main
Ray Publish 0.1.0 79c4e37
{
  "slug": "ina145ua-2k5",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Differential Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ina145ua",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina145ua-2k5.kicad_sym",
    "ina145ua-2k5.kicad_mod",
    "ina145ua-2k5.glb",
    "ina145ua-2k5.step",
    "ina145ua-2k5.lbr",
    "docs/hero.png",
    "docs/ina145ua-2k5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ina145ua-2k5-hero.glb",
    "ina145ua-2k5-hero.overlay.json",
    "ina145ua-2k5-etched.glb"
  ],
  "component": {
    "mpn": "INA145UA/2K5",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Differential Amplifiers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ina145.pdf",
    "parts": {
      "symbol": "ina145ua-2k5.kicad_sym",
      "footprint": "ina145ua-2k5.kicad_mod",
      "model_3d": "ina145ua-2k5-hero.glb",
      "model_3d_plain": "ina145ua-2k5-etched.glb",
      "model_3d_step": "ina145ua-2k5-etched.step",
      "model_3d_step_plain": "ina145ua-2k5.step",
      "lbr": "ina145ua-2k5.lbr"
    },
    "distributor_links": {
      "lcsc": "C544600",
      "digikey": "INA145UA-ND",
      "mouser": "595-INA145UA"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T02:17:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "INA145UA-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "595-INA145UA",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Ref",
        "type": "input",
        "description": "Reference terminal that a voltage can be applied to for offset trim, summed with the output; the source impedance should be less than 10Ω to maintain good common-mode rejection."
      },
      {
        "number": "2",
        "name": "VIN–",
        "type": "power_in",
        "description": "Inverting input to the internal precision input resistor network; source impedance at both inputs must be nearly equal to keep common-mode rejection (a 5Ω mismatch degrades typical CMR to about 72dB)."
      },
      {
        "number": "3",
        "name": "VIN+",
        "type": "power_in",
        "description": "Non-inverting input to the internal precision input resistor network; input common-mode range extends beyond the power supply rails, with CMR specified from VCM = -2.5V to +5.5V in single supply."
      },
      {
        "number": "4",
        "name": "V–",
        "type": "power_in",
        "description": "Negative power supply; dual supplies of ±2.25V to ±18V are specified (operating range ±1.35V to ±18V), and supply bypass capacitors should be placed close to this pin."
      },
      {
        "number": "5",
        "name": "RG",
        "type": "passive",
        "description": "Gain-setting connection for the external resistors RG1 and RG2, with gain G = 1 + RG2/RG1 programmable from 1 V/V to 1000 V/V."
      },
      {
        "number": "6",
        "name": "VO",
        "type": "output",
        "description": "Amplifier output, specified at RL = 100kΩ to swing from (V-)+0.15V to (V+)-1V at G = 1 and stable for capacitive loads up to 1000pF."
      },
      {
        "number": "7",
        "name": "V+",
        "type": "power_in",
        "description": "Positive power supply; single-supply operation is specified from +4.5V to +36V (operating down to +2.7V), and bypass capacitors should be placed close to this pin."
      },
      {
        "number": "8",
        "name": "VO1",
        "type": "output",
        "description": "Output of amplifier A1, connected to the non-inverting input of A2 through a 10kΩ resistor trimmed to ±1% absolute accuracy; the A2 input is available for filter or precision current source applications."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin numbers come from the SO-8 top-view pin configuration on page 4, which is extracted as a tex"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0796,
        "at": "2026-11-11T02:17:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ina145.pdf",
        "pages": 15,
        "sha256": "d1c59305a0b47bb8",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina145ua-2k5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina145ua-2k5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "72af825e59efa13e144b0a12a488c215a4b2077467f022ad46a53b275960ef95",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "D",
      "E1": {
        "nom_mm": 3.9,
        "range_mm": null
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": null
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": null
      },
      "source": "TI package designator D (no drawing in the datasheet)",
      "model_check": {
        "file": "ina145ua-2k5.step",
        "verdict": "SKIP",
        "reasons": [
          "the datasheet dimensions give no height or body size to compare"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}