main
Ray
ina186a3iddfr: specified limits as data (metadata.characteristics, 43 rows from the datasheet)
c5496e1
INA186A3IDDFR
Texas Instruments · Current Sense Amplifiers · TSOT-23-8
INA186A3IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Power supply pin; supply voltage 1.7 V to 5.5 V. |
| 2 | ENABLE | input | Digital enable input pin; when driven to VS the device turns on as current sensing amplifier, when driven to GND the device turns off with reduced power current and output in high impedance state; must be externally driven or connected to VS if unused. |
| 3 | REF | input | Analog reference input pin; enables bidirectional current sensing through externally applied voltage; available only in DDF and DCK packages. |
| 4 | GND | power_in | Analog ground. |
| 5 | OUT | output | Analog output pin; provides voltage output equal to gain times differential voltage between IN+ and IN-, offset by voltage applied to REF pin. |
| 6 | NC | unconnected | No internal connection; can be left floating, grounded, or connected to supply voltage. |
| 7 | IN+ | input | Current sensing amplifier positive input; for high-side applications connect to bus voltage side of sense resistor; for low-side applications connect to load side. |
| 8 | IN- | input | Current sensing amplifier negative input; for high-side applications connect to load side of sense resistor; for low-side applications connect to ground side. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 6 | V | 4 | |||
| Differential input voltage (VIN+) – (VIN–) | VIN+, VIN– | -42 | 42 | V | 4 | ||
| Analog input voltage VIN+, VIN– relative to GND | VIN+, VIN– | 42 | V | 4 | |||
| ENABLE pin voltage | VENABLE | 6 | V | 4 | |||
| Input current into any pin | 5 | mA | 4 | ||||
| Operating temperature (absolute maximum) | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input voltage | VCM | 40 | V | 4 | |||
| Input pin voltage range VIN+, VIN– | VIN+, VIN– | 40 | V | 4 | |||
| Operating supply voltage | VS | 1.7 | 5.5 | V | 4 | ||
| Operating temperature (natural ventilation) | TA | -40 | 125 | °C | 4 | ||
| Common-mode rejection ratio | CMRR | 120 | 150 | dB | VSENSE = 0mV, VIN+ = -0.1V to 40V, TA = -40°C to +125°C | 5 | |
| Input offset voltage, RTI | VOS | -50 | -3 | 50 | µV | VS = 1.8V, VSENSE = 0mV | 5 |
| Input offset voltage drift, RTI | dVOS/dT | 0.05 | 0.5 | µV/°C | VSENSE = 0V, TA = -40°C to +125°C | 5 | |
| Power-supply rejection ratio, RTI | PSRR | -10 | -1 | 10 | µV/V | VSENSE = 0mV, VS = 1.7V to 5.5V | 5 |
| Input bias current | IIB | 0.5 | 3 | nA | VSENSE = 0mV | 5 | |
| Input offset current | IIO | -0.07 | 0.07 | nA | VSENSE = 0mV | 5 | |
| Gain error | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V to VS – 0.1 V | 5 |
| Gain error drift | 2 | 10 | ppm/°C | TA=-40°C to +125°C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.1 V to VS – 0.1 V | 5 | ||
| Reference voltage rejection ratio, RTI | RVRR | -10 | 2 | 10 | µV/V | VREF = 100mV to VS – 100mV, TA = -40°C to +125°C | 5 |
| Maximum capacitive load | 1 | nF | No sustained oscillation | 5 | |||
| Voltage swing to GND | VSN | 0.05 | 1 | mV | VS = 1.8V, RL = 10kΩ to GND, TA = -40°C to +125°C, VSENSE = -10mV, VREF = 0V | 5 | |
| Zero-current output voltage | VZL | 2 | 10 | mV | VS = 1.8V, RL = 10kΩ to GND, TA = -40°C to +125°C, VSENSE = 0mV, VREF = 0V | 5 | |
| ENABLE input leakage current | IEN | 1 | 100 | nA | 0V ≤ VENABLE ≤ VS | 5 | |
