main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina186a4qdckrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina186a4qdckrq1: viewers · Ray
ina186a4qdckrq1-etched.fit.json ina186a4qdckrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina186a4qdckrq1-etched.glb ina186a4qdckrq1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
ina186a4qdckrq1-etched.step ina186a4qdckrq1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
ina186a4qdckrq1-hero.glb ina186a4qdckrq1: hero from the plain model · Ray
ina186a4qdckrq1-hero.overlay.json ina186a4qdckrq1: hero from the plain model · Ray
ina186a4qdckrq1.glb Publish 0.1.0 · Ray
ina186a4qdckrq1.kicad_mod Publish 0.1.0 · Ray
ina186a4qdckrq1.kicad_sym Publish 0.1.0 · Ray
ina186a4qdckrq1.lbr Publish 0.1.0 · Ray
ina186a4qdckrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina186a4qdckrq1: specified limits as data (metadata.characteristics, 33 rows from the datasheet) · Ray

INA186A4QDCKRQ1

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA186A4QDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference input for bidirectional current detection; apply voltage from GND to VS to set zero-current output level.
2 GND power_in Analog ground.
3 VS power_in Power supply, operating range 1.7 V to 5.5 V.
4 IN+ input Current sensing amplifier non-inverting input; connect to bus-voltage side for high-side sensing or load side for low-side sensing.
5 IN- input Current sensing amplifier inverting input; connect to load side for high-side sensing or ground side for low-side sensing.
6 OUT output Analog voltage output; provides gain-multiplied voltage of (IN+ - IN-) plus offset voltage applied to REF pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VS 电源电压 VS 6 V 4
模拟输入差分电压 (VIN+) – (VIN–) VIN+, VIN– -42 42 V 4
模拟输入电压,相对于 GND VIN+, VIN– 42 V 4
ENABLE 引脚电压,相对于 GND VENABLE 6 V 4
进入任一引脚的输入电流 5 mA 4
TA 工作温度 TA -55 150 °C 4
TJ 结温 TJ 150 °C 4
Tstg 存储温度 Tstg -65 150 °C 4
VCM 共模输入范围 VCM 40 V 4
VIN+,VIN– 输入引脚电压范围 VIN+, VIN– 40 V 4
VS 运行电源电压 VS 1.7 5.5 V 4
TA 自然通风工作温度 TA -40 125 °C 4
CMRR 共模抑制比 CMRR 120 150 dB VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C 5
VOS 失调电压,RTI VOS -50 -3 50 µV VS = 1.8V,VSENSE = 0mV 5
dVOS/dT 温漂,RTI dVOS/dT 0.05 0.5 µV/°C VSENSE = 0V,TA = –40°C 至 +125°C 5
PSRR 电源抑制比,RTI PSRR -10 -1 10 µV/V VSENSE = 0mV,VS = 1.7V 至 5.5V 5
IIB 输入偏置电流 IIB 0.5 3 nA VSENSE = 0mV 5
EG 增益误差 EG -1 -0.04 1 % VOUT = 0.1 V 至 VS – 0.1 V 5
增益误差漂移 2 10 ppm/°C TA=-40°C 至 +125°C 5
RVRR 基准电压抑制比,RTI RVRR -10 2 10 µV/V VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C 5
最大容性负载 1 nF 无持续振荡 5
IEN 输入漏电流 IEN 1 100 nA 0V ≤ VENABLE ≤ VS 5
VIH 高电平输入电压 VIH 6 V 5
VIL 低电平输入电压 VIL 0 V 5
IODIS 输出泄漏已禁用 IODIS 1 5 µA VS = 5.0V,VOUT = 0V 至 5.0V,VENABLE = 0V 5
IQ 静态电流 IQ 48 65 µA VS = 1.8V,VSENSE = 0mV 5
IQ 静态电流 (TA = –40°C 至 +125°C) IQ 90 µA VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C 5
IQDIS 静态电流已禁用 IQDIS 10 100 nA VENABLE = 0V,VSENSE = 0mV 6
热阻,结至环境 (DCK SC70 6 引脚) RqJA 170.7 °C/W DCK (SC70) 6 引脚列 4
热阻,结至外壳(顶部) (DCK SC70 6 引脚) RqJC(top) 132.7 °C/W DCK (SC70) 6 引脚列 4
热阻,结至电路板 (DCK SC70 6 引脚) RqJB 65.3 °C/W DCK (SC70) 6 引脚列 4
结至顶部特征参数 (DCK SC70 6 引脚) YJT 45.7 °C/W DCK (SC70) 6 引脚列 4
结至电路板特征参数 (DCK SC70 6 引脚) YJB 65.2 °C/W DCK (SC70) 6 引脚列 4

CAD (KiCad official)

  • Symbol: INA186A4QDCKRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina186a4qdckrq1-etched.step / ina186a4qdckrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina186a4qdckrq1.step / ina186a4qdckrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 bf49559207ff65a8, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF