main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina186a3iddfr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina186a3iddfr: viewers · Ray
ina186a3iddfr-etched.fit.json ina186a3iddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina186a3iddfr-etched.glb ina186a3iddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina186a3iddfr-etched.step ina186a3iddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina186a3iddfr-hero.glb ina186a3iddfr: hero from the plain model · Ray
ina186a3iddfr-hero.overlay.json ina186a3iddfr: hero from the plain model · Ray
ina186a3iddfr.glb Publish 0.1.0 · Ray
ina186a3iddfr.kicad_mod Publish 0.1.0 · Ray
ina186a3iddfr.kicad_sym Publish 0.1.0 · Ray
ina186a3iddfr.lbr Publish 0.1.0 · Ray
ina186a3iddfr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina186a3iddfr: specified limits as data (metadata.characteristics, 43 rows from the datasheet) · Ray

INA186A3IDDFR

Texas Instruments · Current Sense Amplifiers · TSOT-23-8

INA186A3IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Power supply pin; supply voltage 1.7 V to 5.5 V.
2 ENABLE input Digital enable input pin; when driven to VS the device turns on as current sensing amplifier, when driven to GND the device turns off with reduced power current and output in high impedance state; must be externally driven or connected to VS if unused.
3 REF input Analog reference input pin; enables bidirectional current sensing through externally applied voltage; available only in DDF and DCK packages.
4 GND power_in Analog ground.
5 OUT output Analog output pin; provides voltage output equal to gain times differential voltage between IN+ and IN-, offset by voltage applied to REF pin.
6 NC unconnected No internal connection; can be left floating, grounded, or connected to supply voltage.
7 IN+ input Current sensing amplifier positive input; for high-side applications connect to bus voltage side of sense resistor; for low-side applications connect to load side.
8 IN- input Current sensing amplifier negative input; for high-side applications connect to load side of sense resistor; for low-side applications connect to ground side.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 6 V 4
Differential input voltage (VIN+) – (VIN–) VIN+, VIN– -42 42 V 4
Analog input voltage VIN+, VIN– relative to GND VIN+, VIN– 42 V 4
ENABLE pin voltage VENABLE 6 V 4
Input current into any pin 5 mA 4
Operating temperature (absolute maximum) TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input voltage VCM 40 V 4
Input pin voltage range VIN+, VIN– VIN+, VIN– 40 V 4
Operating supply voltage VS 1.7 5.5 V 4
Operating temperature (natural ventilation) TA -40 125 °C 4
Common-mode rejection ratio CMRR 120 150 dB VSENSE = 0mV, VIN+ = -0.1V to 40V, TA = -40°C to +125°C 5
Input offset voltage, RTI VOS -50 -3 50 µV VS = 1.8V, VSENSE = 0mV 5
Input offset voltage drift, RTI dVOS/dT 0.05 0.5 µV/°C VSENSE = 0V, TA = -40°C to +125°C 5
Power-supply rejection ratio, RTI PSRR -10 -1 10 µV/V VSENSE = 0mV, VS = 1.7V to 5.5V 5
Input bias current IIB 0.5 3 nA VSENSE = 0mV 5
Input offset current IIO -0.07 0.07 nA VSENSE = 0mV 5
Gain error EG -1 -0.04 1 % VOUT = 0.1 V to VS – 0.1 V 5
Gain error drift 2 10 ppm/°C TA=-40°C to +125°C 5
Nonlinearity error -0.01 0.01 % VOUT = 0.1 V to VS – 0.1 V 5
Reference voltage rejection ratio, RTI RVRR -10 2 10 µV/V VREF = 100mV to VS – 100mV, TA = -40°C to +125°C 5
Maximum capacitive load 1 nF No sustained oscillation 5
Voltage swing to GND VSN 0.05 1 mV VS = 1.8V, RL = 10kΩ to GND, TA = -40°C to +125°C, VSENSE = -10mV, VREF = 0V 5
Zero-current output voltage VZL 2 10 mV VS = 1.8V, RL = 10kΩ to GND, TA = -40°C to +125°C, VSENSE = 0mV, VREF = 0V 5
ENABLE input leakage current IEN 1 100 nA 0V ≤ VENABLE ≤ VS 5
High-level input voltage (DDF package) VIH 6 V DDF package 5
Low-level input voltage (DDF package) VIL 0 V DDF package 5
Output leakage when disabled IODIS 1 5 µA VS = 5.0V, VOUT = 0V to 5.0V, VENABLE = 0V 5
Quiescent current IQ 48 65 µA VS = 1.8V, VSENSE = 0mV 6
Quiescent current over temperature IQ 90 µA VS = 1.8V, VSENSE = 0mV, TA = -40°C to +125°C 6
Quiescent current when disabled IQDIS 10 100 nA VENABLE = 0V, VSENSE = 0mV 6
Gain (A3 device) G 100 V/V A3 device 5
Bandwidth (A3 device) BW 35 kHz A3 device, CLOAD = 10pF 5
Slew rate SR 0.3 V/µs VS = 5.0V, VOUT = 0.5V to 4.5V 5
Settling time tS 30 µs From current step to within 1% of final value 5
Voltage noise density, RTI 75 nV/√Hz 5
ENABLE hysteresis (DDF package) VHYS 300 mV DDF package 5
Junction-to-ambient thermal resistance (DDF, 8-pin) RθJA 137.2 °C/W 4
Junction-to-case (top) thermal resistance (DDF, 8-pin) RθJC(top) 38.4 °C/W 4
Junction-to-board thermal resistance (DDF, 8-pin) RθJB 57.1 °C/W 4
Junction-to-top characterization parameter (DDF, 8-pin) ΨJT 5.1 °C/W 4
Junction-to-board characterization parameter (DDF, 8-pin) ΨJB 56.6 °C/W 4

CAD (KiCad official)

  • Symbol: INA186A3IDDFR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ina186a3iddfr-etched.step / ina186a3iddfr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina186a3iddfr.step / ina186a3iddfr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 c1bdab2e3ee3efb4, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF