCK (SC70) 6-pin package | 6 | ||
| Junction-to-board characterization parameter (DCK) | ψJB | 70.4 | °C/W | DCK (SC70) 6-pin package | 6 |
CAD (KiCad official)
- Symbol:
INA210AIDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina210aidckr-etched.step/ina210aidckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina210aidckr.step/ina210aidckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
8bce21ab869b5599, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).