Generated by kicad-footprint-generator · KiCad file format 20260206
INA205AIPWR
Texas Instruments · Current Sense Amplifiers · TSSOP-14
INA205AIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Supply voltage input, 2.7 V to 18 V operating range. |
| 2 | OUT | output | Shunt voltage output with 100 V/V gain for INA205. |
| 3 | CMP1 IN-/0.6-V Ref | input | Comparator 1 negative input, can be used to override the internal 0.6-V reference. |
| 4 | CMP1 IN+ | input | Comparator 1 positive input for latched threshold detection. |
| 5 | CMP2 IN+ | input | Comparator 2 positive input for programmable-delay threshold detection. |
| 6 | CMP2 IN-/0.6-V Ref | input | Comparator 2 negative input, can be used to override the internal 0.6-V reference. |
| 7 | GND | power_in | Ground reference, 0 V return for all currents. |
| 8 | CMP1 RESET | input | Comparator 1 output reset, active low asynchronous input. |
| 9 | CMP2 DELAY | input | Comparator 2 delay time adjustment capacitor pin, maximum voltage 10 V. |
| 10 | CMP2 OUT | tri_state | Comparator 2 open-drain output, maximum voltage rating 18 V. |
| 11 | CMP1 OUT | tri_state | Comparator 1 open-drain latched output, maximum voltage rating 18 V. |
| 12 | 1.2-V REF OUT | output | Internal 1.2-V reference output for external biasing applications. |
| 13 | VIN- | power_in | Connect to shunt low side, common-mode voltage range -16 V to 80 V. |
| 14 | VIN+ | power_in | Connect to shunt high side, common-mode voltage range -16 V to 80 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 18 | V | 5 | |||
| Current-shunt analog input differential voltage | (VIN+) – (VIN–) | -18 | 18 | V | 5 | ||
| Current-shunt analog input common-mode voltage | -16 | 80 | V | 5 | |||
| Comparator output pin voltage | 18 | V | 5 | ||||
| VREF and CMP2 delay pin voltage | 10 | V | 5 | ||||
| Input current into any pin | 5 | mA | 5 | ||||
| Operating temperature | -55 | 150 | °C | 5 | |||
| Junction temperature | -65 | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Common-mode input voltage | VCM | -16 | 12 | 80 | V | 5 | |
| Operating supply voltage | VS | 2.7 | 12 | 18 | V | 5 | |
| Operating free-air temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Common-mode input range | VCM | -16 | 80 | V | TA = –40°C to 125°C | 6 | |
| Common-mode rejection ratio | CMRR | 80 | 100 | dB | VCM = –16 V to 80 V | 6 | |
| Common-mode rejection ratio over temperature | CMRR | 100 | 123 | dB | VCM = 12 V to 80 V, TA = –40°C to 125°C | 6 | |
| Offset voltage, RTI | VOS | -2.5 | 0.5 | 2.5 | mV | 6 | |
| Offset voltage, RTI, 25°C to 125°C | VOS | -3 | 3 | mV | TA = 25°C to 125°C | 6 | |
| Offset voltage, RTI, –40°C to 25°C | VOS | -3.5 | 3.5 | mV | TA = –40°C to 25°C | 6 | |
| Offset voltage vs power supply (PSR) | PSR | 2.5 | 100 | μV/V | VOUT = 2 V, VCM = 18 V, 2.7 V; TA = –40°C to 125°C | 6 | |
| Input bias current, VIN– pin | IB | -16 | 9 | 16 | μA | TA = –40°C to 125°C | 6 |
| Gain error | -1 | 0.2 | 1 | % | VSENSE = 20 mV to 100 mV | 6 | |
| Gain error over temperature | -2 | 2 | % | VSENSE = 20 mV to 100 mV, TA = –40°C to 125°C | 6 | ||
| Total output error | -2.2 | 0.75 | 2.2 | % | VSENSE = 120 mV, VS = 16 V | 6 | |
| Total output error over temperature | -3.5 | 3.5 | % | VSENSE = 120 mV, VS = 16 V, TA = –40°C to 125°C | 6 | ||
| Output voltage, VSENSE < 20 mV, common-mode below 0 V | VOUT | 300 | mV | –16 V ≤ VCM < 0 V | 6 | ||