| High-level input voltage (DDF package) | VIH | 6 | V | DDF package | 5 | ||
| Low-level input voltage (DDF package) | VIL | 0 | V | DDF package | 5 | ||
| Output leakage when disabled | IODIS | 1 | 5 | µA | VS = 5.0V, VOUT = 0V to 5.0V, VENABLE = 0V | 5 | |
| Quiescent current | IQ | 48 | 65 | µA | VS = 1.8V, VSENSE = 0mV | 6 | |
| Quiescent current over temperature | IQ | 90 | µA | VS = 1.8V, VSENSE = 0mV, TA = -40°C to +125°C | 6 | ||
| Quiescent current when disabled | IQDIS | 10 | 100 | nA | VENABLE = 0V, VSENSE = 0mV | 6 | |
| Gain (A3 device) | G | 100 | V/V | A3 device | 5 | ||
| Bandwidth (A3 device) | BW | 35 | kHz | A3 device, CLOAD = 10pF | 5 | ||
| Slew rate | SR | 0.3 | V/µs | VS = 5.0V, VOUT = 0.5V to 4.5V | 5 | ||
| Settling time | tS | 30 | µs | From current step to within 1% of final value | 5 | ||
| Voltage noise density, RTI | 75 | nV/√Hz | 5 | ||||
| ENABLE hysteresis (DDF package) | VHYS | 300 | mV | DDF package | 5 | ||
| Junction-to-ambient thermal resistance (DDF, 8-pin) | RθJA | 137.2 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DDF, 8-pin) | RθJC(top) | 38.4 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DDF, 8-pin) | RθJB | 57.1 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DDF, 8-pin) | ΨJT | 5.1 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DDF, 8-pin) | ΨJB | 56.6 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
INA186A3IDDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina186a3iddfr-etched.step/ina186a3iddfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina186a3iddfr.step/ina186a3iddfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
c1bdab2e3ee3efb4, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA186A3IDDFR
**Texas Instruments** · Current Sense Amplifiers · TSOT-23-8
INA186A3IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Power supply pin; supply voltage 1.7 V to 5.5 V. |
| 2 | ENABLE | input | Digital enable input pin; when driven to VS the device turns on as current sensing amplifier, when driven to GND the device turns off with reduced power current and output in high impedance state; must be externally driven or connected to VS if unused. |
| 3 | REF | input | Analog reference input pin; enables bidirectional current sensing through externally applied voltage; available only in DDF and DCK packages. |
| 4 | GND | power_in | Analog ground. |
| 5 | OUT | output | Analog output pin; provides voltage output equal to gain times differential voltage between IN+ and IN-, offset by voltage applied to REF pin. |
| 6 | NC | unconnected | No internal connection; can be left floating, grounded, or connected to supply voltage. |
| 7 | IN+ | input | Current sensing amplifier positive input; for high-side applications connect to bus voltage side of sense resistor; for low-side applications connect to load side. |
| 8 | IN- | input | Current sensing amplifier negative input; for high-side applications connect to load side of sense resistor; for low-side applications connect to ground side. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | | | 6 | V | | 4 |
| Differential input voltage (VIN+) – (VIN–) | VIN+, VIN– | -42 | | 42 | V | | 4 |
| Analog input voltage VIN+, VIN– relative to GND | VIN+, VIN– | | | 42 | V | | 4 |
| ENABLE pin voltage | VENABLE | | | 6 | V | | 4 |
| Input current into any pin | | | | 5 | mA | | 4 |
| Operating temperature (absolute maximum) | TA | -55 | | 150 | °C | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Common-mode input voltage | VCM | | | 40 | V | | 4 |
