Generated by kicad-footprint-generator · KiCad file format 20260206
INA186A3IDCKT
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA186A3IDCKT from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Analog reference input pin for bidirectional current detection through external voltage application; available only in DCK and DDF packages. |
| 2 | GND | power_in | Analog ground. |
| 3 | VS | power_in | Power supply, 1.7 V to 5.5 V. |
| 4 | IN+ | input | Positive input of current sensing amplifier; for high-side sensing connect to bus voltage side of sense resistor, for low-side sensing to load side. |
| 5 | IN- | input | Negative input of current sensing amplifier; for high-side sensing connect to load side of sense resistor, for low-side sensing to ground side. |
| 6 | OUT | output | Analog voltage output representing the gain-multiplied voltage difference from IN+ to IN- plus the voltage applied to REF pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VS (absolute maximum) | VS | 6 | V | 4 | |||
| Differential input voltage (VIN+) – (VIN–) | VIN+, VIN- | -42 | 42 | V | 4 | ||
| Analog input voltage relative to GND | VIN+, VIN- | 42 | V | 4 | |||
| Input current into any pin | 5 | mA | 4 | ||||
| Operating temperature (absolute maximum) | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range | VCM | 40 | V | 4 | |||
| Input pin voltage range (VIN+, VIN–) | VIN+, VIN- | 40 | V | 4 | |||
| Operating supply voltage | VS | 1.7 | 5.5 | V | 4 | ||
| Ambient operating temperature (natural convection) | TA | -40 | 125 | °C | 4 | ||
| Common-mode rejection ratio | CMRR | 120 | 150 | dB | VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C | 5 | |
| Offset voltage, RTI | VOS | -50 | -3 | 50 | µV | VS = 1.8V,VSENSE = 0mV | 5 |
| Offset voltage drift, RTI | dVOS/dT | 0.05 | 0.5 | µV/°C | VSENSE = 0V,TA = –40°C 至 +125°C | 5 | |
| Power-supply rejection ratio, RTI | PSRR | -10 | -1 | 10 | µV/V | VSENSE = 0mV,VS = 1.7V 至 5.5V | 5 |
| Input bias current | IIB | 0.5 | 3 | nA | VSENSE = 0mV | 5 | |
| Input offset current | IIO | -0.07 | 0.07 | nA | VSENSE = 0mV | 5 | |
| Gain (A3 device) | G | 100 | V/V | 5 | |||
| Gain error | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V 至 VS – 0.1 V | 5 |
| Gain error drift | 2 | 10 | ppm/°C | TA = –40°C 至 +125°C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.1 V 至 VS – 0.1 V | 5 | ||
| Reference voltage rejection ratio (maximum) | RVRR | -10 | 10 | µV/V | VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C | 5 | |
| Maximum capacitive load | 1 | nF | No sustained oscillation | 5 | |||
| Quiescent current | IQ | 48 | 65 | µA | VS = 1.8V,VSENSE = 0mV | 6 | |
| Quiescent current over temperature | IQ | 90 | µA | VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C | 6 | ||
| Bandwidth (A3 device) | BW | 35 | kHz | CLOAD = 10pF | 5 | ||
| Slew rate | SR | 0.3 | V/µs | VS = 5.0V,VOUT = 0.5V 至 4.5V | 5 | ||
| Settling time | tS | 30 | µs | To within 1% of final value, from current step | 5 | ||
| Voltage noise density, RTI | 75 | nV/√Hz | 5 | ||||
| Junction-to-ambient thermal resistance (DCK, SC70) | RθJA | 170.7 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DCK, SC70) | RθJC(top) | 132.7 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DCK, SC70) | RθJB | 65.3 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DCK, SC70) | ΨJT | 45.7 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DCK, SC70) | ΨJB | 65.2 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
INA186A3IDCKT - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina186a3idckt-etched.step/ina186a3idckt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina186a3idckt.step/ina186a3idckt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
c1bdab2e3ee3efb4, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).