main
Ray
ina186a4qdckrq1: specified limits as data (metadata.characteristics, 33 rows from the datasheet)
815f3aa
INA186A4QDCKRQ1
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA186A4QDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input for bidirectional current detection; apply voltage from GND to VS to set zero-current output level. |
| 2 | GND | power_in | Analog ground. |
| 3 | VS | power_in | Power supply, operating range 1.7 V to 5.5 V. |
| 4 | IN+ | input | Current sensing amplifier non-inverting input; connect to bus-voltage side for high-side sensing or load side for low-side sensing. |
| 5 | IN- | input | Current sensing amplifier inverting input; connect to load side for high-side sensing or ground side for low-side sensing. |
| 6 | OUT | output | Analog voltage output; provides gain-multiplied voltage of (IN+ - IN-) plus offset voltage applied to REF pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VS 电源电压 | VS | 6 | V | 4 | |||
| 模拟输入差分电压 (VIN+) – (VIN–) | VIN+, VIN– | -42 | 42 | V | 4 | ||
| 模拟输入电压,相对于 GND | VIN+, VIN– | 42 | V | 4 | |||
| ENABLE 引脚电压,相对于 GND | VENABLE | 6 | V | 4 | |||
| 进入任一引脚的输入电流 | 5 | mA | 4 | ||||
| TA 工作温度 | TA | -55 | 150 | °C | 4 | ||
| TJ 结温 | TJ | 150 | °C | 4 | |||
| Tstg 存储温度 | Tstg | -65 | 150 | °C | 4 | ||
| VCM 共模输入范围 | VCM | 40 | V | 4 | |||
| VIN+,VIN– 输入引脚电压范围 | VIN+, VIN– | 40 | V | 4 | |||
| VS 运行电源电压 | VS | 1.7 | 5.5 | V | 4 | ||
| TA 自然通风工作温度 | TA | -40 | 125 | °C | 4 | ||
| CMRR 共模抑制比 | CMRR | 120 | 150 | dB | VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C | 5 | |
| VOS 失调电压,RTI | VOS | -50 | -3 | 50 | µV | VS = 1.8V,VSENSE = 0mV | 5 |
| dVOS/dT 温漂,RTI | dVOS/dT | 0.05 | 0.5 | µV/°C | VSENSE = 0V,TA = –40°C 至 +125°C | 5 | |
| PSRR 电源抑制比,RTI | PSRR | -10 | -1 | 10 | µV/V | VSENSE = 0mV,VS = 1.7V 至 5.5V | 5 |
| IIB 输入偏置电流 | IIB | 0.5 | 3 | nA | VSENSE = 0mV | 5 | |
| EG 增益误差 | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V 至 VS – 0.1 V | 5 |
| 增益误差漂移 | 2 | 10 | ppm/°C | TA=-40°C 至 +125°C | 5 | ||
| RVRR 基准电压抑制比,RTI | RVRR | -10 | 2 | 10 | µV/V | VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C | 5 |
| 最大容性负载 | 1 | nF | 无持续振荡 | 5 | |||
| IEN 输入漏电流 | IEN | 1 | 100 | nA | 0V ≤ VENABLE ≤ VS | 5 | |
| VIH 高电平输入电压 | VIH | 6 | V | 5 | |||
| VIL 低电平输入电压 | VIL | 0 | V | 5 | |||
| IODIS 输出泄漏已禁用 | IODIS | 1 | 5 | µA | VS = 5.0V,VOUT = 0V 至 5.0V,VENABLE = 0V | 5 | |
| IQ 静态电流 | IQ | 48 | 65 | µA | VS = 1.8V,VSENSE = 0mV | 5 | |
| IQ 静态电流 (TA = –40°C 至 +125°C) | IQ | 90 | µA | VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C | 5 | ||
| IQDIS 静态电流已禁用 | IQDIS | 10 | 100 | nA | VENABLE = 0V,VSENSE = 0mV | 6 | |
| 热阻,结至环境 (DCK SC70 6 引脚) | RqJA | 170.7 | °C/W | DCK (SC70) 6 引脚列 | 4 | ||
| 热阻,结至外壳(顶部) (DCK SC70 6 引脚) | RqJC(top) | 132.7 | °C/W | DCK (SC70) 6 引脚列 | 4 | ||
| 热阻,结至电路板 (DCK SC70 6 引脚) | RqJB | 65.3 | °C/W | DCK (SC70) 6 引脚列 | 4 | ||
| 结至顶部特征参数 (DCK SC70 6 引脚) | YJT | 45.7 | °C/W | DCK (SC70) 6 引脚列 | 4 | ||
| 结至电路板特征参数 (DCK SC70 6 引脚) | YJB | 65.2 | °C/W | DCK (SC70) 6 引脚列 | 4 |
CAD (KiCad official)
- Symbol:
INA186A4QDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina186a4qdckrq1-etched.step/ina186a4qdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina186a4qdckrq1.step/ina186a4qdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
bf49559207ff65a8, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA186A4QDCKRQ1
**Texas Instruments** · Current Sense Amplifiers · SC-70-6
INA186A4QDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input for bidirectional current detection; apply voltage from GND to VS to set zero-current output level. |
| 2 | GND | power_in | Analog ground. |
| 3 | VS | power_in | Power supply, operating range 1.7 V to 5.5 V. |
| 4 | IN+ | input | Current sensing amplifier non-inverting input; connect to bus-voltage side for high-side sensing or load side for low-side sensing. |
| 5 | IN- | input | Current sensing amplifier inverting input; connect to load side for high-side sensing or ground side for low-side sensing. |
| 6 | OUT | output | Analog voltage output; provides gain-multiplied voltage of (IN+ - IN-) plus offset voltage applied to REF pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VS 电源电压 | VS | | | 6 | V | | 4 |
| 模拟输入差分电压 (VIN+) – (VIN–) | VIN+, VIN– | -42 | | 42 | V | | 4 |
| 模拟输入电压,相对于 GND | VIN+, VIN– | | | 42 | V | | 4 |
| ENABLE 引脚电压,相对于 GND | VENABLE | | | 6 | V | | 4 |
| 进入任一引脚的输入电流 | | | | 5 | mA | | 4 |
| TA 工作温度 | TA | -55 | | 150 | °C | | 4 |
| TJ 结温 | TJ | | | 150 | °C | | 4 |
| Tstg 存储温度 | Tstg | -65 | | 150 | °C | | 4 |
| VCM 共模输入范围 | VCM | | | 40 | V | | 4 |
| VIN+,VIN– 输入引脚电压范围 | VIN+, VIN– | | | 40 | V | | 4 |
| VS 运行电源电压 | VS | 1.7 | | 5.5 | V | | 4 |
| TA 自然通风工作温度 | TA | -40 | | 125 | °C | | 4 |
| CMRR 共模抑制比 | CMRR | 120 | 150 | | dB | VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C | 5 |
| VOS 失调电压,RTI | VOS | -50 | -3 | 50 | µV | VS = 1.8V,VSENSE = 0mV | 5 |
| dVOS/dT 温漂,RTI | dVOS/dT | | 0.05 | 0.5 | µV/°C | VSENSE = 0V,TA = –40°C 至 +125°C | 5 |
| PSRR 电源抑制比,RTI | PSRR | -10 | -1 | 10 | µV/V | VSENSE = 0mV,VS = 1.7V 至 5.5V | 5 |
| IIB 输入偏置电流 | IIB | | 0.5 | 3 | nA | VSENSE = 0mV | 5 |
| EG 增益误差 | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V 至 VS – 0.1 V | 5 |
| 增益误差漂移 | | | 2 | 10 | ppm/°C | TA=-40°C 至 +125°C | 5 |
| RVRR 基准电压抑制比,RTI | RVRR | -10 | 2 | 10 | µV/V | VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C | 5 |
| 最大容性负载 | | | | 1 | nF | 无持续振荡 | 5 |
| IEN 输入漏电流 | IEN | | 1 | 100 | nA | 0V ≤ VENABLE ≤ VS | 5 |
| VIH 高电平输入电压 | VIH | | | 6 | V | | 5 |
| VIL 低电平输入电压 | VIL | 0 | | | V | | 5 |
| IODIS 输出泄漏已禁用 | IODIS | | 1 | 5 | µA | VS = 5.0V,VOUT = 0V 至 5.0V,VENABLE = 0V | 5 |
| IQ 静态电流 | IQ | | 48 | 65 | µA | VS = 1.8V,VSENSE = 0mV | 5 |
| IQ 静态电流 (TA = –40°C 至 +125°C) | IQ | | | 90 | µA | VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C | 5 |
| IQDIS 静态电流已禁用 | IQDIS | | 10 | 100 | nA | VENABLE = 0V,VSENSE = 0mV | 6 |
| 热阻,结至环境 (DCK SC70 6 引脚) | RqJA | | 170.7 | | °C/W | DCK (SC70) 6 引脚列 | 4 |
| 热阻,结至外壳(顶部) (DCK SC70 6 引脚) | RqJC(top) | | 132.7 | | °C/W | DCK (SC70) 6 引脚列 | 4 |
| 热阻,结至电路板 (DCK SC70 6 引脚) | RqJB | | 65.3 | | °C/W | DCK (SC70) 6 引脚列 | 4 |
| 结至顶部特征参数 (DCK SC70 6 引脚) | YJT | | 45.7 | | °C/W | DCK (SC70) 6 引脚列 | 4 |
| 结至电路板特征参数 (DCK SC70 6 引脚) | YJB | | 65.2 | | °C/W | DCK (SC70) 6 引脚列 | 4 |
## CAD (KiCad official)
- Symbol: `INA186A4QDCKRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-363_SC-70-6`
- 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files: `ina186a4qdckrq1-etched.step` / `ina186a4qdckrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina186a4qdckrq1.step` / `ina186a4qdckrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina186-q1) (45 pp, sha256 `bf49559207ff65a8`, retrieved 2026-09-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina186a4qdckrq1-datasheet.pdf)