| INA205 output voltage, VSENSE < 20 mV | VOUT | 2 | V | 0 V ≤ VCM ≤ VS, VS = 5 V | 6 | ||
| Output voltage, VSENSE < 20 mV, VCM above supply | VOUT | 300 | mV | VS < VCM ≤ 80 V | 6 | ||
| Offset voltage drift, comparator 1 | -2 | 2 | μV/°C | TA = –40°C to 125°C | 7 | ||
| Comparator threshold voltage | 590 | 608 | 620 | mV | TA = 25°C | 7 | |
| Comparator threshold voltage over temperature | 586 | 625 | mV | TA = –40°C to 125°C | 7 | ||
| Comparator input bias current, CMP1 IN+ and CMP2 IN+ | 0.005 | 10 | nA | 7 | |||
| Comparator input range, CMP1 IN+ and CMP2 IN+ | 0 | V | 7 | ||||
| Comparator high-level output current | 0.0001 | 1 | μA | VID = 0.4 V, VOH = VS | 8 | ||
| Comparator low-level output voltage | 220 | 300 | mV | VID = –0.6 V, IOL = 2.35 mA | 8 | ||
| 1.2-V reference output voltage | VREF OUT | 1.188 | 1.2 | 1.212 | V | 9 | |
| 1.2-V reference drift | dVOUT/dT | 40 | 100 | ppm/°C | TA = –40°C to 85°C | 9 | |
| Reference sourcing load regulation | dVOUT/dILOAD | 0.4 | 2 | mV/mA | 0 mA < ISOURCE < 0.5 mA | 9 | |
| Supply voltage operating range | VS | 2.7 | 18 | V | TA = –40°C to 125°C | 9 | |
| Quiescent current | IQ | 1.8 | 2.2 | mA | VOUT = 2 V | 9 | |
| Quiescent current over temperature | IQ | 2.8 | mA | VSENSE = 0 mV | 9 | ||
| Reference sinking load regulation | dVOUT/dILOAD | 0.4 | mV/mA | 0 mA < ISINK < 0.5 mA | 9 | ||
| 0.6-V reference output voltage | VREF | 0.6 | V | Pins 3 and 6 of 14-pin packages only | 9 | ||
| Reference line regulation | dVOUT/dVS | 30 | μV/V | 2.7 V < VS < 18 V | 9 | ||
| Reference output impedance | 10 | kΩ | Pins 3 and 6 of 14-pin packages only | 9 | |||
| Reference maximum capacitive load | 10 | nF | No sustained oscillations | 9 | |||
| Current-shunt output impedance | RO | 1.5 | Ω | Pin 2 | 6 | ||
| Current-shunt maximum capacitive load | 10 | nF | No sustained oscillation | 6 | |||
| Comparator offset voltage | 2 | mV | Comparator common-mode voltage = threshold voltage | 6 | |||
| Offset voltage drift, comparator 2 | 5.4 | μV/°C | TA = –40°C to 125°C | 7 | |||
| Comparator 1 hysteresis | -8 | mV | TA = –40°C to 85°C | 7 | |||
| Comparator 1 response time | 1.3 | μs | RL to 5 V, CL = 15 pF, 100-mV input step with 5-mV overdrive | 8 | |||
| Comparator 2 response time | 1.3 | μs | RL to 5 V, CL = 15 pF, 100-mV input step with 5-mV overdrive, CDELAY pin open | 8 | |||
| RESET threshold | 1.1 | V | 8 | ||||
| Minimum RESET pulse width | 1.5 | μs | 8 | ||||
| RESET propagation delay | 3 | μs | 8 | ||||
| Comparator 2 delay | tD | 0.5 | s | CDELAY = 0.1 μF | 8 | ||
| Slew rate | SR | 1 | V/μs | 7 | |||
| Bandwidth, INA205 | BW | 200 | kHz | CLOAD = 5 pF | 7 | ||
| Comparator power-on reset threshold | 1.5 | V | 9 | ||||
| Thermal resistance, junction-to-ambient (PW, 14 pins) | RθJA | 112.6 | °C/W | 5 | |||
| Thermal resistance, junction-to-case (top) (PW, 14 pins) | RθJC(top) | 37.2 | °C/W | 5 | |||
| Thermal resistance, junction-to-board (PW, 14 pins) | RθJB | 55.4 | °C/W | 5 | |||
| Thermal resistance, junction-to-case (bottom) (PW, 14 pins) | RθJC(bot) | 150 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
INA205AIPWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
ina205aipwr-etched.step/ina205aipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina205aipwr.step/ina205aipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
2df3f1c5773ed6ad, retrieved 2026-10-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).