main
History Download
Ray ina186a3idckt: specified limits as data (metadata.characteristics, 34 rows from the datasheet) e3ba121

INA186A3IDCKT

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA186A3IDCKT from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Analog reference input pin for bidirectional current detection through external voltage application; available only in DCK and DDF packages.
2 GND power_in Analog ground.
3 VS power_in Power supply, 1.7 V to 5.5 V.
4 IN+ input Positive input of current sensing amplifier; for high-side sensing connect to bus voltage side of sense resistor, for low-side sensing to load side.
5 IN- input Negative input of current sensing amplifier; for high-side sensing connect to load side of sense resistor, for low-side sensing to ground side.
6 OUT output Analog voltage output representing the gain-multiplied voltage difference from IN+ to IN- plus the voltage applied to REF pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS (absolute maximum) VS 6 V 4
Differential input voltage (VIN+) – (VIN–) VIN+, VIN- -42 42 V 4
Analog input voltage relative to GND VIN+, VIN- 42 V 4
Input current into any pin 5 mA 4
Operating temperature (absolute maximum) TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input range VCM 40 V 4
Input pin voltage range (VIN+, VIN–) VIN+, VIN- 40 V 4
Operating supply voltage VS 1.7 5.5 V 4
Ambient operating temperature (natural convection) TA -40 125 °C 4
Common-mode rejection ratio CMRR 120 150 dB VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C 5
Offset voltage, RTI VOS -50 -3 50 µV VS = 1.8V,VSENSE = 0mV 5
Offset voltage drift, RTI dVOS/dT 0.05 0.5 µV/°C VSENSE = 0V,TA = –40°C 至 +125°C 5
Power-supply rejection ratio, RTI PSRR -10 -1 10 µV/V VSENSE = 0mV,VS = 1.7V 至 5.5V 5
Input bias current IIB 0.5 3 nA VSENSE = 0mV 5
Input offset current IIO -0.07 0.07 nA VSENSE = 0mV 5
Gain (A3 device) G 100 V/V 5
Gain error EG -1 -0.04 1 % VOUT = 0.1 V 至 VS – 0.1 V 5
Gain error drift 2 10 ppm/°C TA = –40°C 至 +125°C 5
Nonlinearity error -0.01 0.01 % VOUT = 0.1 V 至 VS – 0.1 V 5
Reference voltage rejection ratio (maximum) RVRR -10 10 µV/V VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C 5
Maximum capacitive load 1 nF No sustained oscillation 5
Quiescent current IQ 48 65 µA VS = 1.8V,VSENSE = 0mV 6
Quiescent current over temperature IQ 90 µA VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C 6
Bandwidth (A3 device) BW 35 kHz CLOAD = 10pF 5
Slew rate SR 0.3 V/µs VS = 5.0V,VOUT = 0.5V 至 4.5V 5
Settling time tS 30 µs To within 1% of final value, from current step 5
Voltage noise density, RTI 75 nV/√Hz 5
Junction-to-ambient thermal resistance (DCK, SC70) RθJA 170.7 °C/W 4
Junction-to-case (top) thermal resistance (DCK, SC70) RθJC(top) 132.7 °C/W 4
Junction-to-board thermal resistance (DCK, SC70) RθJB 65.3 °C/W 4
Junction-to-top characterization parameter (DCK, SC70) ΨJT 45.7 °C/W 4
Junction-to-board characterization parameter (DCK, SC70) ΨJB 65.2 °C/W 4

CAD (KiCad official)

  • Symbol: INA186A3IDCKT
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina186a3idckt-etched.step / ina186a3idckt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina186a3idckt.step / ina186a3idckt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 c1bdab2e3ee3efb4, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF