main
Ray
ina132ua: laser-etched CAD + chip hero (factory 2.0.0 backfill)
6bbe52f
INA132UA
Texas Instruments · Differential OpAmps · SOIC-8
INA132UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Ref | input | Reference input pin. Sets the output voltage reference level; typically tied to ground for bipolar supplies or to mid-supply for single-supply operation. Connects to the internal 40kΩ resistor of the feedback network. |
| 2 | -In | input | Inverting differential input. Connects through an internal 40kΩ resistor to the op amp inverting node. Differential input impedance is 80kΩ typical. |
| 3 | +In | input | Non-inverting differential input. Connects through an internal 40kΩ resistor to the op amp non-inverting node. Differential input impedance is 80kΩ typical. |
| 4 | V- | power_in | Negative supply rail. Connect to -1.35V to -18V for dual-supply operation or to ground (0V) for single-supply operation. Total supply (V+ to V-) must not exceed 36V. |
| 5 | Sense | input | Output sense pin. Normally tied to the Output pin (pin 6) directly; can be used to Kelvin-sense the load or drive a booster stage inside the feedback loop. Connects to the internal 40kΩ feedback resistor network. |
| 6 | Output | output | Amplifier output. Delivers (V+In − V−In) + VRef at unity gain. Output current limit is typically ±12mA continuous; stable driving capacitive loads up to 10,000pF. |
| 7 | V+ | power_in | Positive supply rail. Accepts 2.7V to 36V single-supply or +1.35V to +18V dual-supply. Total supply (V+ to V-) must not exceed 36V. |
| 8 | NC | unconnected | No Internal Connection. Leave floating or tie to any convenient potential; not electrically connected to the die. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
INA132UAINA132UAUINA132UAPAINA132UAP
CAD (KiCad official)
- Symbol:
INA132UA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina132ua-etched.step/ina132ua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina132ua.step/ina132ua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (13 pp, sha256
e059058a7fdff4c7, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA132UA
**Texas Instruments** · Differential OpAmps · SOIC-8
INA132UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Ref | input | Reference input pin. Sets the output voltage reference level; typically tied to ground for bipolar supplies or to mid-supply for single-supply operation. Connects to the internal 40kΩ resistor of the feedback network. |
| 2 | -In | input | Inverting differential input. Connects through an internal 40kΩ resistor to the op amp inverting node. Differential input impedance is 80kΩ typical. |
| 3 | +In | input | Non-inverting differential input. Connects through an internal 40kΩ resistor to the op amp non-inverting node. Differential input impedance is 80kΩ typical. |
| 4 | V- | power_in | Negative supply rail. Connect to -1.35V to -18V for dual-supply operation or to ground (0V) for single-supply operation. Total supply (V+ to V-) must not exceed 36V. |
| 5 | Sense | input | Output sense pin. Normally tied to the Output pin (pin 6) directly; can be used to Kelvin-sense the load or drive a booster stage inside the feedback loop. Connects to the internal 40kΩ feedback resistor network. |
| 6 | Output | output | Amplifier output. Delivers (V+In − V−In) + VRef at unity gain. Output current limit is typically ±12mA continuous; stable driving capacitive loads up to 10,000pF. |
| 7 | V+ | power_in | Positive supply rail. Accepts 2.7V to 36V single-supply or +1.35V to +18V dual-supply. Total supply (V+ to V-) must not exceed 36V. |
| 8 | NC | unconnected | No Internal Connection. Leave floating or tie to any convenient potential; not electrically connected to the die. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `INA132UA`
- `INA132UAU`
- `INA132UAPA`
- `INA132UAP`
## CAD (KiCad official)
- Symbol: `INA132UA`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ina132ua-etched.step` / `ina132ua-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina132ua.step` / `ina132ua.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](docs/ina132ua-datasheet.pdf) (13 pp, sha256 `e059058a7fdff4c7`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina132ua-datasheet.pdf)