component
INA199B1RSWR
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, UQFN-10(1.4x1.8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA199B1RSWR
Texas Instruments · Current Sense Amplifiers · UQFN-10(1.4x1.8)
INA199B1RSWR from Texas Instruments, in a UQFN-10(1.4x1.8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; may be left floating or connected to any voltage between GND and V+. |
| 2 | IN+ | input | Analog input connected to the power side of the shunt resistor; dual IN+ pins must be tied together; common mode input range -0.1V to 26V. |
| 3 | IN+ | input | Analog input connected to the power side of the shunt resistor; dual IN+ pins must be tied together; common mode input range -0.1V to 26V. |
| 4 | IN- | input | Analog input connected to the load side of the shunt resistor; dual IN- pins must be tied together; common mode input range -0.1V to 26V. |
| 5 | IN- | input | Analog input connected to the load side of the shunt resistor; dual IN- pins must be tied together; common mode input range -0.1V to 26V. |
| 6 | V+ | power_in | Analog power supply; operating voltage range 2.7V to 26V; sets the upper output range limit. |
| 7 | NC | unconnected | No internal connection; may be left floating or connected to any voltage between GND and V+. |
| 8 | REF | input | Reference voltage input; voltage range 0V to V+; sets the output offset voltage for single or bidirectional current measurement. |
| 9 | GND | power_in | Analog ground; reference point for all voltage measurements. |
| 10 | OUT | output | Analog output voltage; output swing limited to (V+)-0.05V to (V+)-0.2V relative to V+, and (GND)+0.005V to (GND)+0.05V relative to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.4x1.8) |
| Category | Amplifiers/Comparators |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
INA199B1RSWR - Footprint:
Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm - 3D model: UQFN-10(1.4x1.8) (KiCad packages3D, STEP)
- 3D model files:
ina199b1rswr-etched.step/ina199b1rswr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina199b1rswr.step/ina199b1rswr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
f48fb5be37c0cf43, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).