main
Ray
Initial commit: component/ina186a5idckr
8a5243c
INA186A5IDCKR
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA186A5IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input for external voltage biasing; enables bidirectional current detection through externally applied voltage between GND and VS. |
| 2 | GND | power_in | Analog ground reference. |
| 3 | VS | power_in | Analog power supply; operating voltage range 1.7V to 5.5V. |
| 4 | IN+ | input | Current sense amplifier positive input with common-mode range -0.2V to +40V; connect to sense resistor bus voltage side (high-side sensing) or load side (low-side sensing). |
| 5 | IN- | input | Current sense amplifier negative input with common-mode range -0.2V to +40V; connect to sense resistor load side (high-side sensing) or ground side (low-side sensing). |
| 6 | OUT | output | Analog output providing voltage equal to gain × differential voltage (IN+ - IN-) plus reference voltage offset; output swing approximately (VS - 40mV) to (GND + 1mV). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
INA186A5IDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina186a5idckr-etched.step/ina186a5idckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina186a5idckr.step/ina186a5idckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
c1bdab2e3ee3efb4, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA186A5IDCKR
**Texas Instruments** · Current Sense Amplifiers · SC-70-6
INA186A5IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input for external voltage biasing; enables bidirectional current detection through externally applied voltage between GND and VS. |
| 2 | GND | power_in | Analog ground reference. |
| 3 | VS | power_in | Analog power supply; operating voltage range 1.7V to 5.5V. |
| 4 | IN+ | input | Current sense amplifier positive input with common-mode range -0.2V to +40V; connect to sense resistor bus voltage side (high-side sensing) or load side (low-side sensing). |
| 5 | IN- | input | Current sense amplifier negative input with common-mode range -0.2V to +40V; connect to sense resistor load side (high-side sensing) or ground side (low-side sensing). |
| 6 | OUT | output | Analog output providing voltage equal to gain × differential voltage (IN+ - IN-) plus reference voltage offset; output swing approximately (VS - 40mV) to (GND + 1mV). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
## CAD (KiCad official)
- Symbol: `INA186A5IDCKR`
- Footprint: `Package_TO_SOT_SMD:SOT-363_SC-70-6`
- 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files: `ina186a5idckr-etched.step` / `ina186a5idckr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina186a5idckr.step` / `ina186a5idckr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina186) (48 pp, sha256 `c1bdab2e3ee3efb4`, retrieved 2026-09-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina186a5idckr-datasheet.pdf)