| Input pin voltage range VIN+, VIN– | VIN+, VIN– | | | 40 | V | | 4 |
| Operating supply voltage | VS | 1.7 | | 5.5 | V | | 4 |
| Operating temperature (natural ventilation) | TA | -40 | | 125 | °C | | 4 |
| Common-mode rejection ratio | CMRR | 120 | 150 | | dB | VSENSE = 0mV, VIN+ = -0.1V to 40V, TA = -40°C to +125°C | 5 |
| Input offset voltage, RTI | VOS | -50 | -3 | 50 | µV | VS = 1.8V, VSENSE = 0mV | 5 |
| Input offset voltage drift, RTI | dVOS/dT | | 0.05 | 0.5 | µV/°C | VSENSE = 0V, TA = -40°C to +125°C | 5 |
| Power-supply rejection ratio, RTI | PSRR | -10 | -1 | 10 | µV/V | VSENSE = 0mV, VS = 1.7V to 5.5V | 5 |
| Input bias current | IIB | | 0.5 | 3 | nA | VSENSE = 0mV | 5 |
| Input offset current | IIO | -0.07 | | 0.07 | nA | VSENSE = 0mV | 5 |
| Gain error | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V to VS – 0.1 V | 5 |
| Gain error drift | | | 2 | 10 | ppm/°C | TA=-40°C to +125°C | 5 |
| Nonlinearity error | | -0.01 | | 0.01 | % | VOUT = 0.1 V to VS – 0.1 V | 5 |
| Reference voltage rejection ratio, RTI | RVRR | -10 | 2 | 10 | µV/V | VREF = 100mV to VS – 100mV, TA = -40°C to +125°C | 5 |
| Maximum capacitive load | | | | 1 | nF | No sustained oscillation | 5 |
| Voltage swing to GND | VSN | | 0.05 | 1 | mV | VS = 1.8V, RL = 10kΩ to GND, TA = -40°C to +125°C, VSENSE = -10mV, VREF = 0V | 5 |
| Zero-current output voltage | VZL | | 2 | 10 | mV | VS = 1.8V, RL = 10kΩ to GND, TA = -40°C to +125°C, VSENSE = 0mV, VREF = 0V | 5 |
| ENABLE input leakage current | IEN | | 1 | 100 | nA | 0V ≤ VENABLE ≤ VS | 5 |
| High-level input voltage (DDF package) | VIH | | | 6 | V | DDF package | 5 |
| Low-level input voltage (DDF package) | VIL | 0 | | | V | DDF package | 5 |
| Output leakage when disabled | IODIS | | 1 | 5 | µA | VS = 5.0V, VOUT = 0V to 5.0V, VENABLE = 0V | 5 |
| Quiescent current | IQ | | 48 | 65 | µA | VS = 1.8V, VSENSE = 0mV | 6 |
| Quiescent current over temperature | IQ | | | 90 | µA | VS = 1.8V, VSENSE = 0mV, TA = -40°C to +125°C | 6 |
| Quiescent current when disabled | IQDIS | | 10 | 100 | nA | VENABLE = 0V, VSENSE = 0mV | 6 |
| Gain (A3 device) | G | | 100 | | V/V | A3 device | 5 |
| Bandwidth (A3 device) | BW | | 35 | | kHz | A3 device, CLOAD = 10pF | 5 |
| Slew rate | SR | | 0.3 | | V/µs | VS = 5.0V, VOUT = 0.5V to 4.5V | 5 |
| Settling time | tS | | 30 | | µs | From current step to within 1% of final value | 5 |
| Voltage noise density, RTI | | | 75 | | nV/√Hz | | 5 |
| ENABLE hysteresis (DDF package) | VHYS | | 300 | | mV | DDF package | 5 |
| Junction-to-ambient thermal resistance (DDF, 8-pin) | RθJA | | 137.2 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance (DDF, 8-pin) | RθJC(top) | | 38.4 | | °C/W | | 4 |
| Junction-to-board thermal resistance (DDF, 8-pin) | RθJB | | 57.1 | | °C/W | | 4 |
| Junction-to-top characterization parameter (DDF, 8-pin) | ΨJT | | 5.1 | | °C/W | | 4 |
| Junction-to-board characterization parameter (DDF, 8-pin) | ΨJB | | 56.6 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `INA186A3IDDFR`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `ina186a3iddfr-etched.step` / `ina186a3iddfr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina186a3iddfr.step` / `ina186a3iddfr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina186) (48 pp, sha256 `c1bdab2e3ee3efb4`, retrieved 2026-09-24, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina186a3iddfr-datasheet.pdf)