Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA205AIPWR

Texas Instruments · Current Sense Amplifiers · TSSOP-14

INA205AIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Supply voltage input, 2.7 V to 18 V operating range.
2 OUT output Shunt voltage output with 100 V/V gain for INA205.
3 CMP1 IN-/0.6-V Ref input Comparator 1 negative input, can be used to override the internal 0.6-V reference.
4 CMP1 IN+ input Comparator 1 positive input for latched threshold detection.
5 CMP2 IN+ input Comparator 2 positive input for programmable-delay threshold detection.
6 CMP2 IN-/0.6-V Ref input Comparator 2 negative input, can be used to override the internal 0.6-V reference.
7 GND power_in Ground reference, 0 V return for all currents.
8 CMP1 RESET input Comparator 1 output reset, active low asynchronous input.
9 CMP2 DELAY input Comparator 2 delay time adjustment capacitor pin, maximum voltage 10 V.
10 CMP2 OUT tri_state Comparator 2 open-drain output, maximum voltage rating 18 V.
11 CMP1 OUT tri_state Comparator 1 open-drain latched output, maximum voltage rating 18 V.
12 1.2-V REF OUT output Internal 1.2-V reference output for external biasing applications.
13 VIN- power_in Connect to shunt low side, common-mode voltage range -16 V to 80 V.
14 VIN+ power_in Connect to shunt high side, common-mode voltage range -16 V to 80 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 18 V 5
Current-shunt analog input differential voltage (VIN+) – (VIN–) -18 18 V 5
Current-shunt analog input common-mode voltage -16 80 V 5
Comparator output pin voltage 18 V 5
VREF and CMP2 delay pin voltage 10 V 5
Input current into any pin 5 mA 5
Operating temperature -55 150 °C 5
Junction temperature -65 150 °C 5
Storage temperature Tstg -65 150 °C 5
Common-mode input voltage VCM -16 12 80 V 5
Operating supply voltage VS 2.7 12 18 V 5
Operating free-air temperature TA -40 25 125 °C 5
Common-mode input range VCM -16 80 V TA = –40°C to 125°C 6
Common-mode rejection ratio CMRR 80 100 dB VCM = –16 V to 80 V 6
Common-mode rejection ratio over temperature CMRR 100 123 dB VCM = 12 V to 80 V, TA = –40°C to 125°C 6
Offset voltage, RTI VOS -2.5 0.5 2.5 mV 6
Offset voltage, RTI, 25°C to 125°C VOS -3 3 mV TA = 25°C to 125°C 6
Offset voltage, RTI, –40°C to 25°C VOS -3.5 3.5 mV TA = –40°C to 25°C 6
Offset voltage vs power supply (PSR) PSR 2.5 100 μV/V VOUT = 2 V, VCM = 18 V, 2.7 V; TA = –40°C to 125°C 6
Input bias current, VIN– pin IB -16 9 16 μA TA = –40°C to 125°C 6
Gain error -1 0.2 1 % VSENSE = 20 mV to 100 mV 6
Gain error over temperature -2 2 % VSENSE = 20 mV to 100 mV, TA = –40°C to 125°C 6
Total output error -2.2 0.75 2.2 % VSENSE = 120 mV, VS = 16 V 6
Total output error over temperature -3.5 3.5 % VSENSE = 120 mV, VS = 16 V, TA = –40°C to 125°C 6
Output voltage, VSENSE < 20 mV, common-mode below 0 V VOUT 300 mV –16 V ≤ VCM < 0 V 6
INA205 output voltage, VSENSE < 20 mV VOUT 2 V 0 V ≤ VCM ≤ VS, VS = 5 V 6
Output voltage, VSENSE < 20 mV, VCM above supply VOUT 300 mV VS < VCM ≤ 80 V 6
Offset voltage drift, comparator 1 -2 2 μV/°C TA = –40°C to 125°C 7
Comparator threshold voltage 590 608 620 mV TA = 25°C 7
Comparator threshold voltage over temperature 586 625 mV TA = –40°C to 125°C 7
Comparator input bias current, CMP1 IN+ and CMP2 IN+ 0.005 10 nA 7
Comparator input range, CMP1 IN+ and CMP2 IN+ 0 V 7
Comparator high-level output current 0.0001 1 μA VID = 0.4 V, VOH = VS 8
Comparator low-level output voltage 220 300 mV VID = –0.6 V, IOL = 2.35 mA 8
1.2-V reference output voltage VREF OUT 1.188 1.2 1.212 V 9
1.2-V reference drift dVOUT/dT 40 100 ppm/°C TA = –40°C to 85°C 9
Reference sourcing load regulation dVOUT/dILOAD 0.4 2 mV/mA 0 mA < ISOURCE < 0.5 mA 9
Supply voltage operating range VS 2.7 18 V TA = –40°C to 125°C 9
Quiescent current IQ 1.8 2.2 mA VOUT = 2 V 9
Quiescent current over temperature IQ 2.8 mA VSENSE = 0 mV 9
Reference sinking load regulation dVOUT/dILOAD 0.4 mV/mA 0 mA < ISINK < 0.5 mA 9
0.6-V reference output voltage VREF 0.6 V Pins 3 and 6 of 14-pin packages only 9
Reference line regulation dVOUT/dVS 30 μV/V 2.7 V < VS < 18 V 9
Reference output impedance 10 kΩ Pins 3 and 6 of 14-pin packages only 9
Reference maximum capacitive load 10 nF No sustained oscillations 9
Current-shunt output impedance RO 1.5 Ω Pin 2 6
Current-shunt maximum capacitive load 10 nF No sustained oscillation 6
Comparator offset voltage 2 mV Comparator common-mode voltage = threshold voltage 6
Offset voltage drift, comparator 2 5.4 μV/°C TA = –40°C to 125°C 7
Comparator 1 hysteresis -8 mV TA = –40°C to 85°C 7
Comparator 1 response time 1.3 μs RL to 5 V, CL = 15 pF, 100-mV input step with 5-mV overdrive 8
Comparator 2 response time 1.3 μs RL to 5 V, CL = 15 pF, 100-mV input step with 5-mV overdrive, CDELAY pin open 8
RESET threshold 1.1 V 8
Minimum RESET pulse width 1.5 μs 8
RESET propagation delay 3 μs 8
Comparator 2 delay tD 0.5 s CDELAY = 0.1 μF 8
Slew rate SR 1 V/μs 7
Bandwidth, INA205 BW 200 kHz CLOAD = 5 pF 7
Comparator power-on reset threshold 1.5 V 9
Thermal resistance, junction-to-ambient (PW, 14 pins) RθJA 112.6 °C/W 5
Thermal resistance, junction-to-case (top) (PW, 14 pins) RθJC(top) 37.2 °C/W 5
Thermal resistance, junction-to-board (PW, 14 pins) RθJB 55.4 °C/W 5
Thermal resistance, junction-to-case (bottom) (PW, 14 pins) RθJC(bot) 150 °C/W 5

CAD (KiCad official)

  • Symbol: INA205AIPWR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: ina205aipwr-etched.step / ina205aipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina205aipwr.step / ina205aipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 2df3f1c5773ed6ad, retrieved 2026-10-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF