component
INA186A5IDCKR
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA186A5IDCKR
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA186A5IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input for external voltage biasing; enables bidirectional current detection through externally applied voltage between GND and VS. |
| 2 | GND | power_in | Analog ground reference. |
| 3 | VS | power_in | Analog power supply; operating voltage range 1.7V to 5.5V. |
| 4 | IN+ | input | Current sense amplifier positive input with common-mode range -0.2V to +40V; connect to sense resistor bus voltage side (high-side sensing) or load side (low-side sensing). |
| 5 | IN- | input | Current sense amplifier negative input with common-mode range -0.2V to +40V; connect to sense resistor load side (high-side sensing) or ground side (low-side sensing). |
| 6 | OUT | output | Analog output providing voltage equal to gain × differential voltage (IN+ - IN-) plus reference voltage offset; output swing approximately (VS - 40mV) to (GND + 1mV). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
INA186A5IDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina186a5idckr-etched.step/ina186a5idckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina186a5idckr.step/ina186a5idckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
c1bdab2e3ee3efb4, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).