Generated by kicad-footprint-generator · KiCad file format 20260206
INA199B1RSWR
Texas Instruments · Current Sense Amplifiers · UQFN-10(1.4x1.8)
INA199B1RSWR from Texas Instruments, in a UQFN-10(1.4x1.8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; may be left floating or connected to any voltage between GND and V+. |
| 2 | IN+ | input | Analog input connected to the power side of the shunt resistor; dual IN+ pins must be tied together; common mode input range -0.1V to 26V. |
| 3 | IN+ | input | Analog input connected to the power side of the shunt resistor; dual IN+ pins must be tied together; common mode input range -0.1V to 26V. |
| 4 | IN- | input | Analog input connected to the load side of the shunt resistor; dual IN- pins must be tied together; common mode input range -0.1V to 26V. |
| 5 | IN- | input | Analog input connected to the load side of the shunt resistor; dual IN- pins must be tied together; common mode input range -0.1V to 26V. |
| 6 | V+ | power_in | Analog power supply; operating voltage range 2.7V to 26V; sets the upper output range limit. |
| 7 | NC | unconnected | No internal connection; may be left floating or connected to any voltage between GND and V+. |
| 8 | REF | input | Reference voltage input; voltage range 0V to V+; sets the output offset voltage for single or bidirectional current measurement. |
| 9 | GND | power_in | Analog ground; reference point for all voltage measurements. |
| 10 | OUT | output | Analog output voltage; output swing limited to (V+)-0.05V to (V+)-0.2V relative to V+, and (GND)+0.005V to (GND)+0.05V relative to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.4x1.8) |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage (versions B and C) | VCM | -0.1 | 26 | V | 版本 B 和 C,TA = –40°C 至 125°C | 6 | |
| Common-mode rejection | CMR | 100 | 120 | dB | VIN+ = 0V 至 26V,VSENSE = 0mV,TA = –40°C 至 125°C | 6 | |
| Input offset voltage, RTI | VOS | -150 | 5 | 150 | μV | VSENSE = 0mV | 6 |
| Offset voltage drift | dVOS/dT | 0.1 | 0.5 | μV/°C | TA = –40°C 至 125°C | 6 | |
| Gain error (versions A and B) | -1.5 | 0.03 | 1.5 | % | 版本 A 和 B,VSENSE =–5mV 至 5mV,TA = –40°C 至 125°C | 6 | |
| Gain error vs temperature | 3 | 10 | ppm/°C | TA = –40°C 至 125°C | 6 | ||
| Supply voltage range | VS | 2.7 | 26 | V | TA = –40°C 至 125°C | 6 | |
| Supply voltage range | VS | 2.5 | 26 | V | –20°C 至 85°C | 6 | |
| Quiescent current | IQ | 65 | 100 | μA | VSENSE = 0mV | 6 | |
| Quiescent current over temperature | IQ | 115 | μA | TA = –40°C 至 125°C | 6 | ||
| Maximum capacitive load | 1 | nF | 无持续振荡 | 6 | |||
| Output swing to GND | 0.005 | 0.05 | V | RL = 10kΩ 至 GND,TA= –40°C 至 125°C | 6 | ||
| Operating ambient temperature (natural convection) | TA | -40 | 125 | °C | 自然通风条件下的工作温度范围 | 5 | |
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Operating temperature range | -40 | 125 | °C | 6 | |||
| Gain (INA199x1) | G | 50 | V/V | INA199x1 | 6 | ||
| Junction-to-ambient thermal resistance (RSW, UQFN) | RθJA | 107.3 | °C/W | RSW (UQFN) 10 引脚 | 5 | ||
| Junction-to-case (top) thermal resistance (RSW, UQFN) | RθJC(top) | 56.5 | °C/W | RSW (UQFN) 10 引脚 | 5 | ||
| Junction-to-board thermal resistance (RSW, UQFN) | RθJB | 18.7 | °C/W | RSW (UQFN) 10 引脚 | 5 | ||
| Junction-to-top characterization parameter (RSW, UQFN) | ψJT | 1.1 | °C/W | RSW (UQFN) 10 引脚 | 5 | ||
| Junction-to-board characterization parameter (RSW, UQFN) | ψJB | 18.7 | °C/W | RSW (UQFN) 10 引脚 | 5 |
CAD (KiCad official)
- Symbol:
INA199B1RSWR - Footprint:
Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm - 3D model: UQFN-10(1.4x1.8) (KiCad packages3D, STEP)
- 3D model files:
ina199b1rswr-etched.step/ina199b1rswr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina199b1rswr.step/ina199b1rswr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
f48fb5be37c0cf43, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).