component
INA199C2DCKR
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, SC-70-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA199C2DCKR
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA199C2DCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input (0V to V+) that sets the output DC operating point at zero differential input; enables single-ended or bipolar current measurement configuration. |
| 2 | GND | power_in | Analog ground connection serving as the reference potential for all input and output signal measurements throughout the device. |
| 3 | V+ | power_in | Positive power supply input accepting 2.7V to 26V to provide bias current for internal amplifier circuitry and set output voltage range. |
| 4 | IN+ | input | Non-inverting differential input connected to the power-side of the shunt resistor; withstands common-mode voltage from -0.1V to 26V independent of supply voltage per C-version specification. |
| 5 | IN- | input | Inverting differential input connected to the load-side of the shunt resistor; the voltage difference (IN+) − (IN−) produces an output voltage amplified by the gain of 100V/V for C2 variant. |
| 6 | OUT | output | Analog output voltage with swing from approximately 0.05V above GND to (V+)−0.2V below supply rail at 10kΩ load; changes from REF voltage proportionally to input differential voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
INA199C2DCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina199c2dckr-etched.step/ina199c2dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina199c2dckr.step/ina199c2dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
f48fb5be37c0cf43, retrieved 2026-09-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).